TH02 Temperature and Humidity Sensor
“
Product Information
Specifications:
- Size: 40*55mm
- Weight: 105g
- Type: Zigbee Temperature & Humidity Sensor
Product Usage Instructions
Adding Zigbee Devices
- You must add a gateway before adding Zigbee devices.
- To add a gateway, tap “Add Device” on the Home page.
- In the page that appears, tap “Gateway Control” on the
left-side of the Control page and select a gateway. - Power on the gateway and use an ethernet cable to connect it to
a router. - Ensure that your mobile phone and the gateway are under the
same LAN. The mobile phone must be connected to a 2.4GHz WIFI
network.
FAQ
How do I add a Zigbee device connected to the gateway?
To add a Zigbee device that is connected to the gateway, follow
these steps:
- Similar to adding WiFi devices, go to the gateway page and add
the Zigbee device.
What platforms does the Zigbee 3.0 Temperature & Humidity
Sensor support?
The sensor supports direct connection to various platforms
including:
- ZigBee 3.0 multi-control DIY intelligent temperature and
humidity systems. - SmartLife ZigBee gateway.
- eWeLink ZigBee Bridge.
- Philips Hue, Hubitat, Amazon Alexa with ZigBee Hubs, and
more.
“`
40*55mm, 105g 4
Zigbee Temperature & Humidity Sensor
user manual
·Plead thls manuaI cauly before use and keep lt safe for futumfemnce. Hem s howZigbee dlces omect to a netwo When paired with a de,the oetwock shocld be moved to 2.4G ,oot5G . DeCces pale aording to yourzigbee 3. 0gatvay
4. o add a Zigbee device that is connted to the gatew’, go to the gateway page acdp Add subd he mmammg steps to add the Zigbee dlce am the same as adding WiFi dlces
The Zigbee 3.o temperum and humidity sensor supports di”‘ctcon, tothefollow;agplotfo=oc
1 ZigBee 30 mu|tiontroI DIY inteIIgent tempeU and humidlty 2. Scpports dinnectlOn to the smart1lfe ZigBee gatew 3.Support dit connection Into the eWeLink ZlgBee Bndge`
4. Support dimctnntion to PhilipsHubitatZigBee mteIhgentgato
5 Suppodct comectlon to AmanAmawith ZigBee Hubsmaspeake
8. Suppodimctomocto the matte, g 7 Supportdlmct connectbn toeZigBopen soce p1atform HomeASSlStantZigbee 2MQ asmota; Such asZlgBee gateway
Specifications
Inputltage; DC3V Low powe codec ltage; <2.4 V Zigbee:2405-2480MHz
MagnetcontroldlStan5mm Workmgmperatum: 10~50 Workmghumdity:max95%RH FCC ID ;2BLF8-TH02 Model,TH02
`· ··.`’··· .,.-· ‘- I
-·
3Q.5″C
lLl
44.8 %
29, 47,
-. -. -.
eWehnk
Smarthfe/matr
5. he Iestmion of the app supports automatic dlSCO”ofnearbyZigbeed~S,aIInng you to add mclpie dlces to the gaay0e.
HO
1P b C
wt
s ot
kh
t
h e
t
e h
u se r unt” g
e nn m s e t h
w a e a o 2i k u t t h e
do e
2. Pot thette” Into the battery bin and place it according to the graphics in the battery bin. After two battenes am Ioaded. the mdlCor hghare a|waon and then off.
TROUBLE SHOOTING
Q: HotosetindicatoIghtasrapidflashing? 1.Poweron dlce. Poweroffafter5sathen poweron. 2.Holdceset button for5s. 3.Coormlcator hght lSrapld|yflashmg.
Q: Howtosetindicatodightas s|owflashing? 1Poweron dce. Proffafter5sathen poweron. 2Ho|d the resetbutton f or5s. 3.Corm indicator 1ightis now rapid|yflashing 4.RehoId reset batton for5s untII indicoc light Is slowly flashing
NOTED; he oew added dneeds 1minto connectto WiFiand IntemeLifit staysofllefor a Iong time,pase fled the p«>Sem th«>cgh the LED status.
How to add Zigbee devices
1. You must add a geway before adding Zigbee dlces. o add a gateway,tapAdd Devlce oneHome page. o, the page that appear.a,tap GetayContOl in the left-side oaCoatloo paoe aod select a gateway. 2. Power on e gateway and ua oetwock cable to connect lt to a muter. 3. Make'”ce th your moblle phone and the gateway are under the same LAN. he moblle phone must be concted to a 2.4GH, WIFI oetwo
Documents / Resources
 |
Zigbee TH02 Temperature and Humidity Sensor [pdf] User Manual TH02, TH02 Temperature and Humidity Sensor, Temperature and Humidity Sensor, Humidity Sensor, Sensor |