WAVELINE WLM-2011A Panel Step and Repeat Display
Specifications
- Product: Waveline 2011A Straight Header
- Model Number: WLM-2011A
- Parts:
- Bag Straight Poles: 14 x WLM#16
- Corner Poles: 2 x WLM#09, 2 x WLM#16, 1 x WLM#34, 2 x WLM#25
- Support Clips: 2 x WLM#09
- Graphic: 1 x WLM#16
- Display Construction: Aluminum frame
- Graphic Material & Finishing: Dye sublimated on One Planet, 100% recycled fabric. Top grade YKK zippers along bottom of display.
- Bottles Recycled: 26
Product Usage Instructions
Assembly
- Lay out parts according to the assembly diagram.
- Push the pipes together to form the frame.
Attaching Graphic
- Feed the fabric from the top of the frame, only a few feet at a time.
- Close the zipper along the bottom of the display.
Header Attachment
Attach the header using the clips provided to the display banner.
PARTS
DIMENSIONS
WLM-2011A | |
QTY | PART NUMBER |
2 | WLM#09 |
2 | WLM#16 |
1 | WLM#34 |
2 | WLM#25 |
Usage Instructions
- Lay out parts according to the assembly diagram and push the pipes together.
- Feed the fabric from the 3 top of the frame, only a few feet at a time. Close the zipper.
- Attach the header using the clips to the display banner.
DISPLAY CONSTRUCTION
- Aluminum frame
GRAPHIC MATERIAL & FINISHING | |
Dye sublimated on One Planet, 100% recycled, fabric. Top grade YKK zippers along bottom of display. | Bottles recycled
26 |
DIMENSIONS | |
Assembled Unit | 113”w x 14“h |
Graphic Size | 113”w x 14”h |
Shipping Box | 36”w x 14”h x 14”d, 8 lbs |
SAFETY INSTRUCTIONS
- Read All Instructions Before Setup
Carefully read the included manual and follow all assembly steps to prevent damage or injury. - Handle With Care
Panels and frames can be damaged by excessive force. Always handle components gently during transport and assembly. - Use on a Flat, Stable Surface
Ensure the display is set up on a level, stable surface to prevent tipping or instability. - Secure All Connections
Double-check all connectors, clips, and support bars are locked in place before the display is used. - Avoid Windy or Wet Conditions
This display is designed for indoor use. Do not use it outdoors in windy or wet conditions without proper anchoring or weather protection. - Do Not Climb or Hang Items
Never climb, lean on, or hang heavy objects on the frame or fabric panels, as this may cause the structure to collapse. - Keep Away from Heat Sources
Avoid placing the display near heaters, open flames, or other heat sources that may damage the fabric or frame. - Store Properly
Disassemble and store the display in its original case or a protective bag when not in use to prevent wear and damage. - Adult Assembly Recommended
To avoid injury or incorrect setup, have at least one adult assist in assembling the frame and graphic panels. - Inspect Before Use
Before each use, inspect the frame and fabric for any signs of wear, bending, or damage. Do not use if parts are compromised.
LIMITED WARRANTY
- Frame : Lifetime
- Graphics : 30 days
FAQs
What is the warranty coverage for the frame and graphics?
The frame comes with a lifetime warranty, while the graphics are covered for 30 days.
What material is the graphic made of?
The graphic is dye sublimated on One Planet, a 100% recycled fabric.
Documents / Resources
![]() |
WAVELINE WLM-2011A Panel Step and Repeat Display [pdf] Installation Guide 2011A, WLM-2011A, WLM-2011A Panel Step and Repeat Display, WLM-2011A, Panel Step and Repeat Display, and Repeat Display, Repeat Display |