CB15V One Gallon Variable Speed Blender
One Gallon Variable Speed Blender
CB15V
Blender Unit Components
CB15V 
| Catalog# | Model |
| CB15V… (after 9/27/2016) Convert Back to CB15V |
CB15VG ………..CB15V …..CB15VS (after 10/7/2010) |
| Illustration# | Part# | Description |
| 1 | 24000 | Hot Blending Outer Lid |
| 2 | 26496 | Hot Blending Outer Lid Gasket |
| 3 | 23998 | Hot Blending Baffle Cup |
| 4 | 2972 | Cap Nut |
| 5 | 27581 | Flat Washer (2 required) |
| 6 | 27683 | Blade |
| 7 | 18389 | O Ring |
| 8 | 27582 | Bearing Cap |
| 9 | 18390 | Small “V” Ring |
| 10 | 23934 | Bearing Holder |
| 11 | 4946 | Washer |
| 12 | 18386 | Bearing (2 required) |
| 13 | 23926 | Spacer |
| 14 | 23907 | Spring Washer |
| 15 | 23927 | Retaining Ring |
| 16 | 23906 | Large “V” Ring |
| 17 | 23933 | Drive Shaft |
| 18 | 25817 | Key |
| 19 | 28530 | Cover Insert |
| 20 | 28226 | Outer Lid |
| 21 | 8791 | Latch Wire (3 required) |
| 22 | 502773 | Bracket Assembly (spot welded to container 3 required) |
| 23 | 23909 | Double Handle Container |
| 24 | 502977 | Blending Assembly |
| 25 | 4949 | Container Support Gasket |
| 26 | 25571 | Container Support |
| 27 | 12008 | Lock Nut |
| 28 | 503328 | Coupling |
| 29 | 25871 | Jar Pad |
| 30 | 28025 | Top Housing (changed after 9/17/2010) |
| 31 | 503527 503527 030201 |
Control Panel Assembly Relabled (on units after 3/3/2022) Control Panel Assembly Relabled (on units after 5/25/2018) Control Panel Assembly |
| 32 | 29888 | Control Panel Rear |
| 33 | 26497 | Screw (4 required) |
| 34 | 30453 | Control Panel Baffle (on units after 9/27/2016) |
| 35 | 002984 003344 002984 |
Washer (4 required on units after 9/27/2016) Washer (4 required on units after 2/25/2016) Washer (4 required) |
| 36 | 016691 019098 016691 |
Hex Bolt (4 required on units after 9/27/2016) Screw (4 required on units after 2/25/2016) Blot (4 required) |
| 37 | 035520 029875 503472 029875 503323 029875 |
Leili Motor (changed after 11/8/2017) ECM Motor with MTP & Sensor (on units after 9/27/2016) Groscopp Motor Modified (on units after 2/25/2016 use 036445) ECM Motor with MTP & Sensor (on units after 8/8/2013) Motor with Sensor (on units after 9/12/2012) ECM Motor with MTP & No Sensor |
| 38 | 026318 035355 026318 |
Baffle (on units after 9/27/2016) Baffle (on units after 2/25/2016) Baffle |
| 39 | 18791 | Screen |
| 40 | 26500 | Screw (6 required) |
| 41 | 013731 013731 |
Cable Tie (2 required on units after 3/14/2013) Cable Tie (5 required) |
| 42 | 18811 | Strain Relief |
| 43 | 503329 | Cord Set |
| 44 | 2943 | Ground Washer |
| 45 | 27278 | Ground Screw |
| 46 | 26317 | Bottom Housing |
| 47 | 2984 | Washer (4 required) |
| 48 | 26412 | Screw (4 required) |
| 49 | 26296 | Foot (4 required) |
| 50 | 18314 | Washer (4 required) |
| 51 | 26493 | Screw (4 required) |
Groschopp Motor Parts No Longer Used
(on units after 2/25/2016 thru 9/27/2016)
314 Ella T. Grasso Ave.
Torrington, CT 06790
Tele. 1-800-269-6640
Fax 860-496-9017
www.waringcommercialproducts.com
Documents / Resources
 |
WARING CB15V One Gallon Variable Speed Blender [pdf] Instructions CB15V One Gallon Variable Speed Blender, CB15V, One Gallon Variable Speed Blender, Gallon Variable Speed Blender, Variable Speed Blender, Speed Blender, Blender |