verizon Ideate Advanced Robotics Project User Manual

Verizon Innovative Learning Lab Program 

Name: ___________________________ Date: _______________ Class Period: _______________

Instructions: Complete each step below to create rough sketches of your three favorite ideas, then choose your top idea and sketch a plan for your prototype and pseudocode for your programming challenge.

1. Review: What was your problem statement?
   Write your problem statement from Lesson 2 below. It should be in the form of “I need to create a __________ using RVR so that ________________ can _______________,
2. What solutions did you ideate?
   In the space below, answer these two questions:
   a. What were your three winning ideas from your brainstorming session in this lesson?
   b. How does each idea solve your user’s problem?
3. Sketch your ideas!
   Draw a rough sketch of each idea below. (You can also draw your ideas on a separate piece of paper and upload a photo of your drawings).
   For each sketch, consider the following:
   • What is the goal of your design?
   • Does your design use at least two inputs and two outputs?
   • What is the attachment for your RVR?
   • Will you use the Micro: bit, the littleBits or both?
   • How does your robot solve your user’s problem?
4. Let’s Look at an example of a prototype plan, programming challenge and pseudocode
   In step 5, you will choose your favorite design and sketch out a plan for your RVR. Your prototype plan should include the following information:
   • A picture of your RVR
   • Label the Micro:bit and the littleBits that you are using
   • Label the 3D printed or upcycled attachment that you are creating
   • Add any other details that you think will help someone understand your design
   • If you are designing a ‘challenge map’ sketch and include this as well as your pseudocode
     
     
     Programming Challenge and Pseudocode Sketch Example:
5. Create your own prototype plan and pseudocode/programming challenge sketch.
   Use the space below to sketch your own prototype plan! You may choose to sketch your plan on a piece of paper and upload a photo instead. Remember, your prototype plan should include the following information:
   • A sketch of your RVR
   • Label the Micro:bit and the littleBits that you are using
   • Label the 3D printed or upcycled attachment that you are creating
   • Add any other details that you think will help someone understand your design
   • If you are designing a ‘challenge map’ sketch and include this as well as your pseudocode

Documents / Resources

verizon Ideate Advanced Robotics Project [pdf] User Manual Ideate Advanced Robotics Project, Ideate, Advanced Robotics Project, Robotics Project, Project

References

• User Manual