UNV Displays MW35XX-U-C Smart Interactive Display
Specifications
- Manufacturer: Zhejiang Uniview Technologies Co., Ltd.
- Model: Smart Interactive Display
- Manual Version: V1.01
Product Information
The Smart Interactive Display by Uniview is a cutting-edge interactive display system designed for various applications. It offers advanced features and functionalities to enhance user experience and productivity.
Disclaimer and Safety Warnings
Before operating the Smart Interactive Display, please ensure you have read and understood the disclaimer and safety warnings provided in the user manual. It is essential to comply with all safety guidelines to prevent any potential risks or damages.
Network Security
Enhance network security by changing the default password to a strong password. This is crucial to protect your device from unauthorized access and potential security threats.
Installation and Maintenance
The Smart Interactive Display should be installed, serviced, and maintained by trained professionals with the necessary expertise. Follow the installation guidelines provided in the manual to ensure proper setup and operation of the device.
Storage and Environment
Store and use the Smart Interactive Display in an environment that meets the specified environmental requirements. Proper storage and usage conditions are essential for the longevity and performance of the device.
FAQs
Q: How can I change the default password on the Smart Interactive Display?
A: To change the default password, access the settings menu on the display interface and navigate to the security settings. Follow the prompts to create a strong and secure password for enhanced protection.
“`
Disclaimer and Safety Warnings
Copyright Statement
©2023-2024 Zhejiang Uniview Technologies Co., Ltd. All rights reserved. No part of this manual may be copied, reproduced, translated or distributed in any form or by any means without prior consent in writing from Zhejiang Uniview Technologies Co., Ltd (referred to as Uniview or us hereafter). The product described in this manual may contain proprietary software owned by Uniview and its possible licensors. Unless permitted by Uniview and its licensors, no one is allowed to copy, distribute, modify, abstract, decompile, disassemble, decrypt, reverse engineer, rent, transfer, or sublicense the software in any form or by any means.
Trademark Acknowledgements
are trademarks or registered trademarks of Uniview. All other trademarks, products, services and companies in this manual or the product described in this manual are the property of their respective owners.
Export Compliance Statement
Uniview complies with applicable export control laws and regulations worldwide, including that of the People’s Republic of China and the United States, and abides by relevant regulations relating to the export, re-export and transfer of hardware, software and technology. Regarding the product described in this manual, Uniview asks you to fully understand and strictly abide by the applicable export laws and regulations worldwide.
Privacy Protection Reminder
Uniview complies with appropriate privacy protection laws and is committed to protecting user privacy. You may want to read our full privacy policy at our website and get to know the ways we process your personal information. Please be aware, using the product described in this manual may involve the collection of personal information such as face, fingerprint, license plate number, email, phone number, GPS. Please abide by your local laws and regulations while using the product.
About This Manual This manual is intended for multiple product models, and the photos, illustrations, descriptions, etc, in this
manual may be different from the actual appearances, functions, features, etc, of the product. This manual is intended for multiple software versions, and the illustrations and descriptions in this manual
may be different from the actual GUI and functions of the software. Despite our best efforts, technical or typographical errors may exist in this manual. Uniview cannot be held
responsible for any such errors and reserves the right to change the manual without prior notice. Users are fully responsible for the damages and losses that arise due to improper operation. Uniview reserves the right to change any information in this manual without any prior notice or indication.
Due to such reasons as product version upgrade or regulatory requirement of relevant regions, this manual will be periodically updated.
Disclaimer of Liability To the extent allowed by applicable law, in no event will Uniview be liable for any special, incidental, indirect,
consequential damages, nor for any loss of profits, data, and documents. The product described in this manual is provided on an “as is” basis. Unless required by applicable law, this
manual is only for informational purpose, and all statements, information, and recommendations in this manual are presented without warranty of any kind, expressed or implied, including, but not limited to, merchantability, satisfaction with quality, fitness for a particular purpose, and noninfringement.
Users must assume total responsibility and all risks for connecting the product to the Internet, including, but not limited to, network attack, hacking, and virus. Uniview strongly recommends that users take all necessary measures to enhance the protection of network, device, data and personal information. Uniview disclaims any liability related thereto but will readily provide necessary security related support. To the extent not prohibited by applicable law, in no event will Uniview and its employees, licensors, subsidiary, affiliates be liable for results arising out of using or inability to use the product or service, including, not limited to, loss of profits and any other commercial damages or losses, loss of data, procurement of substitute goods or services; property damage, personal injury, business interruption, loss of business information, or any special, direct, indirect, incidental, consequential, pecuniary, coverage, exemplary, subsidiary losses, however caused and on any theory of liability, whether in contract, strict liability or tort (including negligence or otherwise) in any way out of the use of the product, even if Uniview has been advised of the possibility of such damages (other than as may be required by applicable law in cases involving personal injury, incidental or subsidiary damage). To the extent allowed by applicable law, in no event shall Uniview’s total liability to you for all damages for the product described in this manual (other than as may be required by applicable law in cases involving personal injury) exceed the amount of money that you
have paid for the product.
Network Security
Please take all necessary measures to enhance network security for your device.
i
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Public
The following are necessary measures for the network security of your device: Change default password and set strong password: You are strongly recommended to change the
default password after your first login and set a strong password of at least nine characters including all three elements: digits, letters and special characters. Keep firmware up to date: It is recommended that your device is always upgraded to the latest version for the latest functions and better security. Visit Uniview’s official website or contact your local dealer for the latest firmware.
The following are recommendations for enhancing network security of your device: Change password regularly: Change your device password on a regular basis and keep the password safe. Make sure only the authorized user can log in to the device. Enable HTTPS/SSL: Use SSL certificate to encrypt HTTP communications and ensure data security. Enable IP address filtering: Allow access only from the specified IP addresses. Minimum port mapping: Configure your router or firewall to open a minimum set of ports to the WAN and keep only the necessary port mappings. Never set the device as the DMZ host or configure a full cone NAT. Disable the automatic login and save password features: If multiple users have access to your computer, it is recommended that you disable these features to prevent unauthorized access. Choose username and password discretely: Avoid using the username and password of your social media, bank, email account, etc, as the username and password of your device, in case your social media, bank and email account information is leaked. Restrict user permissions: If more than one user needs access to your system, make sure each user is granted only the necessary permissions. Disable UPnP: When UPnP is enabled, the router will automatically map internal ports, and the system will automatically forward port data, which results in the risks of data leakage. Therefore, it is recommended to disable UPnP if HTTP and TCP port mapping have been enabled manually on your router. SNMP: Disable SNMP if you do not use it. If you do use it, then SNMPv3 is recommended. Multicast: Multicast is intended to transmit video to multiple devices. If you do not use this function, it is recommended you disable multicast on your network. Check logs: Check your device logs regularly to detect unauthorized access or abnormal operations. Physical protection: Keep the device in a locked room or cabinet to prevent unauthorized physical access. Isolate video surveillance network: Isolating your video surveillance network with other service networks helps prevent unauthorized access to devices in your security system from other service networks. Learn More You may also obtain security information under Security Response Center at Uniview’s official website.
Safety Warnings
The device must be installed, serviced and maintained by a trained professional with necessary safety knowledge and skills. Before you start using the device, please read through this guide carefully and make sure all applicable requirements are met to avoid danger and loss of property. Storage, Transportation, and Use Store or use the device in a proper environment that meets environmental requirements, including and not
limited to, temperature, humidity, dust, corrosive gases, electromagnetic radiation, etc. Make sure the device is securely installed or placed on a flat surface to prevent falling. Unless otherwise specified, do not stack devices. Ensure good ventilation in the operating environment. Do not cover the vents on the device. Allow adequate
space for ventilation. Protect the device from liquid of any kind. Make sure the power supply provides a stable voltage that meets the power requirements of the device.
Make sure the power supply’s output power exceeds the total maximum power of all the connected devices. Verify that the device is properly installed before connecting it to power. Do not remove the seal from the device body without consulting Uniview first. Do not attempt to service the
product yourself. Contact a trained professional for maintenance. Always disconnect the device from power before attempting to move the device. Take proper waterproof measures in accordance with requirements before using the device outdoors. Power Requirements Install and use the device in strict accordance with your local electrical safety regulations. Use a UL certified power supply that meets LPS requirements if an adapter is used. Use the recommended cordset (power cord) in accordance with the specified ratings. Only use the power adapter supplied with your device. Use a mains socket outlet with a protective earthing (grounding) connection. Ground your device properly if the device is intended to be grounded.
ii
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Contents
Public
1 Introduction ··············································································································1 2 System····················································································································1
2.1 Home Screen ······································································································· 1 2.2 App Management·································································································· 2 2.3 Tools ·················································································································· 3 3 Apps·······················································································································9 3.1 Settings ·············································································································· 9
3.1.1 General ······································································································ 9 3.1.2 Network···································································································· 11 3.1.3 Bluetooth ·································································································· 13 3.1.4 Display····································································································· 13 3.1.5 Sound ······································································································ 14 3.1.6 Scheduled Power On/Off·············································································· 14 3.1.7 Storage & Apps·························································································· 15 3.1.8 Date & Language ······················································································· 15 3.1.9 Reset······································································································· 16 3.1.10 About ····································································································· 17 3.2 Whiteboard ········································································································ 18 3.3 Screen Sharing··································································································· 22 3.4 Welcome··········································································································· 23 3.5 File Transfer ······································································································ 24 3.6 System Upgrade ································································································· 25 3.7 File Manager ······································································································ 27
iii
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Public
1 Introduction
Smart interactive display (hereinafter referred to as “display”), designed for digital office, adopts an UHD anti-glare screen and integrates multiple functions such as smart writing and screen sharing, providing an efficient and smart meeting environment and realizing smart office throughout workflow. This manual describes how to use the display.
2 System
2.1 Home Screen
The display shows the home screen by default after startup.
Icon
Pin Code
Description
View the current network status.
Tools such as annotation, volume and brightness adjustment. See Tools for details.
Used to share screen on your phone to the display. See Screen Sharing for details. Frequently-used apps. See Home App Management for customizing frequently-used apps. View the current screen location. Tap to hide the navigation bar. You may swipe up from the bottom edge of the screen to open the navigation bar, and swipe down to hide it.
1
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Public
Icon
Description
View operation guides, FAQs, etc.
Return to the previous screen.
Return to the home screen.
View running apps and switch between them. See Running Apps for details.
Switch input sources, including OPS, HDMI, etc. Tap source.
to edit the name of signal
Set up the display. See Settings for details.
Screen off/reboot/shutdown. The display will automatically shut down if there is no operation within 15 seconds.
2.2 App Management
1. Running Apps
Tap in the navigation bar. Swipe right or left to view all running apps. Tap an app to switch to it.
Tap or swipe up an app to close it. Tap Clear all to close all running apps.
2
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Public
2. Home App Management
Swipe left on the home screen, then swipe up or down to view all apps installed on the display, or tap HOME APP MANAGEMENT to manage the frequently-used apps displayed on the home screen.
Item
Description
Home Apps
Screen View frequently-used apps displayed on the home screen. Up to 3 apps are allowed. To delete an app from the home screen, tap .
All Apps
Swipe right or left to show all apps installed on the display. To add an app to the home screen, tap .
3. Install/Uninstall Apps Install apps: Get the app you want to use from the Play Store, browser or USB drive, and then
install it. Uninstall apps: On the app screen, touch and hold on the app you want to delete, and then tap
.
2.3 Tools
Tap
on the left or right side of the screen to open the Tools menu.
3
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Public
1. Annotation Make annotations on the current screen.
Item
Description
Hide the annotation bar on the left or right side. Tap the floating window to open the bar. Write or draw on the screen. Erase annotations as desired.
4
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Item
Description
Clear all annotations.
Public
Save annotations to File Manager as a local file.
Share annotations via a QR code, and others can view the annotations by scanning the QR code. Exit annotation mode.
Insert to whiteboard. Tap
to convert the current screen and annotations into an image, and
insert the image to the whiteboard.
2. Camera
Tap
in the Tools menu to take photos or videos with the built-in camera or an external camera
module.
Item
Description
Snapshot. Tap to take a photo, and the photo will be saved to File Manager as a local file. Recording. Tap to start recording and tap again to stop. The recording will be saved to File Manager as a local file. Mirroring. Tap to show the mirror image.
Switch. Tap to switch a camera.
5
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Public
For some displays, the camera mode can be set to Smooth priority or Resolution priority in Settings > General > Camera switch, so as to show different camera screens and shooting effects. Smooth priority (default): Show the smooth image, but the resolution cannot be changed. The
screen effect is shown above. Resolution priority: Show the clear image and allow to change the resolution. The screen effect
is shown below
Item
photo video
Description
Snapshot. Tap to take a photo, and the photo will be saved to File Manager as a local file.
Recording. Tap to start recording, and tap to File Manager as a local file.
Album. View photos and videos taken.
to stop recording. The recording will be saved
Switch. Switch to the other USB camera.
Mirroring. Flip the captured image horizontally (swap left and right).
Resolution. Change the image resolution.
6
Zhejiang Uniview Technologies Co., Ltd.
3. Timer Timer
Smart Interactive Display User Manual
Public
Item
Description
Swipe up or down to set a time. Start countdown.
Chronometer
Item
Description
Reset time.
Tap to enter full screen mode and tap any area to exit full screen mode.
Item
Description
Start stopwatch. Stop stopwatch.
Item
Description
Count. Reset time.
Dater Tap Click to add day counting event to set a date to start countdown.
4. Screen Lock Enable screen lock in Settings > General > Lock screen password, set the password and then
tap in the Tools menu to lock the screen. To unlock, enter the correct password.
7
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Public
5. Screenshot Take a screenshot of the displayed content.
Partial screenshot (default): Drag the four corners screenshot area.
of the screenshot box to adjust the
Full screenshot: Tap mode.
to enter full screenshot mode. Tap to switch to partial screenshot
Tap to complete the screenshot and save it to File Manager as a local file. Tap to cancel
the screenshot. Tap to insert the screenshot to the whiteboard.
6. Screen Recording Record the screen.
Item
Description
Start recording.
Item
Stop and save as a local file in File Manager.
Description
Pause recording.
7. Touch Sensing When Touch Sensing is enabled, you can tap on the screen to dim it, and the brightness restores automatically in 3s if you have no operation.
8
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Public
8. Eye Protection Eye protection mode automatically adjusts the color tone of the screen to protect your eyes. 9. File Transfer Upload images or files to the display by scanning a QR code. See File Transfer for details. 10. Volume & Brightness Adjustment
Auto adjustment: Tap , and then the brightness will be automatically adjusted based on the light intensity of the surrounding environment.
Manual adjustment: Adjust the volume or brightness by dragging the slider.
3 Apps
3.1 Settings
Tap in the navigation bar or general settings, network, etc.
3.1.1 General
on the HOME APP MANAGEMENT screen to configure
9
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Public
Item
Power on channel OPS boot
Boot mode USB camera
Description
Set the power-on channel, including Android, OPS, etc. The corresponding screen will be displayed after startup.
Open with any channel: OPS module is automatically powered on for any input source.
Open with OPS: OPS module is automatically powered on for OPS input only.
NOTE!
After the OPS module is powered on, if you switch the signal source of the device to OPS, the device will instantly enter the corresponding screen.
Select how to start up the display after power-on. Power on and power on (default): To start up the display, turn the power switch
on. Power on standby: To start up the display, turn the power switch on and press the
power button. Power on memory:
If you shut down the display by turning the power switch off, then next time you just need to turn the power switch on to start up the display.
If you shut down the display by tapping Power on the screen or press the power button, then next time you need to turn the power switch on and press the power button to start up the display.
Select the camera used.
Lock screen password Set the screen lock password, allows numeric and gesture passwords. Then, tap in the Tools menu to lock the screen.
Smart configuration
module
When the Uniview camera module is connected to the display, the camera mode can be set and it will take effect in all apps that use the camera module.
AI mode: Auto framing: Automatically identify everyone in the screen and zoom in them on the center. Speaker tracking: Automatically identify the person who is talking in the screen and display his/her close-up. Multi-window close-up: Automatically identify everyone in the screen and display their close-up images individually in the split screens.
Camera Style: Set the image style. HDR: High dynamic range imaging, used to improve the image brightness and
contract ratio to deliver more image details.
Note:
AI mode is only available to the AI camera module.
This function is only available to certain models.
Smart module upgrade
When the Uniview camera module is connected to the display, the system will automatically detect the firmware version of the module and upgrade it. Note:
Do not plug and unplug the module or turn off the display during upgrade. This function is only available to certain models.
No operation standby If there is no operation after the set time, the display will be in the standby mode.
HDMI OUT
Set the display resolution of image output from the HDMI interface. If it is set to Auto, the resolution of the display is adaptive.
Suspended window
When enabled, the suspended window will be displayed on the screen and you can manage the frequently-used apps displayed in the suspended window.
Side navigation bar
When enabled, the side navigation bar will be displayed on the left and right sides of the screen, and you can swipe up and down to adjust its position.
10
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Public
Item
Centralized control Intelligent recognition Source wakeup USB access control
Camera switch
Description
When enabled, you can control the device via the serial port.
When enabled, if other sources are connected, the display will automatically show the corresponding screen.
When enabled, if another signal source is connected to the display in the standby state, the device will automatically wake up.
When enabled, access to the USB interface will be controlled.
Switch the camera mode to show different Camera screens and shooting effects. See Camera for details. Smooth priority (default): Show the smooth image, but the resolution cannot be
changed. Resolution priority: Show the clear image and allow to change the resolution. Note: This function is only available to certain models.
3.1.2 Network
1. Wireless Network Enable WIFI to discover available wireless networks automatically, then select a network and enter
its password to connect to it. After successful connection, you can tap to view and configure the network. The list automatically refreshes available wireless networks. If the wireless network you want to use does not appear in the network list, tap Add network to add it manually.
2. Wired Network Connect the display to a wired network using a network cable. Select Automatically obtain an IP address, and you can automatically obtain the IP address, gateway, subnet mask, and other
11
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Public
parameters. If you select Manually set the IP address, and then you can set the parameters manually.
3. Hotspot
Enable Wi-Fi hotspot to share the display’s Internet connection with other devices for wireless screen sharing. See Screen Sharing for details.
Item
Hotspot name Security Password Broadcast channel
Description
View or edit the hotspot name. Other devices can discover the hotspot using the name.
None: The hotspot is accessible without a password. WPA2-Personal: The hotspot is accessible with a password.
Set the password according to the on-screen prompt.
Set the frequency band of the hotspot. Switching to 2.4 GHz helps other devices discover the hotspot but may slow down the connection speed, which is opposite to 5.0 GHz.
12
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
4. Network Status View the network status and IP address of the display.
Public
3.1.3 Bluetooth
Enable Bluetooth, and tap Pair new device to discover available Bluetooth devices automatically, and then select a device to connect to it. The list automatically refreshes available Bluetooth devices. If the Bluetooth device you want to use does not appear in the device list, you can manually pair the Bluetooth device with the display.
3.1.4 Display
1. Wallpaper
Set the wallpaper. You can use an existing image in the system or tap File Manager as the wallpaper.
to import an image from
13
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Public
2. Color Temperature Set the color temperature of the screen.
3.1.5 Sound
Item
Description
System sound
Turn on/off device sound.
Surround stereo
Digital audio output format
Turn on/off surround stereo.
PCM: The audio is output to the amplifier via PCM format, and then be decoded. Auto: The device automatically selects the decoding output mode. Bypass: The audio is decoded and magnified by the amplifier.
3.1.6 Scheduled Power On/Off
Enable Power-on by Alarm or Timed shutdown, and set the time for the display to automatically turn on or off.
14
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Public
3.1.7 Storage & Apps
View app information and internal storage space of the display.
3.1.8 Date & Language
1. Date & Time Enable Automatic acquisition time, then the display can sync the date and time with the network. To manually set the date and time, disable Automatic acquisition time.
2. Language View or change the currently used language.
15
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Public
3. Keyboard View the currently used keyboard input method. You can install other input methods by downloading in the browser or obtaining installation packages from a USB flash drive. Set the input method from Manage keyboard.
3.1.9 Reset
Clear all data from the display’s internal storage and restore the device to factory settings. CAUTION! The reset operation cannot be undone.
16
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Public
3.1.10 About
View the display information, including name, version, etc. Tap Device name to edit the display name. Tap Windows System Reset to restore the OPS signal source to the default factory settings.
17
Zhejiang Uniview Technologies Co., Ltd.
3.2 Whiteboard
Smart Interactive Display User Manual
Public
Tap
to open Whiteboard. You can write or draw on the whiteboard with your fingers or the
stylus pen.
1. Canvas
2. Auxiliary tools
4. Change the location of menu and page tools
5. Writing tools
3. Menu Tools 6. Page Tools
1. Writing Tools
: Single-point writing mode. Tap to switch to multi-point writing mode.
: Multi-point writing mode. Up to 20 points are allowed. Tap
writing mode.
to switch to single-point
: Pen. Set the handwriting size, including S (small pen) and B (big pen).
18
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Public
: Eraser. Erase what you’ve written.
: Drag the eraser over the contents you want to erase.
: Circle the contents you want to erase.
Swipe to clear: Clear all contents on the current canvas.
NOTE!
In writing mode, you can drag your hand over the contents you want to erase. The erase area depends on the recognized hand size.
: Select. Circle an area and perform copy, delete and other operations on it.
: Insert images to the whiteboard.
: Insert shapes. Draw the shape with the shape tool or auxiliary tools, and then set the
size, color and border width as needed.
19
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Public
: Undo the last operation.
: Redo what you’ve undone.
2. Page Tools
: Create a new page.
/ : Previous/next page.
: Current page location/total number of pages. Tap to show the thumbnail of all pages.
Tap a thumbnail to switch to the page. To delete a page, tap .
: Delete the current page.
20
Zhejiang Uniview Technologies Co., Ltd.
3. Auxiliary Tools
Smart Interactive Display User Manual
: Exit Whiteboard.
: View the whiteboard’s version information.
: Set the whiteboard background.
Public
: Open a saved whiteboard file.
: Share whiteboard contents via a QR code, and others can view the contents by scanning
the QR code.
: Converts the current whiteboard contents into an image and sends it by email.
: Save whiteboard contents.
21
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Public
: Partition. Divide the canvas into left and right two canvas, which can be written separately.
3.3 Screen Sharing
Tap
to open Screen Sharing. The device allows screen sharing from Android, iOS and
Windows devices.
Item
Description
IP
IP address of the device or the hotspot.
MAC
MAC address of the device.
Settings
Set whether to automatically launch this app after startup.
Launch this app when startup
Set whether to automatically launch this app after startup.
Theme 2
Change the app theme.
Set screen sharing parameters by referring to description of other items.
Pin Code
Enter the pin code in the screen sharing client for screen sharing. Enable Pin Code in to show the code.
Swipe left on the Guide Section screen to the Instructions screen. Refer to the on-screen instructions to start screen sharing.
22
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Public
3.4 Welcome
Tap
or swipe right on the home screen to open Welcome. You can design the page style to
welcome visitors or show activity.
: Reset the current page to its initial state.
: Insert the custom styles.
Text: Insert a text box, and edit the content and style.
23
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Public
Image/background music/background: Open the file folder and select the file you want to insert.
: Quickly change welcome templates.
: Save the current style as a custom template.
3.5 File Transfer
Tap
to open File Transfer. Scan the QR code to transfer images or files.
1. Scan the QR code.
24
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Public
2. Select the image or file you want to transfer. The selected image or file will be displayed on the display synchronously.
3. After the transfer is complete, you can perform save, open, and delete operations on the image or file.
4. To close the app, tap . All the received images and files will be cleared after you close it.
3.6 System Upgrade
Tap
to open System Upgrade. The upgrade can be done automatically or manually.
25
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Public
1. Auto Upgrade Tap CHECK NOW to see whether a new version is available. If there is no new version, you will be prompted that the system is up to date. If a newer version is displayed, download and install it.
Tap Configure Upgrade and enable Auto Upgrade, then you can receive an update notification when a new version is available.
2. Manual Upgrade Tap Install Manually, and select the upgrade file to start upgrade.
26
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Public
3.7 File Manager
Tap
to open File Manager. This app allows management for one or more items.
Item
List/Tiles Exit New
Description
Item
Description
Search for an item by entering its keywords.
Sort
Sort the items
View items in list or tile mode.
Multiselect Select items as required.
Exit selecting.
Select all Select all items on the current page.
Create a new folder.
Paste
Paste the copied or cut item(s) to the current location.
27
Zhejiang Uniview Technologies Co., Ltd.
Smart Interactive Display User Manual
Public
Item
Copy Delete Share
Description
Copy the selected item(s). Delete the selected item(s). Share selected item(s) to other apps.
Item
Cut Rename
Description
Cut the selected item(s). Rename the selected item. Return to the previous directory.
28
Documents / Resources
 |
UNV Displays MW35XX-U-C Smart Interactive Display [pdf] User Manual MW35XX-U-C, CA X, MW35XX-U-C Smart Interactive Display, MW35XX-U-C, Smart Interactive Display, Interactive Display |