A3002RU QOS settings
It is suitable for: N100RE, N150RT, N200RE, N210RE, N300RT, N302R Plus, A3002RU
Application introduction: Solution about how to configure QoS on TOTOLINK products.
STEP-1:
Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.
Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.
STEP-2:
User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN.
STEP-3: IPV4 QOS setting
Please go to QoS page, and check which you have selected. Select Enable and fill in Manual Uplink/Downlink Speed, then click IPv4 bottom
You can fill in IP Address and Total Uplink Bandwidth and Total Downlink Bandwidth you want to restrain, then Click Apply.
STEP-4: IPV6 QOS setting
Please go to QoS page, and check which you have selected. Select Enable and fill in Manual Uplink/Downlink Speed, then click IPv6 bottom
You can fill in IP Address and Total Uplink Bandwidth and Total Downlink Bandwidth you want to restrain, then Click Apply.
DOWNLOAD
A3002RU QOS settings – [Download PDF]
