TAKSTAR ECA-032 Line Array Full Range Speaker Cabinet
Product Information
- The ECA-032 line array full-range speaker cabinet is designed to be used with the ECA-081SUB subwoofer.
- It features a compact contour, easy installation and adjustment, and delivers clear and delicate sound quality.
- Please read the user manual carefully before operation and keep it for reference in the future.
- Refer to Figures 1 and 2 in the user manual for installation instructions.
- Ideal for medium or small banquet halls, multifunction halls, and large conference rooms.
FAQ
- Q: How do I connect the ECA-032 with the ECA-081SUB subwoofer?
- A: To connect the ECA-032 with the ECA-081SUB subwoofer, use the provided cables and follow the instructions in the user manual for proper setup.
- Q: Can I use the ECA-032 without the ECA-081SUB subwoofer?
- A: While the ECA-032 is designed to be used with the ECA-081SUB subwoofer for optimal performance, it can still function as a standalone speaker cabinet.
Dear Customer,
- Thank you for purchasing ECA-032 line array full range speaker cabinet which used with ECA-081SUB subwoofer together.
- ECA-032 features compact contour, easy installation and adjustment, clear and delicate sound.
- Please read the user manual carefully before operation and keep it for reference in future.
Features
- The line array is designed with 3 inch 20mm cone MFHF and dual 25mm silk dome tweeter.
- The woofer features elastic and durable rubber surround for quick and dynamic MFLF, symmetric magnet circuit for low harmonic distortion.
- The tweeter features transparent silk diaphragm for flat and bright treble, NdFeB magnet for light weight and slender but detailed treble.
- The magnet loop is filled with magnet liquid to reduce the voice coil temperature and meanwhile boost the reliability.
- Specific directivity horn is designed together to effectively control the vertical audio projection range
- The crossover is designed with low consumption OFC inductor and high quality polypropylene for reliable performance and prominent sound
- The trapezoidal enclosure is designed with acoustic foam to eliminate standing wave but boost the pure MFLF and flat frequency response.
- The compact enclosure is connected via Al pieces, vertically 0°-10°adjustable in 6 steps. The speaker cabinet quantity and projection angle can be adjusted according to the actual installation requirement
- Linear audio source, even horizontal coverage, strong vertical directivity, low attenuation in the projection range
Specification
- Rated Power: 40W
- Rated Impedance: 16Ω
- Frequency Response(±3dB): 100Hz-20kHz
- Sensitivity(1W/1M): 92dB
- Coverage: H120°×V45°
- Max SPL: 108dB
- Crossover Mode: two way passive
- Crossover Frequency: 2500Hz
- Suspension/Installation: flying suspension, vertical 0°-10°adjustable
- Wiring: 2×NL4speakon(IN1+, 1-，LINK1+, 1-)
- Enclosure: 5mm+9mm+15mm plywood
- Finish: white painting
- Tweeter: 1″×2(25mm)，silk dome
- Woofer: 3″×2(20mm)，70 magnet
- Dimension(mm): 302×167×112mm(W×D×H)
- Net Weight: 2.4Kg
Caution
- To ensure installation safety, the full range speaker cabinet quantity can not be more than 20 on one side.
- Make sure the power and impedance of speaker cabinet match with that of the power amplifier, otherwise it leads to equipment damaged or bad sound.
- Ask professional technician for installation.
- During operation, keep the horn toward the audience for better effect.
- Handle with care during transportation.
- After operation, fix the connection bar and pin on the cabinet to prevent from losing them.
Installation
- Connect one ECA-032 with another ECA-032 via connection parts at three points. Use the pin to adjust vertical angle 0°-10° in 6 steps (refer to figure 1).
- Connect ECA-032 with the subwoofer ECA-081SUB at three points. Use the bolt to adjust vertical angle in two steps (refer to figure 2).
- Four full range speaker cabinets can be installed as a group in a parallel way via 3 cables, 4Ω impedance after connection.
It is recommended to use one channel of power amplifier EKA-3A/3D/403/403D for one group of speaker cabinets.
Application
- Medium or small banquet hall, multifunction hall, large conference room
Product Content
- ECA-032 speaker cabinet ×2
- User manual×1
CONTACT
- Guangdong Takstar Electronic Co., Ltd.
- Address: No. 2 Fu Kang YiRd., Longxi Boluo Huizhou, Guangdong 516121 China
- Tel: 86 752 6383644 Fax: 86 752 6383952 Email: sales@takstar.com Website: www.takstar.com
Documents / Resources
 |
TAKSTAR ECA-032 Line Array Full Range Speaker Cabinet [pdf] Owner's Manual ECA-081SUB, ECA-032 Line Array Full Range Speaker Cabinet, ECA-032, Line Array Full Range Speaker Cabinet, Array Full Range Speaker Cabinet, Full Range Speaker Cabinet, Range Speaker Cabinet, Speaker Cabinet, Cabinet |