SCT-USB4-FMMT USB 3.1/2.0/1.1 Fiber Extender
Specifications
- Distance: Transmitter: Non-real-time
transmission – 300m, Real-time transmission – 100m - Data rate USB Standards:
- USB3.1 Gen1: 5Gbps
- USB2.0: 480Mbps
- USB1.1: 12Mbps
- Supports Control, Interrupt, Isochronous, and Bulk
- Transmitter (SCT-USB4-FMMT):
- USB Interface: 1xUSB3.0 type-B male connector
- Fiber Interface: 1xLC
- Dimensions: 135mm x 75mm x 26mm
- Installation: 4 mounting holes for fixing
- Enclosure Material: Metal
- Power Supply: External DC 12V
- Receiver (SCT-USB4-FMMR):
- USB Interface: 4xUSB3.0 type-A female connector
- Fiber Interface: 1xLC
- Dimensions: 160mm x 85mm x 26mm
- Installation: 4 mounting holes for fixing
- Enclosure Material: Metal
- Power Supply: External DC 12V
Product Usage Instructions
Step 1: Connecting the Transmitter
- Connect the USB3.0 type-B male connector to your device.
- Connect the LC Fiber connector to the corresponding port.
- Securely mount the transmitter using the provided mounting
holes. - Connect the external DC 12V power supply to the
transmitter.
Step 2: Connecting the Receiver
- Connect your USB devices to the USB3.0 type-A female connectors
on the receiver. - Attach the LC Fiber connector to the receiver’s port.
- Mount the receiver securely using the provided mounting
holes. - Ensure the external DC 12V power supply is connected to the
receiver.
Step 3: Powering On and Testing
- Power on both the transmitter and receiver by supplying them
with DC 12V power. - Verify that the devices are properly connected and
powered. - You can now start using your USB devices over fiber extension
with this setup.
FAQ
Q: Can this extender work with all USB devices?
A: The extender supports all USB 3.1, 2.0, and 1.1 devices,
ensuring compatibility with a wide range of USB peripherals.
Q: What is the maximum distance supported by the non-real-time
transmission mode?
A: The extender can transmit data up to 300m in non-real-time
transmission mode for USB3.1 Gen1.
Q: Does the extender require any special drivers for
operation?
A: No, the extender is plug-and-play and does not require any
additional drivers for operation on Windows, Mac OS X, and Linux
systems.
Q: Can I use this extender for video conferencing
applications?
A: Yes, the extender is suitable for video conferencing
applications as it transmits audio and video signals over
single-mode fiber with strong anti-interference ability.
SCT-USB4-FMM
USB3.1/2.0/1.1 Fiber Extender
User Manual
All Rights Reserved
Version: SCT-USB4-FMM_2025V1.2
Product Introduction
The USB optical fiber extender uses optical fiber conversion technology to realize the optical fiber transmission of USB3.1/2.0/1.1 signals. When used for long-distance transmission of USB3.1 signals, the data rate can up to 5Gbps, the transmission distance can up to 100m by using OM3 multi-mode fiber. The extender adopts metal enclosure and has four mounting holes for easy installation. It has an integrated USB 3.1 hub with four ports and supports Plug-and-Play (PnP), no need to install driver is required. This product adopts advanced optical fiber transmission technology to ensure good anti-electromagnetic interference ability.
Features
Supports Windows system, Mac OS and X and Linux. Compatible with USB3.1/2.0/1.1. USB3.1 Gen1 data rate is 5Gbps. USB2.0 data rate is 480Mbps, USB1.1 data rate is 12Mbps. Integrated USB 3.1 hub with four ports, support all USB 3.1, 2.0, 1.1 devices. Transmits audio and video signal over Single-mode Fiber. 1xLC Fiber connector. Supports the technology of converting USB3.1 to optical fiber without delay. External DC 12V power supply. Strong anti-interference ability.
Application
Machine vision Security monitoring Date storage Video conference Medical equipment system
Application Diagram
Specification
Distance
Data rate USB Standards
Transmitter (SCT-USB4-FMMT)
USB3.1 Gen1 Non-real-time transmission: 300m Real-time transmission: 100m
USB3.1 GEN1: 5Gbps USB2.0: 480Mbps USB1.1: 12Mbps Control, Interrupt, Isochronous und Bulk
USB Interface: 1xUSB3.0 type-B male connector Fiber Interface: 1xLC Dimensions: 135mm x 75mm x 26mm Installation: 4 mounting holes for fixing Enclosure Material: Metal Power Supply: External DC 12V
Receiver (SCT-USB4-FMMR)
USB Interface: 4xUSB3.0 type-A female connector Fiber Interface: 1xLC Dimensions: 160mm x 85mm x 26mm Installation: 4 mounting holes for fixing Enclosure Material: Metal Power Supply: External DC 12V
Environment
Operating Temperature: -10 to +60 (+50° to +140°F) Storage Temperature: -45 to +85 (-49° to +185°F) Operating Humidity: 20% to 80% relative humidity, non-condensing Storage Humidity: 10% to 80% relative humidity
Mechanic Dimension
Transmitter (SCT-USB4-FMMT): unit: mm
Receiver (SCT-USB4-FMMR): unit: mm
Kontakt: systcomtec Distribution AG Keltenring 11 DE 82041 Oberhaching Telefon: +49 (0) 89 666 109 330 Telefax: +49 (0) 89 666 109 339 E-Mail: post@syscomtec.com Homepage: www.syscomtec.com
Documents / Resources
 |
sys com tec SCT-USB4-FMMT USB 3.1/2.0/1.1 Fiber Extender [pdf] User Manual SCT-USB4-FMMT, SCT-USB4-FMMR, SCT-USB4-FMMT USB 3.12.01.1 Fiber Extender, SCT-USB4-FMMT, USB 3.12.01.1 Fiber Extender, Fiber Extender, Extender |