Silver Monkey SMXC045 Cassette Computer Cases
Safety Information
- Avoid direct contact of the device with water and other liquids.
- Do not use the appliance in an environment with high humidity.
- Keep the device out of the reach of children. They may swallow some elements.
- Use the appliance only in accordance with the user manual.
- If the device stops working properly – contact us.
Package contents
- Case
- Manual
- Mounting kit
Included Accessories
How to use the product
Panel I/O.
REMARK! Before connecting the wires, refer to the motherboard manual. 
Disassembling the panels
- Glass panel: Bend the panel at a 15° angle, then lift them up.
- Side Panel: Using the toolless screws (A), unscrew the panel, then slide the panel.
- Front panel: Grasp the panel from underneath (B), then pull it towards you with a firm motion.
Assembling the Power Supply
- Using the screws (2), screw the power supply to the chassis. Make sure the power supply is facing the fan down the case.
Assembling the Motherboard
Remark! Before mounting, please refer to the motherboard manual.
The case supports motherboard standards: ITX, mATX, E-ATX and ATX.
To mount the motherboard, use the screws (1). Adjust the mounting pins (3) to the size of your motherboard.
Fan Installation and Connection
Three 140mm fans are pre-installed on the front of the case. You can swap them out for three 120mm fans. To remove the front fans, remove the front panel. One 140mm fan is mounted on the back of the case. You can install two 120mm/140mm fans on the top of the case. 
Removing the dust filters
At the top of the case and at the bottom you will find dust filters. The filters are mounted on magnetic strips. Gently prying them open will allow them to be dismantled.
Remark! The front dust filter is integrated into the panel. It is not possible to disassemble the filter yourself.
Mounting SSDs
Disassemble the side panel of the case. The disk frame is mounted on the bottom of the case with tool-free screws. Unscrew the bezel, and then screw the disc to the bezel. Use the screws marked with the number 1. 
Mounting HDDs.
Unscrew the disk frame. Then use the screws (4) to secure the HDD. You can install a maximum of two HDDs in the frame.
Mounting the Graphics Card.
Unscrew the rear panel grilles (A). Next, remove the caps of the PCIe expansion cards. Use the screws (2) to mount the graphics card.
You can use the factory graphics card bracket. Using screws, adjust the mounting height of the bracket. Pay close attention to ensure that the bracket does not interfere with the graphics card fan.
Remark! Remove as many PCIe port covers as your graphics card requires.
Installation of All in One water cooling recommended.
You can install an All in One water cooling system in the case. We recommend the installation of radiators of the following sizes: Front: 240 / 280 / 360 mm.
Top: 240 mm.
Remark! Before installing the water cooler, please refer to the enclosed instructions. When mounting the water cooler on the front of the case, make sure that the cooler will not interfere with the graphics card bracket.
Specification
| Side panel | Tempered Glass |
| Backlight | None |
| Motherboard Standard | Mini-ITX Micro-ATX ATX
E-ATX |
| Internal Drive Spaces | 1x 3.5”, 1x 2.5” |
| Expansion card slots | 7 |
| Maksymalna długość karty graficznej | 340 mm |
| Maximum CPU Cooler Height | 185 mm |
| Maximum number of fans | 6 |
| Fan mounting options | Front: 3x 120 mm, 3x 140 mm Top: 2x 120 mm, 2x 140 mm
Rear: 1x 120 mm, 1x 140 mm |
| Water Cooling Mounting Options | Top: 240 mm
Front: 240 mm, 280 mm, 360 mm |
| Number of Fans Installed | 4 |
| Buttons | Power
Reset |
| Connector Leads | 2x USB 3.0 socket
Audio jack |
| Colour | Black |
| Height | 436 mm |
| Width | 230 mm |
| Depth | 360 mm |
| Scales | 5,5 kg |
Warranty & Support
Your product comes with a 24-month manufacturer’s warranty. For more information, visit the www.silvermonkey.com/supportwebsite.
If you would like support on how to use the product, please contact us at kontakt@silvermonkey.com.
Producer:
- Silver Monkey sp. z o.o.
- Twarda 18 00-105 Warsaw
- Poland v. 1/14.07.2024
Environmental & Compliance
As the manufacturer of this equipment, we declare that it meets the requirements of the relevant European Union directives. If you need a copy of the declaration of conformity – please contact us.
Do not dispose of this equipment with other waste. The materials from which the equipment is made can have a bad impact on the environment and human health if the product is disposed of improperly. Hand over used equipment to an appropriate e-waste collection point.
FAQ
How do I clean the SMXC045 Cassette?
To clean the product, use a soft cloth dampened with water or a mild detergent. Avoid using harsh chemicals that may damage the surface.
Can I use the SMXC045 Cassette outdoors?
The product is designed for indoor use. Using it outdoors may expose it to conditions that could affect its performance.
Documents / Resources
 |
Silver Monkey SMXC045 Cassette Computer Cases [pdf] Instruction Manual SMXC045 Cassette Computer Cases, SMXC045, Cassette Computer Cases, Computer Cases |