Shenzhen LogoUser Manual
Bluetooth remote control
controller

CONTROLLER Bluetooth Remote Control

Shenzhen CONTROLLER Bluetooth Remote Control - App Program

Scan two-dimensional code download APP

  1. Connect LED color strip and controller, power on controller
  2. Scan two-dimensional code download APP:Shenzhen CONTROLLER Bluetooth Remote Control - QR Codhttp://www.easytrack.net.cn/download/111SHENZHENSHUANGHONGYUAN
  3. Start APP, search and connnect controller
  4. Enjoy the Bluetooth wireless control experience

Cutting & Connectors Application:

Shenzhen CONTROLLER Bluetooth Remote Control - Cutting

Safety Information

  1. FOR INDOOR USE ONLY.
  2. RISK OF ELECTRIC SHOCK.
  3. DO NOT EXPOSE TO LOUID, VAPOR OR RAIN.
  4. Keep away from open flame.
  5. Avoid overheating the light bar when power is on. Please unlock the light bar in time.
  6. Avoid rough mounting surface. Make sure the surface is clean and dry before installation.
  7. Avoid tearing back glue quickly during installation and stick it to the installation surface slowly.
  8. Avoid pressing the lamp bead on the lamp strip vigorously.
  9. Backing adhesive does not have good adhesion to all materials, so please use the buckle we deserve.
  10. Avoid the direct contact between light beads, which risks the fault of light beads caused by short-circuit.
  11. The light strip can be cut according to the required length, but if you want to reuse the extra light strip, you need to buy the connectors

Warranty Policy

30-day money-back guarantee for any reason For 30 days after the date of purchase, return your undamaged product and receive a full refund for ANY reason.
12-month warranty for quality-related issues For 12 months after the date of purchase, we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND.
Reminder: Be sure to use your product as directed.

Specifications

LEDType:SMDLED
Color:MultipleColors Selection
Strip Width:10mm
ColorRenderingIndex(CRI):Ra8+
Working Tempreture:-20°Cto 50°C
Beamangle:120 degrees
Lifespan:36,000Hrs+
Usage:Indoor useonly

Control Method

  1. 15 Steady Color
  2. Brightness Diming
  3. White Light Brightness Percentage
  4. Simulation ofsunrise sunset
  5. Timing orf/Mode
  6. MMusic Activation Mode
  7. Mutiple Color Changing Mode

Shenzhen CONTROLLER Bluetooth Remote Control - USBThe connection lamp belt is powered by the connector USB

FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference receiv ed, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for Compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, p ursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against h armful interference in a residential installation. This equipment generates uses and can radiate radio freq uency energy and, if not installed and used in accordance with the instructions, may cause harmful interfe rence to radio communications. However, there is no guarantee that interference will not occur in a partic ular installation. If this equipment does cause harmful interference to radio or television reception, which c an be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer
ence by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help important announcement.

Radiation Exposure Statement
To comply with FCC RF exposure compliance requirements, this grant is applicable to only mobile configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be coocated or operating in conjunction with any other antenna or transmitter.

Shenzhen Logo

Documents / Resources

Shenzhen CONTROLLER Bluetooth Remote Control [pdf] User Manual
2BM78-CONTROLLER, 2BM78CONTROLLER, CONTROLLER Bluetooth Remote Control, CONTROLLER, Bluetooth Remote Control, Remote Control, Control

References

Leave a comment

Your email address will not be published. Required fields are marked *