Pyle Portable PA Speaker and Microphone Kit – Bluetooth PA Speaker
Introduction
With the Pyle Portable PA Speaker System, you can stream music wirelessly over Bluetooth while getting powerful sounds. Enjoy wireless sound from all of today’s newest portable gadgets without the wires (like Smartphones, Tablets, Laptops, Computers, etc.). You can start a Karaoke party right away with the help of the accompanying handheld microphone and the system’s special microphone talk-over feature. It also works well for crowd management and public events. In-built rechargeable battery, FM radio, audio recording capability, microphone input, USB flash and micro SD memory card readers, coupled with an Aux (3.5mm) connection are additional system features that let you connect and stream audio from more external devices. With the Pyle Bluetooth PA Loudspeaker System, you can command both the audience and the sound.
Display Description
- Stop lighting when reading USB or TF card data
- U/TF: Lighting when playing in USB or TF mode.
- Single Cycle
- Shows “FM Frequent! when operating in FM mode
Shows “LINEIN” when operating in Line in mode and
Shows “Time” when operating in USB & TF mode
Shows “BT” when operating in Bluetooth mode and
Shows “— — — —”when standby.
Shows “PAUS” when stop. - Flashing when the power is low, charging is needed.
- Mic: Lighting when Microphone is plugged, it is flashing when operate in Microphone VIP function.
Specification
Packing
- PWMA825BT Speaker Adapter
- Wireless Microphone
- Aux In Cable
- Manual
Panel Function
- Mode Button
- Repeat Button
- Microphone VIP
- Skip – Button
- Play/Pause Button
- Skip + Button
- Echo Function Control Dial
- Microphone Volume Control Dial
- Microphone Port
- TF Card Slot
- USB Card Slot
- Line-In Aux. Port
- Master Volume Control Dial
- Bass Volume Control Dial
- Charging & Battery Volume Indicator Light
General Function Description
- Master Volume: Turn to adjust master volume .
- Treble Volume: Taranto adjust the treble volume.
- Echo Effect: Turn to adjust echo effect .
- Mic Volume: Turn to adjust mic volume .
- Mode: To choose another mode when operating, sequence: BT – Line in – USB – TF – FM, Priority to play in USB or TF card mode when inserting the USB or TF card
MP3 Function Description
- USB: Playing when inserting the USB which saves with MP3 music
- TF Card: Playing when inserting the TF card which saves with MP3 music
- Repeat: While playing music in USB or TF mode, press to repeat single music or all music.
- Play/Pause Button: In USB or TF mode, press to play or pause, in Line mode, press to mute.
- Skip – & + Button: While playing music in USB or TF mode, short press to go back or forward music, long press to adjust volume.
Bluetooth Function Description
- Pairing: Press the mode button to Bluetooth mode, the speaker will be under automatic pairing mode and call out ” Power on”, LED display shows “Br, pair the Bluetooth compatible device by selecting “M31” from the listed devices, the speaker will call out “Connected” after paired successful, Bluetooth pairing system will be off if there is no device connecting after 5 minutes.
- Music Playing : Press Play/Pause , Skip + / – Button to play music .
Microphone VIP Function
- Microphone VIP: While music is playing and plugged microphone, it will enlarge the voice received from the mic and lower the music volume after pressing the Microphone VIP button. The music volume will go back originally if there is a voice received from the microphone, press the Microphone VIP button again to cancel the function.
Battery Volume And Charging Indication
- Four green light shows the battery volume, starting from the left one – around 20%, second – around 40%, Third – around 80%, and All lighting – full.
- Should charging when the left one lighting only, the red lightning symbol is on when charging, it is off when the battery is full.
- Speaker is set to battery protection mode when all power indicator light is off, and the music volume will be lower to 70% automatically.
External Battery Function
- Speaker designed with external 12V battery function, it can be used after connecting the Red (+), Black (-) of the speaker to external battery 1+1, (-) correctly.
Feature
- Stylish, fashionable, and elegant appearance.
- High-performance lithium battery with long play time.
- Strong Bass, clear and rich vocal
- New Bluetooth solution, compatible with most of the market devices
- Support USB and TF card Playing, Microphone Input.
- Cool Design With Battery Volume Indicator.
Frequently Asked Questions
For the price, the sound quality is quite good. – The microphone has a wide field of view, good clarity, and little background noise. – A variety of mixable inputs. – Actually, sound is significantly (and favourably) affected by echo and bass/treble.
Despite being an inexpensive speaker, it has pretty nice quality, a built-in microphone, and great sound for a backyard gathering!
Activate the device. To turn on Wireless BT, press the ON/OFF switch on the front panel until the indicator light is on. Search for the Wireless BT name “PYLE SPEAKER” using your Wireless BT phone or another device. Choose the Wireless BT name “PYLE SPEAKER” and wait for the device to pair on its own.
Remove the battery cover from the microphone’s end, insert a 9V battery with the proper polarities, and then screw the cover back on. When you flip the “ON/OFF” switch to the “ON” position, the “PWR” indicator will briefly light up before turning off. This denotes proper performance.
Hi, that will depend on the setting. The battery will last 3 to 4 hours in mid-volume. For more info, kindly visit our website pyleaudio.com. Type the model number on the search box PWMA825BT.
STRONG AND PORTABLE: This Pyle 1600 Watt Compact High Powered Karaoke PA Sound System is equipped with a 15″ Subwoofer and a 1.34″ Tweeter for Full Range Stereo Sound Reproduction. Its handles and wheels make transportation simple.
