PIPELINE MS7693 Game Card Vending Machine

Specifications

• Mainboard: CV-DBA
• Screen: CV-Display
• Hand Held Programmer: CV-Hand Held Programmer
• Card Dispenser: CV-Card Dispenser
• Power Cord: CV-Power Cord
• Front Overlay: CV-Front Overlay
• Entry/Exit Card Plate: CV-Entry/Exit Card Plate
• Wheels: CV-Wheels
• T Handle Lock/Key: CV-T Handle Lock/Key
• Back Door Lock/Key: CV-Back Door Lock/Key
• Power Supply: CV-Power Supply
• Meter: CV-Meter
• Left/Right Graphics: Left/Right Graphics
• Front Acrylic: CV-Front Acrylic
• On/Off Assembly: CV-On/Off Assembly
• Outlet: CV-Outlet
• Button: CV-Button

Product Usage Instructions

How to Use:

1. Insert a coin or bill into the machine.
2. Press the corresponding value button below the desired card.
3. Retrieve the dispensed card from the machine.

Parameter Settings:

1. Press the enter button to access settings mode.
2. Use the up, down, left, and right buttons to change parameters as needed.
3. Exit settings mode after making all necessary changes.

Easy Troubleshooting:

1. No Display on Screen:
   • Check cables from the main board to the screen for any issues.
   • Ensure the main board is functioning properly; if not, consider replacing the display.
2. Coin or Bill Acceptor Not Working:
   • Check cables connected to the acceptors.
   • Verify if the indicator light for the acceptor is on.
   • If needed, replace the malfunctioning acceptor.
3. No Card Dispensed After Inserting Money:
   • Check the functionality of the button first.
   • Inspect and ensure proper operation of the card dispenser.
4. Continuous Beeping:
   • Check the card levels in the dispenser and add more cards if needed.

D. Wiring:

• Mainboard J6 screen port signal
• Mainboard JP3 function list

FAQ

• Q: What should I do if the machine is not accepting coins or bills?
  • A: First, check the cables connected to the acceptors and ensure that the indicator light is on. If the issue persists, consider replacing the malfunctioning acceptor.
• Q: How do I change the parameters on the machine?
  • A: Press the enter button to access settings mode, then use the directional buttons to make necessary parameter changes before exiting settings mode.
• Q: Why is there no display on the screen?
  • A: Check the cables running from the main board to the screen for any faults. If the main board is functioning correctly, consider replacing the display if necessary.

How to use

1. Insert coin or bill
2. Press below corresponding value button
3. Take the dispensed card

Parameter settings

Press enter button for settings: Change parameter by up, down, left and right button. Exit after marking all changes.

 

Easy trouble shooting

1. Nothing on the display screen.
   • Check if cables from main board to scree is no problem.
   • Check if the main board is working, if no problem, replace the display.
2. Coin acceptor or bill acceptor not working.
   • Check cables
   • Check if coin acceptor or bill acceptor indicator light is on
   • Replace bill acceptor or coin acceptor
3. Money was inserted but no card came out.
   • Check button first to see if it’s working
   • Check card dispenser
4. Continuous Beeping.
   • Check the levels of the cards in the card dispensers. Add cards to card dispenser.

Wiring

Mainboard J6 screen port signal

Mainboard JP3 function list

Main board JP1function list

Documents / Resources

PIPELINE MS7693 Game Card Vending Machine [pdf] Instruction Manual MS7693 Game Card Vending Machine, MS7693, Game Card Vending Machine, Vending Machine

References

• User Manual