NATIONAL INSTRUMENTS PXIe-8135 Embedded Controller
COMPREHENSIVE SERVICE
We offer competitive repair and calibration service, as well as easily accessible documentation and free downloadable resources.
SELL YOUR SURPLUS
We buy new, decommissioned, and surplus parts from every NI series. We work out the best solution to suit your individual needs.
Sell For Cash Get Credit Receive a Trade-In Deal
OBSOLETE NI HARDWARE IN STOCK & READY TO SHIP
We stock New, New Surplus, Refurbished, and Reconditioned NI Hardware.
Bridging the gap between the manufacturer and your legacy test system.
Request a Quote 
CLICK HERE PXIe-8135
Board Assembly Part Number(s)
| Board Assembly Part Number(s) | Description |
| 153034G-011L through 153034G-921L | NI PXIe-8135, CORE I7-3610QE, 2.3GHZ CONTROLLER |
Manufacturer
National Instruments
Volatile Memory
|
Type1 |
Size | User Accessible/ System Accessible2 | Battery Backup? | Purpose | Method of Clearing3 |
|
DDR3 SDRAM |
4+ GB | Yes/Yes | No | Controller RAM |
Cycle Power |
| CMOS RAM | 256 B | Yes/Yes | Yes | PCH CMOS |
Remove CMOS battery |
Non-Volatile Memory
|
Type |
Size | User Accessible/ System Accessible | Battery Backup? | Purpose | Method of Clearing |
| SPI Flash | 1 Mbit | No/Yes | No | Ethernet port firmware |
None Available to User |
|
CPLD |
1200 LUTs | No/No | No | Power sequence / watchdog | None Available to User |
| EEPROM | 2 Kbits | No/No | No | GPIB configuration |
None Available to User |
|
SPI Flash |
32 Mbits | No/Yes | No | Management Engine | None Available to User |
| SPI Flash | 32 Mbits | No/Yes | No | BIOS configuration |
None Available to User |
|
CPLD |
192 Macro Cells | No/No | No | PXI Trigger router | None Available to User |
| EEPROM | 256 Kbits | No/No | No | PLX switch configuration |
None Available to User |
Media Storage
|
Type |
Size | User Accessible/ System Accessible | Battery Backup? | Purpose | Method of Clearing |
| Hard Drive | 250+ GB | Yes/Yes | No | Primary Disk Drive |
Remove from controller4 |
- Calibration constants that are stored in device EEPROMs include information for the device’s full operating range. Calibration constants do not maintain any unique data for specific configurations at which the device is used unless otherwise specified.
- Items are designated No for the following reason(s):
a) Hardware changes or a unique software tool from National Instruments are required to modify contents of the memory listed.
b) Hardware-modifying software tools are not distributed to customers for any personal access or customization, also known as non-normal use. - The designation None Available to User indicates that the ability to clear this memory is not available to the user under normal operation. The utilities required to clear the memory are not distributed by National Instruments to customers for normal use.
- Since a hard drive cannot be cleared, to declassify a system containing a PXI embedded controller, the controller’s hard drive must be removed as part of the declassification procedure. This can be done by removing the controller from the system or removing the hard drive from the controller during declassification. Alternatively, the hard drive can be permanently removed from the controller and a Compact PCI (c PCI) hard drive carrier/interface can be used to provide an easily removable, bootable hard drive.
Terms and Definitions
User Accessible Allows the user to directly write or modify the contents of the memory during normal instrument operation.
System Accessible Does not allow the user to access or modify the memory during normal instrument operation. However, system accessible memory may be accessed or modified by background processes. This can be something that is not deliberate by the user and can be a background driver implementation, such as storing application information in RAM to increase speed of use.
Cycle Power The process of completely removing power from the device and its components. This process includes a complete shutdown of the PC and/or chassis containing the device; a reboot is not sufficient for the completion of this process.
Volatile Memory Requires power to maintain the stored information. When power is removed from this memory, its contents are lost.
Non-Volatile Retains its contents when power is removed. This type of memory typically contains calibration or chip configuration information, such as power up states.
Customers Support
Contact: 866-275-6964
support@ni.com
1-
All trademarks, brands, and names are the property of their respective owners.
Documents / Resources
 |
NATIONAL INSTRUMENTS PXIe-8135 Embedded Controller [pdf] User Guide 153034G-011L through 153034G-921L, PXIe-8135, PXIe-8135 Embedded Controller, Embedded Controller, Controller |
