myFirst Camera Insta 20 Thermal Printing Camera
Things to do before you start
- Charge your camera
Charging time up to 2 hours
- Insert a memory card
Storage support up to 32 GB
- Place a roll of thermal paper
into the holder like this
- Use the paper roll that is provided
OR choose the right measurement of paper roll for your camera
Follow step by step
- Power on
Press and hold
to turn on the camera.
- Take a photo
Press
to take a photo.
- Take a video
Press and hold to take a video. Press again to stop.
- Take a selfie
Press and hold
to switch to the selfie lens.
- Print a photo
Press
to print a photo.
- Effects
Press + or – to apply filters, templates and 9- box grid.
- Browse gallery
Press
to enter the Gallery mode.
Press + or – to browse the gallery.
For video, you can press to playback your video.
- Delete the media
Under Gallery mode, you can to pop up a delete menu.
Use + and – to confirm or cancel the deletion.
Press the to confirm your selection.
- Settings
Press to enter the Settings menu.
Use + and – to select the settings options.
Press to enter the sub-menu. Press again to save and exit.
- Shortcut: Adjust Print Density
In Camera or Gallery Mode, long press to open the Print Density menu.
Use this to quickly choose the print density that best suits your needs.
Specifications
- 3.0” IPS color screen
- Resolution : 16MP/12MP/8MP/5MP
- Video Resolution : 1920*1080 / 30fps
- Battery Capacity : 800mAh / 7.4V
- Charging Time : 2 hours
- Charging Power : DC-5V/1.5A
- Storage : Memory card up to 32GB
- Camera Dimensions : 104*75*44mm
- 3 Rolls High Quality Thermal Paper
- Neck Lanyard included
| Equipment name: my First Camera Insta 20, Type designation (Type): FC3001 | ||||||
| Unit | Restricted substances and its chemical symbols | |||||
| (Pb) | (Hg) | (Cd) | Hexavalent chromium (Cr+6) | Poly brominated biphenyls (PBB) | Poly brominated diphenyl ethers(PBDE) | |
| shell |
◯ |
◯ |
◯ |
◯ |
◯ |
◯ |
| panel |
◯ |
◯ |
◯ |
◯ |
◯ |
◯ |
| motherboard |
◯ |
◯ |
◯ |
◯ |
◯ |
◯ |
| power cord |
◯ |
◯ |
◯ |
◯ |
◯ |
◯ |
| screw |
◯ |
◯ |
◯ |
◯ |
◯ |
◯ |
| Note 1: “Exceeding 0.1 wt 0/0 ^ prime prime and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.
Note 2: 40 ” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. Note 3: The indicates that the restricted substance corresponds to the exemption. |
||||||
Documents / Resources
 |
myFirst Camera Insta 20 Thermal Printing Camera [pdf] User Manual Insta_20, Camera Insta 20 Thermal Printing Camera, Camera Insta 20, Thermal Printing Camera, Printing Camera, Camera |