LUXPRO LOGO

LUXPRO LP347V2 Super Bright Multi-function and Multi-color Headlamp

LUXPRO LP347V2 Super Bright Multi-function and Multi-color Headlamp

Features

  • Durable ABS and rubberized compact design
  • LPE optics
  • Dual button operation
  • Non-slip adjustable headband
  • 45° adjustable head
  • IPX4 waterproof rating
  • Batteries included (3 AAA)

Product Warranty

The LP347V2 has a Limited 90-Day Warranty Against Manufacturer’s Defects from time of purchase.
For warranty claims please contact us by calling 801-553-8886 or sending an email to info@simpleproducts.com

ANSI/PLATO FL1 STANDARD

MODES LUMENS  LUXPRO LP347V2 Super Bright Multi-function and Multi-color Headlamp-5  

 RUN TIMELUXPRO LP347V2 Super Bright Multi-function and Multi-color Headlamp-6

BEAM DISTANCE

LUXPRO LP347V2 Super Bright Multi-function and Multi-color Headlamp-7

 

High

Spot Modes

450 lm         2h 45m

 

130m

Low 130 lm         4h 15m 45m
Strobe 450 lm              —

Flood Modes

White 60 lm              5h 20m
Red 25 lm              2h 10m
Green 50 lm              4h 15m

Operation Instructions

Spot On/Off & Cycle Modes: Press and release the button on the right of the headlamp to turn spotlight on. Press button repeatedly to cycle through modes (High/Low/Strobe).

LUXPRO LP347V2 Super Bright Multi-function and Multi-color Headlamp-2

Flood On/Off & Cycle Modes: Press and release the button on the left of the headlamp to turn flood light on. Press button repeatedly to cycle through modes (White/Red/Green).

LUXPRO LP347V2 Super Bright Multi-function and Multi-color Headlamp-3

Battery Replacement

The LP347V2 uses 3 AAA batteries.
To replace the batteries, first locate the plastic tab on the top of the headlamp. Gently push the tab up and outward using your thumb to pop the battery cover loose and open it. Remove the old batteries and insert new batteries according to the (+/-) symbols in the battery tubes. For best results, we recommend using brand-new alkaline batteries that are the same voltage and brand.
To re-attach the battery cover, press the headlamp housing and battery cover together until it clicks into place. Check that the battery cover is secured by gently tugging on the headlamp straps while holding the main housing firm.

LUXPRO LP347V2 Super Bright Multi-function and Multi-color Headlamp-4

If you know it will be a while between uses, we suggest removing the batteries from the headlamp and storing it in a dry, protected place.

luxpro.com
866.553.8886

14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065

Documents / Resources

LUXPRO LP347V2 Super Bright Multi-function and Multi-color Headlamp [pdf] User Manual
LP347V2 Super Bright Multi-function and Multi-color Headlamp, LP347V2, Super Bright Multi-function and Multi-color Headlamp, Multi-color Headlamp, Multi-function Headlamp, Headlamp, Bright Headlamp, Headlamp

References

Leave a comment

Your email address will not be published. Required fields are marked *