Linxura logoLinxura SCHA-1-SP Network Thermostat Smart Controller

Network Thermostat Setup Guide Video Link: https://youtu.be/Nqg3Q67zoko

Supported Features for the Network Thermostat

Network Thermostat button action description table

Actions Supported Mode Descriptions
Click/Double Click Mode: Heat, Cool, Auto, Eco Heat: Switch to Heat mode. Cool: Switch to Cool mode. Auto: Switch to Auto mode. Eco: Switch to Eco mode. Off: Turn off the thermostat.
Temperature: Heat Setpoint, Cool Setpoint Heat Setpoint: Activate heating when below set temperature.
Cool Setpoint: Activate cooling when above set temperature.
Rotate Clockwise/ Rotate
Counterclockwise
Temperature Up, Temperature Down Temperature Up: Raise the temperature by a preset percentage per  rotation.
Temperature Down: Lower the temperature by a preset percentage per rotation.

How to link Linxura with Network Thermostat.

Step 1:
Make sure your Network Thermostat device is set up in the Network Thermostat app and functioning properly. Make sure Linxura, Linxura app, Hunter Douglas are connected to same Wi-Fi network.
Step 2:
Open your Linxura app and then select the Linxura you want to bind with Network Thermostat.Linxura SCHA-1-SP Network Thermostat Smart Controller - step 1Step 3:
Choose a button.Linxura SCHA-1-SP Network Thermostat Smart Controller - step 2Step 4:
Click ‘Select platform’.Linxura SCHA-1-SP Network Thermostat Smart Controller - step 3Step 5:
Select ‘Network Thermostat’ option.Linxura SCHA-1-SP Network Thermostat Smart Controller - step 4Step 6:
Select Network Thermostat devic.
Linxura SCHA-1-SP Network Thermostat Smart Controller - step 5Step 7:
Log in to your Network Thermostat account and click ‘Save.’Linxura SCHA-1-SP Network Thermostat Smart Controller - step 6

How to use Linxura to control the Network Thermostat device.

Step 1:
Click the ‘+’ icon to add a Click Action.
Linxura SCHA-1-SP Network Thermostat Smart Controller - step 7Step 2:
Click ‘Mode’ and select one of the options.
Linxura SCHA-1-SP Network Thermostat Smart Controller - step 8Step 3:
Select one of the Options.Linxura SCHA-1-SP Network Thermostat Smart Controller - step 9Step 4:
Click ‘Temperature’.Linxura SCHA-1-SP Network Thermostat Smart Controller - step 10Step 5:
Set the temperature of the NetworkThermostat.
Linxura SCHA-1-SP Network Thermostat Smart Controller - step 11Step 6:
Click the ‘Save’.
Linxura SCHA-1-SP Network Thermostat Smart Controller - step 12Step 7:
You can follow the same steps to configure Double Click, Rotate Clockwise, and Rotate Counterclockwise.Linxura SCHA-1-SP Network Thermostat Smart Controller - step 13You can now use Linxura to control your Network Thermostat!Linxura logo

Documents / Resources

Linxura SCHA-1-SP Network Thermostat Smart Controller [pdf] User Guide
SCHA-1-SP Network Thermostat Smart Controller, SCHA-1-SP, Network Thermostat Smart Controller, Thermostat Smart Controller, Smart Controller, Controller

References

Leave a comment

Your email address will not be published. Required fields are marked *