LABELMATE C6500 Unwinder Alignment Plate Instruction Manual
Arrange Alignment Plates
- Position the Alignment Plates adjacent to each other with the shaped sides facing inward.
Position Printer - Set the printer between the Alignment Plates, aligning its feet with the notches in the Plates.
- Slide the Alignment Plates inward beneath the printer until they press against the printer feet.
Position Winders - Place Winders firmly in position next to the outer bars of the Alignment Plates.
- Align the Winders with the printer by sliding them forward/backward as necessary until the front base of the Winders is positioned at the 10.5” mark of the Alignment Plates.
Documents / Resources
 |
LABELMATE C6500 Unwinder Alignment Plate [pdf] Instruction Manual C6500 Unwinder Alignment Plate, C6500, Unwinder Alignment Plate, Alignment Plate, Plate |
