Klipsch RP-140WM Wireless Bookshelf Speaker (Pair)
REFERENCE PREMIERE | HD WIRELESS
HD CONTROL CENTER
- ON /OFF
- MUTE
- SOURCE
- VOLUME UP
- VOLUME DOWN
- Service Port
- 3.5mm IR Input
- Coaxial Input
- Optical Input
- RCA Analog Inputs
- HDMI Input 1
- HDMI Input 2
- HDMI Input 3
- HDMI Input 4
- HDMI OUT / TV
- Power Input DC 5V
HD CONTROL CENTER
SETUP
INSTALLATION
REMOTE
To learn more about Sound Modes, EQ Adjustments, and Surround Effect Modes please see the extended manual at Klipsch.com/RP-HD-WIRELESS-MANUAL
BLUETOOTH ® WIRELESS TECHNOLOGY
CARE AND CLEANING
For more in-depth information and troubleshooting, instructions visit KLIPSCH.COM/RP-HD-WIRELESS
FAQS
It does not come with a separate stand, it comes exactly as pictured.
The wireless hub will only work with wireless speakers.
I don’t see why it cannot be positioned on its side, this should not affect its performance. However you will not be able to take off the base since all internal components are attached to the base
No must have a hub. Look at the rp150m or rp160m to hook up to your receiver
for music it’s okay. I’ve added RP-440WC and it’s WAY much better. Still without sub woofer btw.
yeah, works with 220v, Free voltage system and works in 220v
The power is conventional; there are no miracles. Only the sound is wireless.
The model RP-140WM is part of the HD Wireless WiSA multi speaker with Hub home theater speaker system. This RP-140WM would not connect with the R-28PF powered speakers as it requires a HUB connected to an audio source to send an audio signal to it
I had a problem with these staying connected so I would not buy these. They have their own WiFi connection that is often interfering with your home WiFi
No This be daisychained for multiple sources
I will never purchase anything from klipsch ever again these speakers and software are just not there yet. Already replaced the hub controller with another brand and that was not cheap.
Pairing two or more Bluetooth speakers can give you a more room-filling sound than just a single speaker, providing a richer overall sound experience
Bluetooth bookshelf speakers are a great way to listen to music without wires. The best ones are lightweight and easy to use, while still being powerful enough to give you off great sound. If you’re looking to upgrade your current audio system, here are some options.
Bluetooth technology now allows users to connect multiple sound systems to one device. And if you only have a few wired speakers lying around, then you can convert them to wireless before you begin. With the help to Bluetooth 5.0, it’s possible to connect up to two speakers to your Apple or Samsung smartphone.
In almost every Bluetooth speaker or any other Bluetooth device, an AUX port is always present to connect with a PC/Laptop/Mobile and with almost every Bluetooth speaker and wireless headphones there is an AUX cable provided.
