FPS SECURITY FPC-6355 Exit Button Entry Kits

INSTRUCTION

This Diagram is for kits: FPC-6355

ATTENTION! QUICK TIPS, MUST READ BEFORE INSTALLING:

1. You will only need to hardwire the power supply to the mini Receiver and from any electric lock to the receiver.
2. The Keypad and Exit buttons are 100% completely wireless. Installation is easier, no wire is needed to connected these devices. Just mount it on the wall and you are good to go .
3. In order to properly install this kit it is recommended that you use 18/2 or 20/2 gauge wire . . Before installing this kit, check with your local fire Authority for the compliance of fire codes.
4. We are not responsible for the improper Installation of this kit. This is an example of how it should be installed but all applications are different.
5. If you are not handy with electrical components, please consult with a certified electrician or Locksmith.
6. Make sure that when you are installing this kit, please have all components turned

Need assistance? Contact Us: 1-888-504-3318  support@fpc-security.com
www.fpc-security.com

Documents / Resources

FPS SECURITY FPC-6355 Exit Button Entry Kits [pdf] User Guide FPC-6355 Exit Button Entry Kits, FPC-6355, Exit Button Entry Kits, Button Entry Kits, Entry Kits

References

• User Manual