709H Precision Current Loop Calibrators
“
Product Information
Fluke 709/709H Precision Loop Calibrators
Best-in-class accuracy, 0.01% of reading with HART communication
capability.
Specifications
- Functions: mA source, mA simulate, mA measure,
mA measure/loop power, and volts measure - Ranges: mA (0 to 24 mA) and volts (0 to 30 V
dc) - Resolution: 1uA on mA ranges and 1 mV on
voltage range - Accuracy: 2 Operating temperature range
- Humidity range: 10% to 95% non-condensing
- Stability: Display with 128 x 64 pixels, LCD
Graphic w/backlight, .34 in high digits - Power: 6 AAA alkaline; Battery life of 40
hours continuous use (measure mode using alkaline) - Loop compliance voltage: 24 V dc @ 20 mA
- Over-voltage protection: 240 V ac
- Overload current protection: 28 mA dc
- EMC: EN61326 Annex A (Portable
Instruments) - Dimensions (LxWxD): 15 cm x 9 cm x 3 cm (6 in
x 3.6 in x 1.3 in) - Weight: 0.3 kg (9.5 oz)
- Included accessories: Traceable calibration
certificate with data, batteries, test leads, and manual - Warranty: Three-year
Product Usage Instructions
Operating Functions:
The Fluke 709/709H Precision Loop Calibrators can perform
functions such as sourcing mA, simulating mA, measuring mA,
providing loop power, and measuring volts. Ensure proper
connections and settings before using any function.
Battery Installation:
Insert the provided AAA alkaline batteries into the designated
compartment following the polarity markings. Ensure the batteries
are securely placed.
HART Communication:
If using the Fluke 709H model with HART communication
capability, ensure proper setup for communication with HART
devices. Use the provided software for configuration file uploads
and storage.
Safety Precautions:
Always adhere to safety guidelines provided in the manual.
Ensure proper handling of the device to prevent damage or
injury.
FAQ
Q: How do I perform a calibration using the Fluke 709/709H
Precision Loop Calibrators?
A: To calibrate a device, first select the appropriate function
(source/simulate/measure), set the desired range, and connect the
calibrator to the device following the proper wiring configuration.
Adjust the output to match the desired value for calibration.
Q: Can I use the Fluke 709H model for documenting plant HART
devices?
A: Yes, the Fluke 709H model offers a built-in HART modem for
communication capability to upload configuration files for
documenting plant HART devices easily.
Q: What is the warranty period for the Fluke 709/709H Precision
Loop Calibrators?
A: The product comes with a three-year warranty for added peace
of mind.
“`
Process Tools
2025-2026 Selection Guide
For Industrial Instrumentation and Electrical Technicians
> Loop Calibrators > Pressure Calibrators > Temperature Calibrators > Multifunction
Process Calibrators
> Documenting
Process Calibrators
> Calibration Software > Intrinsically Safe
Calibrators
Precision Loop Calibrators
Fluke 709/709H
(709H only)
Best-in-class accuracy, 0.01 % of reading
Fluke 709/709H Precision Current Loop Calibrators
· HART Communication (709H only) communicate with and test HART smart instruments
· Compact rugged design · Intuitive user interface with quickset knob
for fast setup, easy to use · 24 V dc loop power with mA measure mode · Resolution of 1 A on mA ranges
· Built in selectable 250 resistor for HART communications
· Simple two wire connection for all measurements
· Valve test (source and simulate defined mA values with % keys)
· Upload logged mA measurements and HART device data using the 709H with optional 709H/TRACK software
HART communication
The Fluke 709H offers a built-in HART modem for communication capability to perform the
following commands working with HART devices:
· Read and modify message
· Trim DAC zero (4 mA and 20 mA)
· Read and modify tag descriptor
· Trim DAC gain (mA output 20 mA)
· Read sensor PV information
· The Fluke 709H also offers ability to store
· Read PV output information
up to twenty HART device configuration files
· Read long tag and calibration date
for uploading via 709H/TRACK software.
· Write PV ranges (upper and lower)
Configurations can be stored as .csv or .txt
· Write PV units
files. This allows the end user to document
· Enter/exit fixed current mode
plant HART devices easily
· Set zero offset
Specifications for Fluke 709 and 709H
Functions
mA source, mA simulate, mA measure, mA measure/loop power, and volts measure
Ranges
mA (0 to 24 mA) and volts (0 to 30 V dc)
Resolution
1uA on mA ranges and 1 mV on voltage range
Accuracy
2 Operating temperature range
0.01 % ± 2 counts all ranges (@ 23° ± 5 °C) -10 °C to 55 °C (14 °F to 131 °F)
Humidity range
10 % to 95 % non-condensing
Stability
20 ppm of F.S. /°C from -10 °C to 18 °C and 28 °C to 55 °C
Display
128 x 64 pixels, LCD Graphic w/backlight, .34 in high digits
Power
6 AAA alkaline
Battery life
40 hours continuous use (measure mode using alkaline)
Loop compliance voltage
24 V dc @ 20 mA
Over-voltage protection
240 V ac
Overload current protection
28 mA dc
EMC
EN61326 Annex A (Portable Instruments)
Dimensions (LxWxD)
15 cm x 9 cm x 3 cm (6 in x 3.6 in x 1.3 in)
Weight
0.3 kg (9.5 oz)
Included accessories
Traceable calibration certificate with data, batteries, test leads, and manual
Warranty
Three-year
For full specifications visit fluke.com/en-us/product/calibration-tools/ma-loop-calibrators/fluke-709h
mA Loop Calibrators
Valve testing and HART communication in a precision loop calibrator
710 mA Loop Valve Tester
The 710 has built-in test procedures that automatically increase and change the mA signal while monitoring the HART position and pressure feedback from the control valve, giving you a better overall picture of valve health at the simple push of a button. · Key valve testing functions include pre-configured valve signature test, speed test, step test,
manual test, and bump/partial stroke test · Key mA loop calibrator functions include mA source, mA simulate, mA read, mA read/loop
power, and volts read · ValveTrackTM Software enables upload to a PC for further in-depth analysis of valve
measurements that are logged and recorded to memory
Specifications
Functions
mA source, mA simulate, mA read, mA read/loop power, and volts read
Ranges
mA (0 to 24 mA) and Volts (0 to 30 V dc)
Resolution
1uA on mA ranges and 1 mV on voltage range
Accuracy
0.01 % ± 2 counts all ranges (@ 23° ± 5 °C)
Operating temperature range
-10 °C to 55 °C (14 °F to 131 °F)
3
Humidity range
10 % to 95 % non-condensing
Stability
20 ppm of F.S. /°C from -10 °C to 18 °C and 28 °C to 55 °C
Display
128 x 64 pixels, LCD Graphic w/backlight, .34 in high digits
Power
6 AAA alkaline
Battery life
40 hours continuous use (measure mode using alkaline)
Loop compliance voltage
24 V dc @ 20 mA
Over-voltage protection
240 V ac
Overload current protection
28 mA dc
EMC
EN61326 Annex A (Portable Instruments)
Dimensions (LxWxD)
15 cm x 9 cm x 3 cm (6 in x 3.6 in x 1.3 in)
Weight
0.3 kg (9.5 oz)
Included accessories
Traceable calibration certificate with data, batteries, test leads, USB upload cable and safety
Warranty
Three-year
For full specifications visit fluke.com/en-us/product/calibration-tools/ma-loop-calibrators/fluke-710
ProcessMeterTM Test Tools
Multimeter and Loop Calibrator–all in one
(789 only)
Fluke 789 ProcessMeterTM Test Tool
Compact digital multimeter and mA loop calibrator solution.
· Unique, wireless data logging capabilities with Fluke ConnectTM* · 24 V loop power supply · 20 mA drive into 1200 W · 0 % to 100 % mA Span Check buttons to toggle from 4 mA to 20 mA · Infrared I/O serial port compatible with FlukeView® Software · PLUS all the proven 787B features below
Fluke 787B ProcessMeterTM Test Tool
789
787B
· Simultaneous mA and % of scale readout on mA output · 25 % manual step plus auto step and auto ramp on mA output · CAT III, 1000 V, CAT IV, 600 V safety rated DMM · Measure volts, amps, resistance, and frequency
*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.
Specifications for Fluke 789 and 787B (18 °C to 28 °C, 1 year)
Measurement function
Best accuracy range and resolution
V dc V ac (true-rms) to 500 Hz
400.0 mV, 4.000 V, 40.00 V 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V
mA dc
30.000 mA
A dc
1.000 A (0.440 A continuous)
A ac Resistance
1.000 A (0.440 A continuous) 400.0 W, 4.000 k, 40.00 k
Frequency
4 Diode test
Continuity
199.99 Hz, 1999.9 Hz, 19.999 kHz 2.000 V (shows diode voltage drop) Beeps for resistance < approx. 100 W
Output function
Range and resolution
DC current output
DC current simulate (ext. loop supply)
0.000 mA to 20.000 mA or 4.000 mA to 20.000 mA (selectable at power-up) Over-range to 24.000 mA
0.000 mA, to 20.000 mA or 4.000 mA, to 20.000 mA, (selectable at power-up) Over-range to 24.000 mA
24 V loop supply
789: minimum 24 V 787B: not available
(% of reading + count) 0.1 % + 1 0.7 % + 2 .05 % + 2 0.2 % + 2 1 % + 2 0.2 % + 1 .005 % +1 (0.5 Hz to 20 kHz) 2 % + 1
Drive capability 24 V compliance or, 1200 @ 20 mA
15 V to 48 V
24 V @ 24 mA, 1200 (789 only)
Accuracy (% of span) .05 %
.05 %
For full specifications visit fluke.com/en-us/products/calibration-tools/ma-loop-calibrators
Loop Calibrators
Fluke 705
Fluke 707
Fluke 715
Fluke 705, 707 and 715 mA Loop Calibrators
· Simultaneous mA and % readout for quick, easy, readings
· Push button 25 % steps for fast, linearity checks · Output ramp and step modes · 24 V internal loop supply
Fluke 707 mA Loop Calibrators adds
· Quick click front panel selector for fast, one-hand operation
Fluke 715 Volt/mA Calibrator adds
· Source voltage to 200 mV or 20 V · Measure loop current with 0.010 % accuracy and
0.001 mA resolution
Model
705
707
715
Measure
V dc
28 V
28 V
25 V
mA dc
24 mA
24 mA
24 mA
Source/Simulate
V dc
20 V
mA dc/% scale
24 mA
24 mA
24 mA
mA source; auto step, auto ramp
·
·
·
Features
24 V loop supply
·
·
·
5
Traceable certification
·
·
·
Accessories1
C
C
A/B
1. Accessories: A. Compatible with LockPak B. Compatible with ToolPak C. Accepts hanging straps from ToolPak
For full specifications visit fluke.com/en-us/products/calibration-tools/ma-loop-calibrators
Milliamp Process Clamp Meters
Fluke 771
Fluke 772
Fluke 773
Fluke 771 Milliamp Process Clamp Meter
· Measure mA signals for PLC and control system analog I/O
· Measure 4-20 mA output signals from transmitters without breaking the loop
· Resolution and sensitivity to 0.01 mA, accuracy 0.2 % · Dual backlit display with both mA measurement and
percent of span · Measurement spotlight illuminates hard to see wires in
dark enclosures · Detachable clamp with one meter cable
Fluke 772 Milliamp Process Clamp Meter adds
· mA source, simulate and 24 V loop power · Test mA input devices and troubleshoot 4-20 mA loops
Fluke 773 Milliamp Process Clamp Meter adds
· DC voltage source and measure · Test voltage input devices and measure 24 V loop
power supplies · Advanced troubleshooting functions
Model
Measure V dc mA dc Source/Simulate
6 V dc
mA dc/% scale mA source; auto step, auto ramp Record Hold Features 24 V loop supply
771 99.9 mA 24 mA ·
772
99.9 mA
24 mA · · ·
773
30 V 99.9 mA
10 V 24 mA ·
·
·
For full specifications visit fluke.com/en-us/products/calibration-tools/ma-loop-calibrators
Pressure Calibrators
717
718
719 Pro
Fluke 719 and 719PRO Electric Pressure Calibrators
· Electric pump enables one-handed pressure pumping and makes pressure calibration quicker and easier
· Best in class 0.025 % pressure measurement accuracy · 719: Two ranges, 30 psi and 100 psi · 719PRO: Three ranges 30, 150 and 300 psi · 719PRO: Precision temperature measurement with optional 720RTD Probe · 719PRO: Programmable pump limit settings
Fluke 717 Pressure Calibrators
· Measure up to 10,000 psi/690 bar sensor · Compatible with non-corrosive gases and liquids on
500 psi and higher ranges
Fluke 718 Pressure Calibrators
· 1, 30, 100 and 300 psi ranges available · Pump to 300 psi, 20 bar with internal pump
(718-300G) · 718-1G has special low volume pump, high measure-
ment resolution for low pressure
718 and 719 · Precision vernier for fine pressure adjustment · Variable release rate bleed valve for controlled pres-
sure release
717, 718 and 719 common features · Pressure switch test makes a difficult task easy, cap-
tures set, reset and deadband values of a pressure switch · 717, 718 and 719 measure pressure to 0.025 % of full scale · Measure mA with 0.015 % accuracy, while sourcing 24 V loop power
Models
Range
Resolution
Comment
717-1G, 718-1G 717-15G
+/- 1 psi, 27.5 inH20, (-7 to +7 kPa) -12 to 15 psi, -83 to 103 kPa
+0.0001 psi, 0.0001 kPa, 0.001 inH2O
Dry air only. Fluke 718 includes on board pump.
0.001 ps1, 0.01 kPa
Dry air only.
717-30G, 718-30G, 719-30G, 719Pro-30G
717-100G, 718-100G
-12 to + 30 psi, (-83 to 207 kPa)
-12 to + 100 psi, (-83 to 690 kPa)
0.001 psi, 0.01 kPa 0.01 psi, 0.01 kPa
Dry air only. Fluke 718 and Fluke 719 include on board pump.
Dry air only. Fluke 718 includes on board pump. 717-
7
100G compatible with non-corrosive gases and fluids.
719Pro 150G
-12 to 150 psi
0.01 psi, 0.01 kPa
Fluke 719Pro dry air only and includes on board pump.
717-300G, 718-300G,
-12 to +300 psi,
719-100G, 719Pro 300G (-83 to +2070 kPa)
0.01 psi, 0.1 kPa
Fluke 718, 719 and 719Pro dry air only include on board pump. 717 compatible with non-corrosive gases and fluids.
717-500G
0-500 psi, 0-3450 kPa
0.01 psi, 0.1 kPa
Compatible with non-corrosive gases and fluids
717-1000G
0-1000 psi, 0-6900 kPa
0.01 psi, 0.1 kPa
Compatible with non-corrosive gases and fluids
717-1500G
0-1500 psi, 0-10342 kPa
0.1 psi, 1 kPa
Compatible with non-corrosive gases and fluids
717-3000G
0-3000 psi, 0-20700 kPa
0.1 psi, 1 kPa
Compatible with non-corrosive gases and fluids
717-5000G
0-5000 psi, 0-34500 kPa
0.1 psi, 1 kPa
Compatible with non-corrosive gases and fluids
717-10000G
0-10000 psi, 0-69000 kPa 1 psi, 1 kPa
Compatible with non-corrosive gases and fluids
Pressure accuracy
mA measurement Loop power
0.035 % of range, one year. 0.025 % for six months, 717 and 718-1G: 0.05 % one year, 718 and 717-300G 0.035 % six months, 0.05 % one year
0-24 mA range
0.001 mA resolution
Accuracy: ± 0.015 % + 1 count
24 V dc
Accuracy: ± 10 %
For full specifications visit fluke.com/pressurecalibrators
Precision Pressure Test Gauges
Fluke 700G
Intrinsically safe, pressure gauge calibrator for fast and accurate calibration test results.
Fluke 700G Series Precision Pressure Gauge
· Precision pressure measurement from ± 10 inH2O/20 mbar to 10,000 psi/690 bar
· Absolute pressure measurement ranges 15, 30, 100, 300 psia · Accuracy to 0.05 % of full scale · Reference class gauge accuracies to 0.04 % of reading · Easy to use, rugged construction for reliable performance · CSA; Class 1, Div 2, Groups A-D rating · ATEX rating: EX II 3 G Ex ic IIB T6 Gc · Combine with the 700PTPK2 or 700HTPK2 pump kits for a complete
pressure testing solution for up to 600 psi (40 bar) with the PTP-1 pneumatic pump and up to 10,000 psi (690 bar) with the HTP-2 hydraulic pump · Log up to 8,493 pressure measurements to memory (requires 700G/ TRACK software) · Three-year warranty
8
Fluke-700PTPK2 Pneumatic Test Kit
Fluke-700HTPK2 Hydraulic Test Kit
700G/TRACK Logging Software
For full specifications visit fluke.com/700G
Model Fluke-700G01 Fluke-700G02 Fluke-700G04 Fluke-700G05 Fluke-700G06 Fluke-700G27 Fluke-700G07 Fluke-700G08 Fluke-700G10 Fluke-700G29 Fluke-700G30 Fluke-700G31 Fluke-700GA4 Fluke-700GA5 Fluke-700GA6 Fluke-700GA27 Fluke-700RG05
Range -10 to +10 inH2O -1 psi to +1 psi -14 psi to 15 psi -14 psi to 30 psi -12 psi to 100 psi -12 psi to 300 psi -12 psi to 500 psi -14 psi to 1000 psi -14 to 2000 psi -14 psi to 3000 psi -14 psi to 5000 psi -14 psi to 10000 psi 0 psia to 15 psia 0 psia to 30 psia 0 psia to 100 psia 0 psia to 300 psia -14 psi to +30 psi
Resolution 0.001 inH20 0.0001 psi 0.001 psi 0.001 psi 0.01 psi 0.01 psi 0.01 psi 0.1 psi 0.1 psi 0.1 psi 0.1 psi 1 psi 0.001 psi 0.001 psi 0.01 psi 0.01 psi 0.001 psi
Accuracy Positive pressure ± 0.1 % of range, Vacuum ± 0.1 % of range
Positive pressure ± 0.05 % FS Vacuum ± 0.1 % FS
± 0.05 % of range
Positive pressure, ± 0.04 % of reading +.01 % of range, Vacuum ± 0.05 % of range
Fluke-700RG06
-12 psi to 100 psi
0.001 psi
Fluke-700RG07
-12 psi to 500 psi
0.01 psi
Fluke-700RG08
-14 psi to 1000 psi
0.01 psi
Positive pressure, ± 0.04 % of reading
Fluke-700RG29
-14 psi to 3000 psi
0.1 psi
+.01 % of range, Vacuum ± 0.1 % of range
Fluke-700RG30
-14 psi to 5000 psi
0.1 psi
9
Fluke-700RG31
-14 psi to 10000 psi
1 psi
700R Ranges: Temperature Compensation 0 e°C to 50 °C (32 °F to 122 °F) to rated accuracy. For temperatures from -10 °C to 0 °C and 50 °C to 55 °C, add .005 % FS/°C
Media compatibility · 10 inH20, 1, 15, 30 psi: any clean dry non-corrosive gas · 100 psi and above: any liquids or gases compatible with 316 stainless steel.
For full specifications visit fluke.com/700G
Pressure Calibrators
Fluke 721 and 721Ex Precision Pressure Calibrators
· Ideal tool for gas custody transfer applications · Intrinsically Safe (721Ex version only)–IECEx and Atex Ex ia IIB T3 Gb (Zone 1) · Take simultaneous static and differential pressure measurements · Best in class accuracy of 0.025 % · Pt100 RTD input for precision temperature measurement (probe optional) · Measures 4 to 20 mA signals and provides 24 V loop power (721 models only) · Measure up to 30 V dc to check 24 V loop power supplies (721 models only) · Extend pressure measurement range with 750P Series Pressure Modules (50 ranges) (721
models only)
Fluke 721
Model
Ex available
Low pressure sensor
Range Resolution sensor 1 sensor 1
Accuracy sensor 1
High pressure sensor
Range sensor 2
Resolution sensor 2
Accuracy sensor 2
Fluke-721-1601
-12 psi to +100 psi
Fluke-721-1603
·
-12 psi to +300 psi
0.01 psi
Fluke-721-1605
Fluke-721-1610
Fluke-721-1615
·
Fluke-721-1630
·
-14 psi to +16 psi
-12 psi to +500 psi 0 psi to +1000 psi 0 psi to +1500 psi 0 psi to +3000 psi
0.1 psi
0.025 % of full scale
Fluke-721-1650 Fluke-721-3601
0.001 psi,
0.025 % of full scale
0 psi to +5000 psi -12 to +100 psi
0.035 % of full scale
Fluke-721-3603
-12 psi to +300 psi
0.01 psi
Fluke 721Ex
Fluke-721-3605
Fluke-721-3610
Fluke-721-3615
·
Fluke-721-3630
·
-14 psi to +36 psi
-12 psi to +500 psi 0 psi to +1000 psi 0 psi to +1500 psi 0 psi to +3000 psi
0.1 psi
0.025 % of full scale
Fluke-721-3650
·
10
0 psi to +5000 psi
0.035 % of full scale
Each of the above models also available with an Ex rating
Media compatibility: liquids or gases compatible with 316 stainless steel
3130 Portable Pressure Calibrator
Measure and generate pressures from vacuum to 300 psi.
· Internal pump can generate vacuum to -12 psi or pressure to 300 psi · Supply pressure connection allowing the use of external gas supply up to 300 psi · Measure or generate 4 to 20 mA
3130
Parameter Pressure mA Volts
Range -80 kPa to 2 MPa (-12 to 300 psi, -0.8 to 20 bar)
0 to 20 mA
0 to 30.000 V dc
Total uncertainty 1-year
0.025 % of reading ± 0.01 % FS
0.015 % of reading ± 0.002 mA
0.015 % of reading ± 0.002 V
Comment Compatible with 750P modules 4-20 mA and loop power
Switch testing
For full specifications visit fluke.com/en-us/products/calibration-tools/pressure-calibrators
Pressure Calibrators
Fluke 729
(729 only)
Fluke 729 Pro
Portable automatic pressure calibrator simplifies pressure calibration
Fluke 729 Automatic Pressure Calibrator
· Automatic pressure generation and regulation to 300 psi · Configure procedures for pressure transmitters and switches · Measure, source, and simulate 4 to 20 mA signals · Troubleshoot and calibrate HART smart transmitters · Automatically document test results
Fluke 729 Pro Automatic Pressure Calibrator
· Automatic pressure generation and regulation to 1000 psi · Replaceable pressure control modules · Built-in test templates, one-key calibration · HART communication · Pressure leakage testing · Automatic fine-pressure adjustment, automatic pressure stabilization · Quick pressure release valve with a muffler · Extend measurement range with 750P Series pressure modules · Measure temperature with 720RTD probe · Bright dual-three-channel /color graphic display · Rugged and portable design with standard 3-year warranty · Absolute and gage pressure modules up to 7MPa
Models
729 30G
729 150G
729 300G
729 Pro 7M
729 Pro 4M
Pressure control range
-12.000 to 30.000psi -0.82737 to 2,06842 bar, -82.737 to 206.843 kPa
-12.000 to 150.000psi -0.82737 to 10.3421 bar
-12.000 to 300.000psi -0.82737 to 10.3421 bar
-13 to 1000 psi, -90 to
-13 to 600 psi, -90 to
7000 kPa, -0.90 to 70 bar 4000 kPa, -0.90 to 40 bar
Pressure type
Gauge
Gauge
Gauge
Gauge/absolute (Depends on the type of internal or external pressure module
Pressure accuracy and control stability
0.02% of FS, 0.005% of FS
Replaceable pressure
11
measurement
No
No
No
Includes 7M Module Includes 4M Module
modules
mA sourcing/ measurement
Yes
Yes
Yes
Yes
Yes
Voltage measurement
Yes
Yes
Yes
Yes
Yes
Loop power
24 V dc
24 V dc
24 V dc
24 V dc
24 V dc
Pressure switch testing
Yes
Yes
Yes
Yes
Yes
Pressure leakage testing
Yes
Yes
Yes
Yes
Yes
HART Communication Yes, basic commands supported
Autostep / auto ramp Yes (with customizable speed, mode and style)
Battery
Rechargeable lithium battery with charge indication (charged in the instrument or separately)
For full specifications visit fluke.com/en-us/product/calibration-tools/pressure-calibrators/fluke-729 For full specifications visit fluke.com/en-us/product/calibration-tool/pressure-calibrators/729pro
Deadweight Testers
P3000
Model Media
P3011 P3012 P3013 P3014 P3015 P3022 P3023 P3025 P3031 P3032 P3111 P3112 P3113 P3114
12 P3115
P3116 P3123 P3124 P3125 P3211 P3213 P3214 P3223 P3224 P3830 P3840 P3860
Gas Gas Gas Gas Gas Gas Gas Gas* Gas* Gas Oil Oil Oil Oil Oil Oil Oil Oil Oil Water Water Water Water Water Oil Oil Oil
*(Liquid lubricated)
Number of ranges
Single Single Single Single Single Dual Dual Dual Single Single Single Single Single Single Single Single Dual Dual Dual Single Single Single Dual Dual Single Single Single
P3100/P3200
Max range
-30 inHg (-100 kPa) 400 inH2O (100 kPa) 800 inH2O (200 kPa) 150 psi (1 MPa) 500 psi (3.5 MPa) 400 inH2O (100 kPa) 800 inH2O (200 kPa) 500 psi (3.5 MPa) 1000 psi (7 MPa) 2000 psi (14 MPa) 500 psi (3.5 MPa) 2000 psi (14 MPa) 5000 psi (35 MPa) 10000 psi (70 MPa) 16000 psi (110 MPa) 20000 psi (140 MPa) 5000 psi (35 MPa) 10000 psi (70 MPa) 16000 psi (110 MPa) 500 psi (3.5 MPa) 5000 psi (35 MPa) 10000 psi (70 MPa) 5000 psi (35 MPa) 10000 psi (70 MPa) 30000 psi (200 MPa) 40000 psi (260 MPa) 60000 psi (400 MPa)
Standard accuracy (%Rdg) 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.02 0.02 0.02
Improved accuracy (% Rdg) 0.008 0.008 0.008 0.008 0.008 0.008 0.008 0.008 0.008 0.008 0.008 0.008 0.008 0.008 0.008 0.008 0.008 0.008 0.008 0.008 0.008 0.008 0.008 0.008 0.015 0.015 0.015
Highly accurate, robust and flexible pressure measurement standards capable of calibrating a wide range of instruments.
P3000 Pneumatic Deadweight Testers
· Pressure ranges from vacuum through 2,000 psi (140 bar)
· Accuracy better than 0.015 % of reading (0.008 % optional)
· Gas operated with optional hand pumps · Dual vacuum/pressure models available · Psi, bar, kgf/cm2, kPa and MPa ranges
available · Piston/cylinder design provides
stability and repeatability
P3100 Hydraulic Deadweight Testers
· Pressure ranges to 20,000 psi (1400 bar)
· 0.015 % of reading accuracy standard (0.008 % optional)
· Single or dual piston formats · Built-in hand pumps standard · Mounted spirit level with adjustable feet · Units can be trimmed to local gravity FOC
P3200 Water Deadweight Testers
· Water operation for improved media compatibility
· Pressure ranges to 10,000 psi (700 bar)
· 0.015 % of reading accuracy standard (0.008 % optional)
· Single or dual piston formats · Built-in hand pumps standard · Mounted spirit level with adjustable feet · Units can be trimmed to local gravity FOC
For full specifications visit fluke.com/en-us/products/calibration-tools/pressure-calibration/deadweight-testers
Benchtop Pressure Calibrators
P5510
P5514B
P5515
6532
Models
Media
6531-7M
oil or water
6531-14M
oil or water
6531-20M
oil or water
6531-40M
oil or water
6531-70M
oil or water
6531-140M
oil or water
6531-200M
oil or water
6532-70M
oil or water
6532-140M
oil or water
6532-200M
oil or water
P5510-2M
gas
P5513-20M
gas
P5514B-70M
oil or water
P5514B-70M-EP oil or water
P5515-140M
oil or water
P5515-140M-EP oil or water
P3800C
oil
Range (psig) 100 to 1,000 200 to 2,000 300 to 3,000 600 to 6,000 1,000 to 10,000 2,000 to 20,000 3,000 to 30,000 100 to 10,000 200 to 20,000 300 to 30,000 vacuum to 300 vacuum to 3,000 0 to 10000 0 to 10000 0 to 20000 0 to 20000 0 to 60000
Range (MPa) 0.7 to 7 1.4 to 14 2 to 20 4 to 40 7 to 70 14 to 140 20 to 200 0.7 to 70 1.4 to 140 2 to 200 vacuum to 2 vacuum to 20 0 to 70 0 to 70 0 to 140 0 to 140 0 to 400
Uncertainty ± 0.02 % rdg ± 0.02 % rdg ± 0.02 % rdg ± 0.02 % rdg ± 0.02 % rdg ± 0.02 % rdg ± 0.02 % rdg ± 0.02 % rdg ± 0.02 % rdg ± 0.02 % rdg ** ** ** ** ** ** **
**reference pressure gauge not included-compatible with Fluke 700G (p8)
Precise generation and control for testing pressure measuring instruments against master devices.
P5510 Gas Comparison Test Pump
· Dual pressure/vacuum capability · Bench mount design · Built-in hand pump as pressure/vacuum source · High quality needle valve for fine control · Test port adapters that require no PTFE tape or
wrenches
P5513 Gas Comparison Test Pump
· High pressure pneumatic operation · Screw press for fine pressure adjustments · High quality needle valves for fine control · Test port adapters which require no PTFE tape or
wrenches · Sturdy carrying case with lid
P5514B Hydraulic Comparison Test Pump
· Generates pressures to 10,000 psi (700 bar) · Bench mounted design · Operational with a wide range of fluids · Screw press for fine pressure adjustments
P5515 Hydraulic Comparison Test Pump
· Generates pressures to 20,000 psi (1400 bar) · Operational with a wide range of fluids · Built-in hand pump for system priming and large
volume applications · High quality screw press for fine pressure control · Acrylic reservoir for visibility of fluid level and quality
6531 Electronic Deadweight Tester
· A digital alternative to the traditional deadweight tester 13 · 0.02 % of reading from 10 % to 100 % of instrument
range (10:1 turndown) · Ranges from 1000 psi (7 MPa) to 30,000 psi (200 MPa) · Integrated hydraulic pressure generation and control · Compatible with water and a wide range of oils and
other fluids · Onboard test routines, data storage, and other
advanced features
6532 Extended Range Electronic Deadweight Tester
· All the features of model 6531 with extended pressure range for maximum workload coverage
· 0.0 % of reading from 1 % to 100 % of instrument range (100:1 turndown)
· Models with full scale ranges from 10,000 psi (70 MPa) to 30,000 psi (200 MPa)
For full specifications visit fluke.com/en-us/products/calibration-tools/pressure-calibrators
Precision Temperature/ Pressure Process Calibrator
7526A
· Sources and measures dc voltage, current, resistance, RTDs and thermocouples
· Precision pressure measurement using Fluke 750P or 525A-P series pressure modules
Versatility, precision and value, combined into a single benchtop process calibration tool.
7526A Precision Process Calibrator
The Fluke Calibration 7526A Precision Process Calibrator offers the best balance of economy and accuracy for benchtop calibration of temperature and pressure process instrumentation. Easily calibrate RTD and thermocouple readouts, pressure gauges, temperature transmitters, digital process simulators, data loggers, multimeters and more.
· Includes 24 V dc transmitter loop power supply · Measures 4-20 mA loop current · Includes automated switch-test function · Accepts ITS-90 coefficients for accurate SPRT measurements · Compatible with MET/CAL® Calibration Software
DC voltage, output
Resistance, input
Range
Absolute uncertainty, ± (ppm of output + µV), 1-yr
0 to 100 mV 30
3
0 to 1 V
30
10
0 to 10 V
30
100
0 to 100 V 30
1 mV
DC voltage, isolated input
Range
Absolute uncertainty, ± (ppm of reading + mV), 1-yr
0 to 10 V
50
0.2
10 V to 100 V 50
2.0
14 DC current, output
Range[1]
Absolute uncertainty, ± (ppm of reading + µA), 1-yr
Resolution
1 µV 10 µV 100 µV 1 mV
Resolution
100 µV 1 mV
Resolution
Range
Absolute uncertainty, ± (ppm of reading + ), 1-yr
Resolution
0 to 400 20
0.004
0.001
0 to 4 k 20
0.04
0.01
Sample thermocouple, input/output (does not include all available TC types)[1]
TC type
Min
Max
Absolute
uncertainty, tcal
±5 °C, ± (°C), 1-yr
K
100 °C
800 °C
0.1
[1]See extended specifications for all TC types (B,C,E,J,K,L,N,R,S,T,U,XK,BP)Sample RTD, output (does not include all available RTD types)[1]
RTD Type
Temperature Range (°C)
Min
Max
Absolute uncertainty, tcal ±5 °C, ± (°C), 1-yr
0 to 100 mA 50
1
1 µA
[1]For line voltages less than 95 V, ±100 ppm of readingDC current, isolated input
Range
Absolute uncertainty, ± (ppm of reading + mV), 1-yr
Resolution
0 mA to
100
50 mA
1
0.1 µA
Resistance, output
Range
Absolute uncer-
Resolution
tainty, tcal ± 5 °C, ±
, 1-yr
Nominal current
5 to 400 0.015
0.001
1 to 3 mA
5 to 4 k 0.3
0.01
100 µA to 1 mA
Pt 385, 100 200
630
0.05
[1]See extended specifications for all RTD types: Pt-100 (385, 3926, 3916), Pt-200, Pt-500, Pt-1000, Ni-120, Cu-427, SPRTSample RTD, Intput (does not include all available RTD types)[1]
RTD Type
Min
Max
Absolute uncer-
tainty, tcal ±5 °C, ±
(°C), 1-yr
Pt 385, 100 80 °C 100 °C
100 °C 300 °C
0.020 0.024
1. See extended specifications for all RTD types: Pt-100 (385, 3926, 3916), Pt-200, Pt-500, Pt-1000, Ni-120, Cu-427, SPRT
For full specifications visit fluke.com/en-us/product/calibration-tools/electrical-calibration/electrical-calibrators/7526a
Field Temperature Sources
9142/9143/9144 Field Metrology Wells
High performance for industrial process environment · Fast, lightweight, and portable · Three models covering a temperature range from -25 °C to 660 °C · Stability to ± 0.01 °C · Built-in two-channel readout for PRT, RTD, thermocouple, 4-20 mA current · Optional built-in reference thermometer readout
6102/7102/7103 Micro-Baths
World’s smallest portable calibration baths
· Calibrate a variety of probe diameters – no sleeves required
9142
6102
· Three models covering a temperature range from -30 °C to 200 °C · Stability to ± 0.015 °C
Pair these temperature calibrators with the 75X Documenting Process Calibrators for a field temperature documenting solution. Requires Hart Dry Well Communication Cable.
Field Metrology Well
Micro-Bath
9142
9143
9144
6102
7102
7103
Range
-25 °C to 150 °C (-13 °F to 302 °F)
33 °C to 350 °C (91 °F to 662 °F)
50 °C to 660 °C (122 °F to 1220 °F)
35 °C to 200 °C (95 °F to 392 °F)
-5 °C to 125 °C (23 °F to 257 °F)
-30 °C to 125 °C (-22 °F to 257 °F)
Display accuracy
± 0.2 °C entire range ± 0.2 °C entire range ± 0.5 °C at 660 °C
± 0.25 °C
± 0.25 °C
± 0.25 °C
Stability
± 0.01 °C entire range
± 0.03 °C at 350 °C ± 0.05 °C at 660 °C ± 0.03 °C at 200 °C ± 0.015 °C at -5 °C ± 0.03 °C at -25 °C
Heating time
25 min: -25 °C to 150 °C
5 min: 33 °C to 350 °C
15 min: 50 °C to 660 °C
40 min: 25 °C to 200 °C
30 min: 25 °C to 100 °C
35 min: 25 °C to 100 °C
Cooling
15 min:
32 min:
35 min:
35 min:
30 min:
45 min:
time
23 °C to -25 °C
350 °C to 33 °C
660 °C to 50 °C
200 °C to 100 °C
25 °C to 0 °C
25 °C to -25 °C
15
Immersion depth
150 mm (5.9 in)
150 mm (5.9 in)
150 mm (5.9 in)
140 mm (5.5 in)
140 mm (5.5 in)
140 mm (5.5 in)
Size (H x W x D)
290 x 185 x 295 mm (11.4 x 7.3 x 11.6 in)
290 x 185 x 295 mm (11.4 x 7.3 x 11.6 in)
290 x 185 x 295 mm (11.4 x 7.3 x 11.6 in)
140 x 260 x 200 mm (5.5 x 10.38 x 8 in)
180 x 310 x 240 mm (7.2 x 12 x 9.5 in)
230 x 340 x 260 mm (9 x 13.2 x 10.5 in)
Weight
8.16 kg (18 lb)
7.3 kg (16 lb)
7.7 kg (17 lb)
4.5 kg (10 lb)
6.8 kg (15 lb)
9.8 kg (22 lb)
Calibration included
NVLAP accredited
NVLAP accredited
NVLAP accredited
Traceable certification
Traceable certification
Traceable certification
For full specifications visitfluke.com/en-us/product/calibration-tools/temperature-calibrators/fluke-calibration-9142 For full specifications visit fluke.com/en-us/product/calibration-tools/temperature-calibrators/fluke-calibration-6102-7102-7103
Temperature Calibrators
712B
714B
712B RTD Calibrator
· Complete RTD calibration tool · Measure temperature like a thermometer with RTD sensor · Simulate RTD outputs · Rosemount pulsed RTD transmitter compatible · Fourteen types of RTDs supported · Auto step and auto ramp output function · Measure mA while sourcing temperature
714B Thermocouple Calibrator
· Full-featured thermocouple calibration tool
· Measure temperature like a thermometer with a TC sensor
· Simulate TC outputs
· Seventeen types of thermocouples supported
724
· Auto step and auto ramp output function
· Calibrate linear TC transmitter with mV source function
· Measure mA while sourcing temperature
724 Temperature Calibrator
· Expertly test all the temperature sensors and transmitters in your plant · Source and measure TCs and RTDs · Easy-to-read measure/source back lit screens let you view input and output
simultaneously · Perform fast linearity tests with auto step and auto ramp features · Power transmitters with internal loop supply · Store frequently-used test setups for later use
Model
Temperature Calibrators 712B
Measure
V dc
16 Resistance
4000
A dc
24 mA
Temperature: RTDs
14 types
Temperature: TCs
Source/Simulate
V dc
Resistance
4000
Temperature: RTDs
14 types
Temperature: TCs
Features
24 V loop supply
Traceable certification
·
Accessories1
A/B
1Accessories: A. Compatible with LockPak B. Compatible with ToolPak
For full specifications visit www.fluke.com/temperaturecalibrators
714B -10 mV to 75 mV 24 mA 17 types
17 types
· A/B
724
30 V 3200 24 mA 7 types 12 types
10 V 3200 7 types 12 types
· · A/B
Multifunction Process Calibrators
Fluke 725 and 726 Multifunction Process Calibrator
725
726
The Fluke 725 and 726 Multifunction Calibrators are versatile, easy-to-use field calibrators. Use them to test and calibrate almost anything.
· Dual measure/source backlit screens let you view input and output simultaneously
· Perform fast linearity tests with auto-step and ramp · Power transmitters with internal loop supply · Store frequently-used test setups for later use · Measure and source frequency to test sensors and flow
transmitters · Source/simulate mA, TCs and RTDs to calibrate
temperature transmitters · Source and measure pressure using any of the Fluke
pressure modules for testing transmitters and gauges · Source mA with pressure measurement to test valves
and I/Ps
Model Measure V dc Resistance A dc Frequency Pressure Temperature: RTDs Temperature: TCs Source/Simulate V dc Resistance mA dc/% scale mA source; auto step, auto ramp Frequency totalizer Temperature: RTDs Temperature: TCs Record Calibration results
725
30 V 3200 24 mA 10 kHz 50 ranges1 7 types 12 types
10 V 3200 24 mA ·
7 types 12 types
726
30 V 4000 24 mA 15 kHz 50 ranges1 8 types 13 types
20 V 4000 24 mA · 15 kHz 8 types 13 types
Manual
Fluke 726 Precision Multifunction Process Calibrator
The Fluke 726 Precision Multifunction Process Calibrator has all the features of the 725 plus twice the accuracy for unsurpassed calibration power.
· Precise measurement and calibration source
performance, accuracies of 0.01 %
· Voltage input protection design for improved reliability
and reduced cost of ownership
· Transmitter error % calculation, interpret calibration
results without a calculator
· Memory storage for up to eight calibration results,
return stored calibration data from the field
· Frequency totalizer and frequency pulse train source
17
mode for enhanced flowmeter testing
· HART mode inserts 250 ohm resistor in mA measure
with loop power and source
· Integrated pressure switch test captures the set, reset
and deadband of a switch
· Custom RTD curves, add calibration constants for
certified RTD probes for enhanced temperature
measurement
Remote operation
·
·
Features
24 V loop supply
·
·
Traceable certification
·
·
Accessories2
A/B
A/B
1Fluke 750 Pressure Modules required 2Accessories: A. Compatible with LockPak B. Compatible with ToolPak
For full specifications, more product highlights and ordering information visit www.fluke.com/multifunctioncalibrators
Documenting Process Calibrators
753
754
Fluke 750 Series Documenting Process Calibrators
The Fluke 753 and 754 Documenting Process Calibrators are powerful, all-in-one tools designed for process professionals who demand accuracy, efficiency, and versatility in the field. Both models source, simulate, and measure pressure, temperature, and electrical signals, supporting a wide range of calibration tasks without the need for multiple tools. The 754 goes a step further by offering HART communication, enabling you to configure and troubleshoot HART devices in the field. These rugged, portable calibrators simplify workflows by automating calibration procedures and capturing detailed documentation for compliance and traceability — all while saving time and reducing errors.
Fluke 753 Documenting Process Calibrator
18 The 753 Documenting Process Calibrator automates calibration procedures and captures your data. Use the PC interface for downloading procedures, lists, and instructions to the 753 and for uploading data for printing, archiving and analysis.
Combine the 750 Series calibrators with DPCTrack2 software for a complete paperless calibration solution.
Features of the Fluke 753 and 754: · Measure volts, mA, RTDs, thermocouples, frequency,
and ohms to test sensors, transmitters and other instruments · Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters · Power transmitters during test using loop supply with simultaneous mA measurement · Measure/source pressure using any of 50 Fluke pressure modules · Measure and source simultaneously with one compact, rugged, reliable tool · Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results · Use many features like autostep, custom units, user entered values during test, one-point and twopoint switch testing, square root DP flow testing, programmable measurement delay etc · Handling of fast pulsed RTD transmitters and PLCs, with 1 ms response time · English, French, German, Italian, Spanish, Brazilian Portuguese, Simplified Chinese, Korean and Russian languages · Three-year warranty
Fluke 754 Documenting Process Calibrator
The 754 includes integrated HART communication capability. This rugged, reliable tool is ideal for calibrating, maintaining, and troubleshooting HART and other instrumentation. Additional 754 features:
· Monitor, control and calibrate HART instrumentation · Interrogate HART devices to determine type,
manufacturer, model and tag-ID · Read HART PV, smart transmitter digital output · Make field adjustments to ranging, damping and more · Change/assign the HART transmitter tag · Re-configure HART temperature sensor (e.g., TC to RTD) · Perform HART sensor trim and output trim · Perform HART loop test · Control selected Fluke Calibration Dry Wells and Baths
Wells
The 754 supports these classes of HART instructions: · Universal commands–such as “read manufacturer
and device type,” “read primary variable (PV),” or “read current output and percent of span” · Common practice commands–such as “read multiple variables,” “set damping time,” or “loop test” · Device-specific commands on supported transmitters– functions unique to a particular field device, like “sensor trim”
For full specifications visit fluke.com/documentingprocesscalibrators
750 Series Pressure Calibration Modules
Fluke Pressure Modules
Now with more measurement ranges, improved accuracy and easy pressure connectivity. Fluke offers 50 different pressure modules for use with its pressure, multifunction and documenting process calibrators. Fluke process calibrators in this guide marked with the “Pressure Enabled” symbol display readings from these Precision 750 Series Pressure Modules. Each pressure module includes traceable certification, metric adapter and instruction sheet. A full range of differential, gage, absolute, vacuum, dual and intrinsically safe pressure modules are available, from -15 psi (-103 kPa) to 10,000 psi (69 MPa).
Model
Parameter/Range
Differential
750P00 750P3IN 750P5IN 750P016 750P02
0 to 1 in H2O (0 to 2.5 mBar) 0 to 3 Inch H2O (0 to 7.5 mBar) 0 to 5 Inch H2O (0 to 12.5 mBar) 0 to 10 in H2O (0 to 25 mBar) 0 to 1 psi (0 to 70 mBar)
750P22 0 to 1 psi (0 to 70 mBar)
750P03 0 to 5 psi (0 to 350 mBar)
750P23 0 to 5 psi (0 to 350 mBar)
750P04 0 to 15 psi (0 to 1 bar)
750P246 0 to 15 psi (0 to 1 bar)
Gage
750P056 0 to 30 psi (0 to 2 bar)
750P066 0 to 100 psi (0 to 7 bar)
750P276 0 to 300 psi (0 to 20 bar)
750P07 0 to 500 psi (0 to 35 bar)
750P08 0 to 1000 psi (0 to 70 bar)
750P096 0 to 1500 psi (0 to 100 bar)
750P2000 0 to 2000 psi (0 to 140 bar)
High
750P296 0 to 3000 psi (0 to 200 bar)
750P30 0 to 5000 psi(0 to 340 bar)
750P31 0 to 10000 psi (0 to 700 bar)
Hi Side Media2
Lo Side Media2
Reference Total Uncertainty Uncertainty4 1-year (15-35 °C)
Total Uncertainty 1-year1
Total Uncertainty 6-month (15-35 °C)
Dry Air Dry Air Dry Air Dry Air Dry Air 316 SS Dry Air 316 SS Dry Air 316 SS
Dry Air Dry Air Dry Air Dry Air Dry Air Dry Air Dry Air Dry Air Dry Air Dry Air
± 0.15 % ± 0.15 % ± 0.15 % ± 0.1 % ± 0.050 % ± 0.050 % ± 0.02 % ± 0.02 % ± 0.0175 % ± 0.0175 %
± 0.3 % ± 0.3 % ± 0.3 % ± 0.2 % ± 0.1 % ± 0.1 % ± 0.04 % ± 0.04 % ± 0.035 % ± 0.035 %
± 0.35 % ± 0.35 % ± 0.35 % ± 0.3 % ± 0.15 % ± 0.15 % ± 0.05 % ± 0.05 % ± 0.045 % ± 0.045 %
± 0.25 % ± 0.25 % ± 0.25 % ± 0.15 % ± 0.075 % ± 0.075 % ± 0.035 % ± 0.035 % ± 0.03 % ± 0.03 %
316 SS N/A
± 0.0175 %
± 0.035 %
± 0.045 %
± 0.03 %
316 SS N/A
± 0.0175 %
± 0.035 %
± 0.045 %
± 0.03 %
316 SS N/A
± 0.0175 %
± 0.035 %
± 0.045 %
± 0.03 %
19
316 SS N/A
± 0.0175 %
± 0.035 %
± 0.045 %
± 0.03 %
316 SS N/A
± 0.0175 %
± 0.035 %
± 0.045 %
± 0.03 %
316 SS N/A
± 0.0175 %
± 0.035 %
± 0.045 %
± 0.03 %
316 SS N/A
± 0.0175 %
± 0.035 %
± 0.045 %
± 0.03 %
316 SS N/A 316 SS N/A 316 SS N/A
± 0.0175 % ± 0.0175 % ± 0.0175 %
± 0.035 % ± 0.035 % ± 0.035 %
± 0.045 % ± 0.045 % ± 0.045 %
± 0.03 % ± 0.03 % ± 0.03 %
Fluke Process Calibrators in this guide displaying this symbol are Pressure Enabled units and display readings from these Precision 750 Series Pressure Modules. Each pressure module includes traceable certification, metric NPT and M20 adapter and instruction sheet.
For full specifications visit fluke.com/en-us/product/calibration-tools/pressure-calibrators/fluke-750p
Model
Parameter/Range
Hi Side Media2
Lo Side Reference Media2 Uncertainty4
Total Uncertainty 1-year (15 °C to 35 °C)
Total Uncertainty 1-year1
Total Uncertainty 6-month (15 °C to 35 °C)
Absolute
750PA3
0 to 5 psia (0 to 350 mBar)
316 SS N/A
± 0.03 %
± 0.06 %
± 0.07 %
± 0.05 %
750PA46 0 to 15 psia (0 to 1 bar)
316 SS N/A
± 0.03 %
± 0.06 %
± 0.07 %
± 0.05 %
750PA5
0 to 30 psia (0 to 2 bar)
316 SS N/A
± 0.03 %
± 0.06 %
± 0.07 %
± 0.05 %
750PA6
0 to 100 psia (0 to 7 bar)
316 SS N/A
± 0.03 %
± 0.06 %
± 0.07 %
± 0.05 %
750PA27 0 to 300 psia (0 to 20 bar)
316 SS N/A
± 0.03 %
± 0.06 %
± 0.07 %
± 0.05 %
750PA7
0 to 500 psia (0 to 35 bar)
316 SS N/A
± 0.03 %
± 0.06 %
± 0.07 %
± 0.05 %
750PA8
0 to 1000 psia (0 to 70 bar)
316 SS N/A
± 0.03 %
± 0.06 %
± 0.07 %
± 0.05 %
750PA9
0 to 1500 psia (0 to 100 bar)
316 SS N/A
± 0.03 %
± 0.06 %
± 0.07 %
± 0.05 %
Vacuum
750PV3
-5 psi (-350 mBar)
316 SS Dry Air ± 0.03 %
± 0.06 %
± 0.07 %
± 0.05 %
750PV4
-15 psi (-1 bar)
316 SS Dry Air ± 0.03 %
± 0.06 %
± 0.07 %
± 0.05 %
Dual
750PD2
-1 to 1 psi (-70 to 70 mBar)
316 SS Dry Air ± 0.05 %
± 0.1 %
± 0.15 %
± 0.075 %
750PD3
-5 to 5 psi (-350 to 350 mBar)
316 SS Dry Air ± 0.03 %
± 0.06 %
± 0.07 %
± 0.05 %
750PD10 -10 to 10 psi (-700 to 700 mBar) 316 SS Dry Air ± 0.025 %
± 0.05 %
± 0.07 %
± 0.04 %
750PD4
-15 to 15 psi (-1 to 1 bar)
316 SS Dry Air ± 0.0175 %
± 0.035 %
± 0.045 %
± 0.03 %
750PD5
-15 to 30 psi (-1 to 2 bar)
316 SS N/A
± 0.0175 %
± 0.035 %
± 0.045 %
± 0.03 %
750PD50 -15 to 50 psi (-1 to 3.5 bar)
316 SS N/A
± 0.0175 %
± 0.035 %
± 0.045 %
± 0.03 %
750PD6
-15 to 100 psi (-1 to 7 bar)
316 SS N/A
± 0.0175 %
± 0.035 %
± 0.045 %
± 0.03 %
750PD7
-15 to 200 psi (-1 to 14 bar)
316 SS N/A
± 0.0175 %
± 0.035 %
± 0.045 %
± 0.03 %
750PD27 -15 to 300 psi (-1 to 20 bar)
316 SS N/A
± 0.0175 %
± 0.035 %
± 0.045 %
± 0.03 %
Reference
750R045 0 to 15 psi (0 to 1 bar)
Dry Air Dry Air ± 0.01% of FS ± 0.02 % of FS
± 0.04% of FS ± 0.015 % of FS
750R065 0 to 100 psi (0 to 7 bar)
316 SS N/A
± 0.01% of FS ± 0.02 % of FS
± 0.04% of FS ± 0.015 % of FS
20 750R27
750R07
0 to 300 psi (0 to 20 bar) 0 to 500 psi (0 to 35 bar)
316 SS N/A 316 SS N/A
± 0.01 % of FS ± 0.01 % of FS
± 0.02 % of FS ± 0.02 % of FS
± 0.04 % of FS ± 0.04 % of FS
± 0.015 % of FS ± 0.015 % of FS
750R085 0 to 1000 psi (0 to 70 bar)
316 SS N/A
± 0.01% of FS ± 0.02 % of FS
± 0.04% of FS ± 0.015 % of FS
750R29
0 to 3000 psi (0 to 200 bar)
316 SS N/A
± 0.01% of FS ± 0.02 % of FS
± 0.04% of FS ± 0.015 % of FS
750R30
0 to 5000 psi (0 to 340 bar)
316 SS N/A
± 0.01% of FS ± 0.02 % of FS
± 0.04% of FS ± 0.015 % of FS
750R315 0 to 10000 psi (0 to 700 bar)
316 SS N/A
± 0.01% of FS ± 0.02 % of FS
± 0.04% of FS ± 0.015 % of FS
750RD5 -15 to 30 psi (-1 to 2 bar)
Dry Air N/A
± 0.01% of FS ± 0.02 % of FS
± 0.04% of FS ± 0.015 % of FS
750RD65 -12 to 100 psi (-1 to 7 bar)
316 SS N/A
± 0.01% of FS ± 0.02 % of FS
± 0.04% of FS ± 0.015 % of FS
750RD27 -12 to 300 psi (-0.8 to 20 bar)
316 SS
N/A
± 0.01% of FS ± 0.02 % of FS
± 0.04% of FS ± 0.015 % of FS
1. Total uncertainty, % of full span for temperature range 0 °C to +50 °C, one year interval. Total uncertainty, 1.0% of full span for temperature range -10 °C to 0 °C, one year interval. No 6 month specification available for range -10 °C to 0 °C.
2. “NONCORROSIVE GASSES” indicates dry air or non-corrosive gas as compatible media. “Stainless Steel 316-SS” indicates media compatible with Type 316 Stainless Steel. 3. Specifications % of Full Span unless otherwise noted. 4. Reference Uncertainty is the specification for as left data for 24 hours. 5. When reference class modules are used with fixed resolution products (717, 718, 719 series, 725 and 726) calibrators add ± 1 count to the overall accuracy specification. 6. Intrinsically Safe pressure module available in this pressure range.
For full specifications visit fluke.com/en-us/product/calibration-tools/pressure-calibrators/fluke-750p
Intrinsically Safe Products
Fluke 700G Series Pressure Gauge (see page 8)
Fluke 750PEx Pressure Modules
Fluke 718Ex Pressure Calibrator
Fluke 721Ex Pressure Calibrator
Model
750PEx
718Ex
721Ex
Measure
A dc Pressure
24 mA 30 psi to 300 psi1
24 mA 14 ranges
Temperature: RTDs
PT100 385
Record Min/Max
·
·
Hold
·
Features
Integrated hand pressure pump
·
Traceable certification
·
Intrinsically safe certifications
ATEX
Ex ia IIC T4 Ga
II 1 G Ex ia IIC T4
II 2 G Ex ia IIB T3 Gb (Ta= -10… +45 °C)
IECEx
II 2 G Ex ia IIB T3 Gb
(Ta= -10… +45 °C)
21
North American Certification
CSA CIass I, Division 1, I.S. Class I, Div 1,
Groups ABCD, T4,Ga
Groups A-D T4
Class 1, Division 1, Groups CD, T3
1Either the internal sensor or a Fluke 750PEx Pressure Module may be used
2Fluke 750PEx Pressure Module required
For full specifications visit fluke.com/en-us/product/intrinsically-safe/fluke-718ex For full specifications visit fluke.com/en-us/product/calibration-tools/pressure-calibrators/fluke-721ex
750SW DPCTrack2TM Software
Fluke DPCTrack 2TM is an easy-to-use, singleuser, entry-level instrumentation manager. For more sophisticated software, you may wish to investigate products from one of Fluke’s software partners below.
These Fluke Process Calibration software partners provide differentiated solutions with connectability to Fluke 729, 729Pro, 753 and 754 Documenting Process Calibrators.
750SW DPCTrack2TM Software
DPCTrack2 Software is a specialized database that can help you manage your instrumentation and address the documentation requirements of quality programs and regulations. With DPCTrack2TM and a 729/729Pro or 753/754 DPC you can: · Manage your inventory of tags and instruments,
schedule for calibration · Create tag specific procedures with instructions and comment · Load those procedures to your DPC, and later upload
the results to your PC · Select and execute automated as found/as left procedures in the field,
automatically capturing results · Examine the calibration histories of your tags and instruments and print
reports · Import legacy DPC/TRACK data 22 The 729, 729Pro, 753 and 754 includes DPCTrack2TM 60-day trial software.
Special offer The DPCTrack2 and Fluke 754 have been combined to provide a complete paperless calibration solution. The Fluke-754/750SW BU, bundle is now available for great savings.
For full specifications visit fluke.com/dpctrack
Meridium
PRM (Plant Resource Manager) from Yokogawa
Electric Corporation.
AMS from Emerson Process Management, (formerly Fisher-Rosemount).
On Time Support
Fluke 154 HART Communicator
HART Calibration assistance
at your fingertips
The Fluke 154 is a standalone tablet based HART® communication tool. The tablet configured with the “FlukeHART” mobile app utilizes a wireless HART modem that connects directly to the HART transmitter being tested or configured. When you combine your Fluke 154 Communicator with a Fluke 750 Series Documenting Process Calibrator, or a 720 Series Multifunction Process Calibrator you have a complete HART calibration and configuration solution.
· Full HART Device Description (DD) support of all HART devices
· Configure HART devices · Perform HART trim on HART devices when used with a
Fluke 750 or 720 series calibrator · Monitor device PV, SV, TV, QV and other measured
HART variables · Convenient wireless connectivity to HART modem · Easy to use, fast connect and view HART data · Store HART device configurations · Long range wireless communication up to 250 feet
Tablet
Operating system
Android 5.0 or newer
Processor
ARM or Atom
Memory RAM
1 GB
Memory ROM
2 GB
Screen
960×540 qHD
Communication port
Bluetooth
23
HART Modem Enclosure
Material
High strength ABS Plastic
Dimensions
10.16 x 2.5 x 6.9 cm (4 x 1 x 2.75 in)
Total unit weight
0.16 kg (0.36 lbs)
HART Interface
Interface
Capacitive coupling
Output
600 mVpp
Leakage
< 10 uA
Connections
Across loop resistor or HART field device
Specifications
HART 4, HART 5, HART 6, HART 7
HART physical layer spec
HCF_SPEC-54
For full specifications visit fluke.com/en-us/product/calibration-tools/multifunction-calibrators/fluke-154
Pressure Accessories, Batteries
700HTP-2
700PTP-1
700LTP-1
700PTPK2
C799 Soft Field Case
700TTH5K
Fluke Fluke 700HTP-2 Hydraulic Test Pump
700HTPK2 Premium Hydraulic Test Pump Kit
The Fluke Fluke 700HTP-2 is designed to generate pres- Adds premium hose kits to the standard sures up to 10,000 psi/ 700 bar. Use the Fluke 700PRV-1 700HTPK. Includes “finger tight” no tools required adjustable relief valves to limit pressures from 1360 psi connectors to connect both a gauge or pressure to 5450 psi. Use the Fluke 700HTP-2 test hose to connect module and connection to a transmitter.
from the pump to the device under test.
700TTH5K and 700TTH10K Premium Transmitter
Fluke 700PTP-1 Pneumatic Test Pump The Fluke 700PTP-1 is a handheld pressure pump designed to generate either vacuum to -11.6 psi/-0.8 bar or pressure to 600 psi/40 bar.
Fluke-700LTP-1 Low Pressure Test Pump Hand operated pressure pump designed to generate either vacuum to -13 psi/-.90 bar or pressures to 100 psi/6.9 bar.
BP7240 Li-ion Battery
Test hose kits. 5,000 and 10,000 psi models. Included 1/4″ NPT connection for permanent mount to test pump and no tools required 1/4″ NPT male connector for connection to a transmitter.
700M20TH Premium Transmitter Test hose kit 5,000 psi rating. Includes 1/8″ NPT connection for permanent mount to a calibrator or test pump and male no tools required connector for connection to FemalevM20 connections.
Spare battery for 75X calibrators. Have the power 700MTH Premium Transmitter Test hose kit
to easily run the calibrator for a full day’s work. (for 5,000 psi rating. Includes 1/8″ NPT connection for
74X calibrators use BP7235 NiMH Battery)
permanent mount to a calibrator or test pump and
C799 Soft Field Case
no tools required male 1/4″ metric, BSP connector.
Large fabric carrying case. Cutouts to hold one document-
ing process calibrator, one Fluke Pressure Module, one
BC7240 Battery Charger, one spare BP7240 Battery Pack,
and test leads.
Fluke 700TC1 and 700TC2 Thermocouple plug kits Thermocouple connector kits to connect from Fluke Thermocouple calibrators to temperature transmitters.
700PTPK2 Premium Pneumatic Test Pump Kit Adds premium hose kits to the standard 700PTPK. Includes “finger tight” no tools required connectors to connect both a gauge and connection to a transmitter.
fluke.com
©1994-2015, 2025 Fluke Corporation. Specifications subject to change without notice. 250459-en
Modification of this document is not permitted without written permission from Fluke Corporation.
Documents / Resources
 |
FLUKE 709H Precision Current Loop Calibrators [pdf] Instruction Manual 709-709H, 710, 709H Precision Current Loop Calibrators, 709H, Precision Current Loop Calibrators, Current Loop Calibrators, Loop Calibrators, Calibrators |