Sophi
Tables
Product Guide
Sophi Tables
An elegantly designed modular table system
for private office, benching, boardroom and meeting spaces.
Sophi features die cast aluminum legs in a beautiful chrome finish connected to a modular aluminum frame.
How To Specify Sophi Tables
There are four items to consider when specifying a Sophi Table:
Table Code/ Corner Detail / Surface Finish / Electrical Knockout Position and Size
The example below illustrates a table that is 48” x 120” long with Square corners. Silverwood Thermofused laminate has been chosen for the surface finish. This particular table size will allow for two electrical modules.
In this case, the “A” sized knockout in both positions is required.
Example Sophi Table Specification:
Please Note: Electrical Modules Must Be Ordered Separately
Corner Detail
Sophi can be ordered with either Square or 2.5” Radiused corners on the surface.
If Radiused Corners are required, please add $110 List.
Finishes
Please see https://www.fluidconcepts.ca/Furniture-Finishes-s/46.htm
Example Sophi Table Specification:
Note: For Radiused Corners, please add $100 list.
Example Sophi Table Specification:
Electrical Module Knockout Position and Size
When specifying table which requires an Electrical Module, the knockout position and size must be indicated.
Since one table can have multiple positions or knockout sizes (see triple surface table), each location must be specified.
As an example, SOP48120/S/SW/1A/2A is a 48” x 120” table with Square corners, Silverwood laminate with a knockout for a XEM2 in each position.
 |
 |
 |
No Knockout Required ? |
| Knockout Size Code: A (Not available in Position 4) |
Knockout Size Code: B (Not available in Position 4) |
Knockout Size Code: C (Only available in Position 4) |
No Knockout Code: NK |
Single Surface Tables
Double Surface Tables 
Example Sophi Table Specification:
Please Note: Electrical Modules Must Be Ordered Separately
Triple Surface Tables
Additional Details
All TFL and HPL surfaces are 1” thick.
3mm thick edge trim on all outer edges. Where two surfaces meet, the edge is .5mm thick.
Unless otherwise specified, edge trim will match surface color.
Frames provide 3/4” of leveling height.
Four Legs – One Surface
Rectangular Tables
What’s Included:
Table Frame with Surface. All Necessary Hardware.
Electrical Modules Must Be Ordered Separately.
If Radiused Corners are required, please add $100 List.
Finish Options:
Please see www.fluidgroup.com/finishes for finish details
Information Required to Order:
Table Code/ Corner Detail/ Surface Finish/ Knockout Position and Size.
| List | List | ||
| Product Code | Product Description | TFL | HPL |
| SOP3648 | 36″D x 48″W Sophi Table, Rectangular Surface | ||
| SOP3654 | 36″D x 54″W Sophi Table, Rectangular Surface | ||
| SOP3660 | 36″D x 60″W Sophi Table, Rectangular Surface | ||
| SOP3666 | 36″D x 66″W Sophi Table, Rectangular Surface | ||
| SOP3672 | 36″D x 72″W Sophi Table, Rectangular Surface | ||
| SOP3678 | 36″D x 78″W Sophi Table, Rectangular Surface | ||
| SOP3684 | 36″D x 84″W Sophi Table, Rectangular Surface | ||
| SOP3696 | 36″D x 96″W Sophi Table, Rectangular Surface | ||
| SOP4248 | 42″D x 48″W Sophi Table, Rectangular Surface | ||
| SOP4254 | 42″D x 54″W Sophi Table, Rectangular Surface | ||
| SOP4260 | 42″D x 60″W Sophi Table, Rectangular Surface | ||
| SOP4266 | 42″D x 66″W Sophi Table, Rectangular Surface | ||
| SOP4272 | 42″D x 72″W Sophi Table, Rectangular Surface | ||
| SOP4278 | 42″D x 78″W Sophi Table, Rectangular Surface | ||
| SOP4284 | 42″D x 84″W Sophi Table, Rectangular Surface | ||
| SOP4296 | 42″D x 96″W Sophi Table, Rectangular Surface | ||
| SOP4854 | 48″D x 54″W Sophi Table, Rectangular Surface | ||
| SOP4860 | 48″D x 60″W Sophi Table, Rectangular Surface | ||
| SOP4866 | 48″D x 66″W Sophi Table, Rectangular Surface | ||
| SOP4872 | 48″D x 72″W Sophi Table, Rectangular Surface | ||
| SOP4878 | 48″D x 78″W Sophi Table, Rectangular Surface | ||
| SOP4884 | 48″D x 84″W Sophi Table, Rectangular Surface | ||
| SOP4896 | 48″D x 96″W Sophi Table, Rectangular Surface |
Knockout Position and Size
 |
 |
No Knockout Required ? |
| Knockout Size Code: A | Knockout Size Code: B | No Knockout Code: NK |
Table Specification Example:
SOP3660/S/CG/1NK
(36×60 Sophi Table/ Square Corners/ Concrete Grooves Thermofused Laminate/ No Knockout Position 1)
***Electrical Modules Must Be Ordered Separately
Six Legs – Two Surfaces
Rectangular Tables 
What’s Included:
Table Frame with Surface. All Necessary Hardware.
Electrical Modules Must Be Ordered Separately.
If Radiused Corners are required, please add $100 List.
Finish Options:
Please see www.fluidgroup.com/finishes for finish details
Information Required to Order:
Table Code/ Corner Detail/ Surface Finish/ Knockout Position and Size.
| List | List | ||
| Product Code | Product Description | TFL | HPL |
| SOP36108 | 36″D x 108″W Sophi Table, Rectangular Surface | ||
| SOP36120 | 36″D x 120″W Sophi Table, Rectangular Surface | ||
| SOP42108 | 42″D x 108″W Sophi Table, Rectangular Surface | ||
| SOP42120 | 42″D x 120″W Sophi Table, Rectangular Surface | ||
| SOP48108 | 48″D x 108″W Sophi Table, Rectangular Surface | ||
| SOP48120 | 48″D x 120″W Sophi Table, Rectangular Surface | ||
| SOP48132 | 48″D x 132″W Sophi Table, Rectangular Surface | ||
| SOP48144 | 48″D x 144″W Sophi Table, Rectangular Surface | ||
| SOP48156 | 48″D x 156″W Sophi Table, Rectangular Surface | ||
| SOP48168 | 48″D x 168″W Sophi Table, Rectangular Surface | ||
| SOP48180 | 48″D x 180″W Sophi Table, Rectangular Surface | ||
| SOP54144 | 54″D x 144″W Sophi Table, Rectangular Surface | ||
| SOP54168 | 54″D x 168″W Sophi Table, Rectangular Surface | ||
| SOP60144 | 60″D x 144″W Sophi Table, Rectangular Surface | ||
| SOP60168 | 60″D x 168″W Sophi Table, Rectangular Surface |
Knockout Position and Size
 |
 |
No Knockout Required ? |
| Knockout Size Code: A | Knockout Size Code: B | No Knockout Code: NK |
Table Specification Examples:
SOP48120/R/CG/1NK/2B
(48×120 Sophi Table/ Radiused Corners/ Concrete Grooves Thermofused Laminate/ No Knockout Position 1/ XECV Knockout Position 2)
***Electrical Modules Must Be Ordered Separately
Eight Legs – Three Surfaces
Rectangular Tables 
What’s Included:
Table Frame with Surface. All Necessary Hardware.
Electrical Modules Must Be Ordered Separately.
If Radiused Corners are required, please add $100 List.
Finish Options:
Please see www.fluidgroup.com/finishes for finish details
Information Required to Order:
Table Code/ Corner Detail/ Surface Finish/ Knockout Position and Size.
| List | List | ||
| Product Code | Product Description | TFL | HPL |
| SOP48192 | 48″D x 192″W Sophi Table, Rectangular Surface | ||
| SOP54192 | 54″D x 192″W Sophi Table, Rectangular Surface | ||
| SOP54216 | 54″D x 216″W Sophi Table, Rectangular Surface | ||
| SOP54240 | 54″D x 240″W Sophi Table, Rectangular Surface | ||
| SOP60192 | 60″D x 192″W Sophi Table, Rectangular Surface | ||
| SOP60216 | 60″D x 216″W Sophi Table, Rectangular Surface | ||
| SOP60240 | 60″D x 240″W Sophi Table, Rectangular Surface |
Knockout Position and Size
 |
 |
No Knockout Required ? |
| Knockout Size Code: A | Knockout Size Code: B | No Knockout Code: NK |
Table Specification Examples:
SOP54192/S/CG/1NK/2B/3NK
(54×192 Sophi Table/ Square Corners/ Concrete Grooves Thermofused Laminate/ No Knockout Position 1/ XECV Knockout Position 2/ No Knockout Position 3)
***Electrical Modules Must Be Ordered Separately
Round Tables
Three Legs
What’s Included:
Table Frame with Surface. All Necessary Hardware.
Electrical Modules Must Be Ordered Separately.
Finish Options:
Please see www.fluidgroup.com/finishes for finish details
Information Required to Order:
Table Code/ Surface Finish/ Knockout Position and Size.
| List | List | ||
| Product Code | Product Description | TFL | HPL |
| SOP3R36 | 36″ Dia Sophi Table, 3 Leg, Round Surface | ||
| SOP3R42 | 42″ Dia Sophi Table, 3 Leg, Round Surface | ||
| SOP3R48 | 48″ Dia Sophi Table, 3 Leg, Round Surface | ||
| SOP3R54 | 54″ Dia Sophi Table, 3 Leg, Round Surface | ||
| SOP3R60 | 60″ Dia Sophi Table, 3 Leg, Round Surface |
Round Tables
Four Legs
What’s Included:
Table Frame with Surface. All Necessary Hardware.
Electrical Modules Must Be Ordered Separately.
Finish Options:
Please see www.fluidgroup.com/finishes for finish details
Information Required to Order:
Table Code/ Surface Finish/ Knockout Position and Size.
| List | List | ||
| Product Code | Product Description | TFL | HPL |
| SOP4R36 | 36″ Dia Sophi Table, 4 Leg, Round Surface | ||
| SOP4R42 | 42″ Dia Sophi Table, 4 Leg, Round Surface | ||
| SOP4R48 | 48″ Dia Sophi Table, 4 Leg, Round Surface | ||
| SOP4R54 | 54″ Dia Sophi Table, 4 Leg, Round Surface | ||
| SOP4R60 | 60″ Dia Sophi Table, 4 Leg, Round Surface |
Knockout Position and Size
 |
No Knockout Required ? |
| Knockout Size Code: C | No Knockout Code: NK |
Table Specification Examples:
SOP3R42/GT/4C
(42 Round, 3 Leg Sophi Table/ Ginger Thermofused Laminate/ XNOD Knockout Position 4)
SOP4R60/HPST/4NK
(60 Round, 4 Leg Sophi Table/ Stainless High Pressure Laminate/ No Knockout Position 4)
***Electrical Modules Must Be Ordered Separately
Square Tables
Four Legs 
What’s Included:
Table Frame with Surface. All Necessary Hardware.
Electrical Modules Must Be Ordered Separately.
If Radiused Corners are required, please add $100 List.
Finish Options:
Please see www.fluidgroup.com/finishes for finish details
Information Required to Order:
Table Code/ Corner Detail/ Surface Finish/ Knockout Position and Size.
| List | List | ||
| Product Code | Product Description | TFL | HPL |
| SOP3636 | 36″D x 36″W Sophi Table, Square Surface | ||
| SOP4242 | 42″D x 42″W Sophi Table, Square Surface | ||
| SOP4848 | 48″D x 48″W Sophi Table, Square Surface | ||
| SOP5454 | 54″D x 54″W Sophi Table, Square Surface | ||
| SOP6060 | 60″D x 60″W Sophi Table, Square Surface |
Knockout Position and Size
 |
No Knockout Required ? |
| Knockout Size Code: C | No Knockout Code: NK |
Table Specification Examples:
SOP3636/S/BW/4C
(36 Square Sophi Table/ Square Corners/ Blackwood Thermofused Laminate/ XNOD Knockout Position 4)
***Electrical Modules Must Be Ordered Separately
Electrical
XEM2
Double Sided Electrical Module
What’s Included:
Electrical Module. All Necessary Hardware
Finish Options:
ANO – Anodized, WH – White, B – Black
Information Required to Order:
Electrical Module Code / Finish. Example: XEM2B/ANO
Notes: For Information Regarding Electrical Module Position, Please see Page 6.
XEM2 is Available in Positions 1,2, and 3.
| Product Code | Product Description | List |
| XEM2A | Double Sided Electrical Module, 4pwr Per Side, 120″ Cord | |
| XEM2B | Double Sided Electrical Module, 2pwr 2USB Per Side, 120″ Cord |
XECV
Large Electrical Module
What’s Included:
Electrical Module. All Necessary Hardware
Finish Options:
Only Available in Silver/Black
Information Required to Order:
Electrical Module Code. Example: XECVA
Notes: For Information Regarding Electrical Module Position, Please see Page 6.
XECV is Available in Positions 1,2, and 3.
| Product Code | Product Description | List |
| XECVA | Large Electrical Module, 1VGA, 1HDMI, 3pwr, 2data, 120″ Cord | |
| XECVB | Large Electrical Module, 1VGA, 1HDMI, 1data USB, 2audio(3.5mm), 3pwr, 2data, 120″ Cord |
XNOD
Round Electrical Module 
What’s Included:
Electrical Module. All Necessary Hardware
Finish Options:
WH – White, B – Black
Information Required to Order:
Electrical Module Code / Finish. Example: XNODB/WH
Notes: For Information Regarding Electrical Module Position, Please see Page 6.
XNOD is Available in Position 4.
| Product Code | Product Description | List |
| XNODA | Plug in Electrical Module, Round, 2 power | |
| XNODB | Plug in Electrical Module, Round, 1 power/2 USB |
XWGLP
Low Profile Wire Manager
What’s Included:
Low Profile Wire Manager, All Necessary Hardware.
Finish Options:
Not Applicable. Light Grey Only
Information Required to Order:
Low Profile Wire Manager Code. Example: XWGLP60
| Product Code | Product Description | List |
| XWGLP48 | 48″ Low Profile Wire Manager | |
| XWGLP54 | 54″ Low Profile Wire Manager | |
| XWGLP60 | 60″ Low Profile Wire Manager | |
| XWGLP66 | 66″ Low Profile Wire Manager | |
| XWGLP72 | 72″ Low Profile Wire Manager |
XSPN
Spine Wire Manager
What’s Included:
Spine Wire Manager. All Necessary Hardware.
Finish Options:
Not Applicable. Grey Only
Information Required to Order:
Spine Wire Manager Code. Example: XSPN28
| Product Code | Product Description |
| XSPN28 | 28” Spine Wire Manager |
How to Order – Please send all purchase orders to order@fluidgroup.com or fax to 1.866.769.6057.
Questions – Call us toll free at 1.866.933.5258.
Please see www.fluidgroup.com for all information including:
- Terms & conditions
- Warranty information
- Local representation information
- Finishes & Resources
Thank-you for choosing fluidconcepts!
fluidconcepts & design inc.
96 Planchet Rd.
Concord Ontario Canada
L4K 2C7
TF. 1.866.933.5258
Fax. 1.866.789.6057
www.fluidgroup.com
order@fluidgroup.com
www.fluidgroup.com
Documents / Resources
 |
fluid concepts Sophi Tables [pdf] User Guide Sophi Tables, Tables |