Danfoss CDP,BBT Terminal Space Adaptor
Specifications
- Model: Terminal space adaptor for UL 508E conformity CDP-, BBT-
- Standards: IEC 60947; EN 60947 UL 508; CSA 22.2 Part 14
- Part Number: 037C3005
- IC Number: IC.PI.C00.F2.02
Product Usage Instructions
Installation:
- Attention: To prevent electrical shock, disconnect from power source before installing or servicing.
- Install the terminal space adaptor in a suitable enclosure to ensure proper protection.
- Keep the adaptor free from contaminants for optimal performance.
- IEC 60947; EN 60947
- UL 508; CSA 22.2 Part 14
Usage Guidelines:
Follow these steps to use the terminal space adaptor effectively:
- Ensure the power source is disconnected before making any connections.
- Connect the appropriate cables to the adaptor following the manufacturer’s guidelines.
- Securely fasten the connections to prevent any loose connections or short circuits.
- After installation, perform a thorough check to verify proper functioning.
FAQ
Q: Can this terminal space adaptor be used in outdoor environments?
A: The terminal space adaptor is designed for indoor use in suitable enclosures. It is not recommended for outdoor environments.
Q: What is the voltage rating of this terminal space adaptor?
A: The voltage rating may vary based on the specific model. Refer to the product specifications or consult the manufacturer for detailed information on voltage ratings.
Documents / Resources
 |
Danfoss CDP,BBT Terminal Space Adaptor [pdf] Installation Guide CDP-, BBT-, CDP BBT Terminal Space Adaptor, CDP BBT, Terminal Space Adaptor, Space Adaptor |