cudy WR300 Multi Mode WiFi Router
Product Information
Specifications
- Model: 810600216
- Power System Indicator: LED
- WAN Port: Ethernet
- Network Protocol: Wi-Fi
Product Instructions
- Connect the power adapter to the router and wait for the Power system indicator light to turn solid on.
- Connect the router’s WAN port to the DSL/Cable Modem or the Ethernet wall outlet.
- Connect the router via Wi-Fi by following method A or B:
- Connect your device to the router’s Wi-Fi network. The default network name/SSID and Password are printed on the bottom of the router.
- Consult the user manual for detailed instructions on alternative connection methods.
FAQ
- Q: Where can I find additional technical support?
- A: For further technical assistance, visit www.cudy.com/support or contact support@cudy.com.
- Q: What should I do if the Power system indicator light does not turn on?
- A: Check the power connection and ensure that the power adapter is properly plugged into the router and a working power source.
Usage Instructions
- Connect the power adapter to the router and wait for the Power system indicator light to turn solid on.
- Connect the router’s WAN port to DSL/Cable Modem or the Ethernet wall outlet.
- Connect the router via A or B method.
- A Wi-Fi: Connect your device to the router’s Wi-Fi.
(the default network name/SSID and Password are printed on the bottom of the router.)
Flip the page to continue… - B Wired: Turn off the Wi-Fi on your device and connect it to the router’s LAN port via an Ethernet cable.
- Open a browser and follow the pictures to configure the router.
Enjoy the internet
CONTACT
NEED TECH HELP?
Documents / Resources
 |
cudy WR300 Multi Mode WiFi Router [pdf] Installation Guide WR300 REV1.0, WR300 Multi Mode WiFi Router, WR300 WiFi Router, Multi Mode WiFi Router, WR300 Router, WiFi Router, WR300, Router |