User Guide
About this Document
This document provides installation instructions for the Cisco Virtualized Voice Browser ES 01, and a list of issues resolved by this ES. Please review all sections in this document about installation before installing the product. Failure to install this ES as described may result in inconsistent behavior of VVB.
Supported VVB Version
ES 01 (ciscovb.1252.ES01.cop.sgn) is to be installed on VVB Version 12.5(1)_SU using CLI only. Installing the ES on previous ESs will not create any repercussions.
Resolved Caveats
The details of the defects that are fixed in this ES are mentioned below:
Cisco VVB 12.5(1)_SU ES01 | |
Bug ID | Description |
CSCwd21338 | VVB not sending audio to Google while DTMF is entered |
Conditions for Installing ES
Pre-Conditions
Make sure there is no previous ES installation in progress. Else, cancel it by running:
utils system upgrade cancel
Post-Conditions
Reboot the Cisco VVB after the ES is applied.
After reboot, verify from the Cisco VVB Appadmin that all the services come to In-Service.
Dependencies for this ES
NA
Installing ES
This ES must be installed using CLI only, by running:
utils system upgrade initiate
Follow the instructions and provide the path of the ES. Do not close the terminal until the installation of ES is successful.
Restart the machine after installing the ES.
Uninstalling ES
Follow a similar process of installing the ES but install the specific rollback ES for the version.
Note: An ES rollback uninstalls all the previously installed ESs and brings VVB to the base release.
Documents / Resources
![]() |
CISCO VVB Version Unified CVP Call Studio and VVB Engineering Specials [pdf] User Guide VVB Version Unified CVP Call Studio and VVB Engineering Specials, VVB Version, Unified CVP Call Studio and VVB Engineering Specials, VVB Engineering Specials |