AzureWave AW-HM662 Broadcom WiFi Card Plus Bluetooth 4.0 for MAC
Specifications
- Model: AW-HM662
- Reference Design Guide: Rev. 01
- Revision Date: 2024/9/5
Product Usage Instructions:
Reference Schematic:
The capacitor C321 for VDD_FEM, C3 for VBAT, and C2 for VDDIO must be placed as close as possible.
Antenna Connector:
Please reserve a T-Shaped network for RF tuning.
Mode Select / Reset / Indicate: [Instructions for mode select/reset/indicate]
USB to UART for DUT Control: [Instructions for USB to UART connection]
Power Supply:
[Instructions for power supply connection]
Raspberry PI:
[Instructions for Raspberry PI integration]
Reserve for Debug: [Instructions for debugging]
Revision History
| Version | Revision
Date |
Description | Initials | Approved |
| 01 | 2024/9/5 | l Initial Version | Daniel Lee | N.C. Chen |
Reference Schematic
- AW-HM662
The capacitor C321 for VDD_FEM, C3 for VBAT and C2 for VDDIO must be placed as close a s possible
- Antenna Connector
Please reserve a T Shaped network for RF tuning
- Mode Select / Reset / Indicate
- USB to UART for DUT Control
- Power Supply
3 .3V POWER
1.8V POWE
10 VOLTAGE SELECT
- 4 . OV FEM POWER
- 3.3V FEM POWE}
- USB for LDO Control
- UBS TO UART (LDO Control)
Raspberry PI
Reserve for Debug
The information contained herein is the exclusive property of AzureWave and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of AzureWave.
FAQs
Q: Can I distribute or reproduce the information in this manual?
A: No, the information contained herein is the exclusive property of AzureWave and should not be distributed, reproduced, or disclosed without prior written permission.
Documents / Resources
 |
AzureWave AW-HM662 Broadcom WiFi Card Plus Bluetooth 4.0 for MAC [pdf] Instructions AW-HM662, AW-HM662 Broadcom WiFi Card Plus Bluetooth 4.0 for MAC, Broadcom WiFi Card Plus Bluetooth 4.0 for MAC, WiFi Card Plus Bluetooth 4.0 for MAC, Bluetooth 4.0 for MAC |