Contents hide

1 CL84107 DECT 6.0 Expandable Corded Cordless Phone with Smart Call Blocker

2.2 Important Safety Information:

2.3 Energy Consumption:

2.4 Compatibility:

2.5 Parts Checklist:

2.6 TIA-1083 Compliant Logo:

2.7 Warranty Information:

3 Product Usage Instructions

3.1 Getting Started:

3.2 Using the Corded Handset:

3.3 Using the Cordless Handset:

3.4 Answering System:

4 FAQ (Frequently Asked Questions)

4.1 Q: Where can I find the model and serial numbers of my AT&T telephone?

4.2 Q: How can I obtain warranty service for my AT&T telephone?

4.3 Q: Can I use my AT&T telephone with T-coil equipped hearing aids and cochlear implants?

4.3.1 Documents / Resources

4.3.1.1 References

CL84107 DECT 6.0 Expandable Corded Cordless Phone with Smart Call Blocker

▻

NOTE
CAUTION
DANGER

◆ ➢

✎ ◄/►/▲/▼

➊ ➋

➔

icon file

(ª)¹

Øª⁾s 

AT	BE	BG	HR	CY	CZ	DK
EE	Fl	FR	DE	EL	HU	IE
IT	LV	LT	LU	MT	NL	PL
PT	RO	SK	SI	ES	SE	UK

Indicator lamps			Remaining capacity
Lighted	Off	Blinking
			75% to 100%
			50% to 75%
			25% to 50%
			0% to 25%
			Charge thebattery.
			The battery may have malfunctioned.

Power adapter
USB 2.0
USB 3.0/USB 3.1 Gen 1
USB 3.0/USB 3.1 with PowerShare
USB 3.1 Type-C
eSATA
Thunderbolt
Thunderbolt 3 port with Power Delivery (USB-C)
Network
VGA
DVI
HDMI
DisplayPort
Mini DisplayPort
TV-in
External Graphics Port
Infrared (IR) emitter
Headphone/Audio-out
Headset
Microphone
Line-in
Line-out/Speakers: front left-right
Speakers: rear left-right
Speakers: side left-right
Speakers: Audio center/subwoofer
S/PDIF
Screen-rotation lock
SIM-card slot
ExpressCard slot	EC
Media-card reader
Security-cable slot
Power/Battery-status light
Battery-status light
Hard-drive activity light
Wi-Fi light
bluetooth light

Battery indicator status		Remaining battery capacity
On	Off
		50% to 100%
		20% to 50%
		0% to 20%

Impact force grade displayed on panel	Maximum blows	Application	Work
Hard	3,500 min”‘ (/min)	Tightening when force and speed are desired.	Assembling the steel frame.
Medium	2,600 min”‘ (/min)	Tightening when you need good controlled power.	Assembling or disassembling scaffolds or frameworks.
Soft	1,800 min”‘ (/min)	Tightening when you need fine adjustment with a small diameter bolt.	Assembling furniture.
Reverse rotation auto stop mode	3,500 min”‘ (/min)	Loosening with auto-stop function.	Disassembling bolts/nuts.

✁ ✂ ✄ ☎ ✆ ✝ ✞✟ ✝✠✡✞✠☛✁✂☞✌✄✍✝✞✠✡✠✝✎✞☛✏✑✒✓✁✝✡✓✆✝✞✓✄✔✝✆✞☞✌✄✍✏✁✓✕✂✄✆✟✓✂✏

◆ ➢

✎ ◄/►/▲/▼

Øª⁾s

➊ ➋ .

➔

Product Information

Specifications:

Model Number: CL84107 (one handset), CL84207/CL84257 (two
handsets), CL84307/CL84357 (three handsets)
Type: DECT 6.0 corded/cordless telephone/answering system with
caller ID/call waiting

Serial Number: [Serial Number]

Important Safety Information:

Before using this AT&T product, please read the Important
safety information section on pages 142-143 of the user manual.
This section provides important instructions for the safe and
proper use of the product.

Energy Consumption:

This telephone meets the California Energy Commission
regulations for energy consumption. Your telephone is set up to
comply with the energy conserving standards right out of the box.
No further action is necessary.

Compatibility:

This telephone system is compatible with certain AT&T DECT
6.0 cordless headsets and speakerphones. Visit www.telephones.att.com/accessories
for a list of compatible cordless headsets and speakerphones.

Parts Checklist:

Your telephone package contains the following items:

Abridged user’s manual

Quick start guide
Cordless handset(s)
Telephone base

Corded handset with coiled handset cord attached
Power adapter for telephone base
Battery Pack / Bloc-piles: BT183342/BT283342 (2.4V 400mAh
Ni-MH)

Battery for cordless handset(s)
Battery compartment cover(s)
Charger for cordless handset with power adapter installed

TIA-1083 Compliant Logo:

Telephones identified with this logo have reduced noise and
interference when used with most T-coil equipped hearing aids and
cochlear implants. The TIA-1083 Compliant Logo is a trademark of
the Telecommunications Industry Association. Used under
license.

Warranty Information:

Save your sales receipt and original packaging in case it is
necessary to return your telephone for warranty service.

Product Usage Instructions

Getting Started:

Before using your AT&T corded/cordless telephone/answering
system, please follow these steps:

Refer to the Quick Start Guide provided in the package for
initial setup instructions.
Make sure the telephone base is connected to a power source and
the telephone line.
Charge the batteries for the cordless handset(s) by placing
them in the charger(s) provided.
Once the batteries are charged, insert them into the respective
cordless handset(s) and attach the battery compartment
cover(s).
Follow the instructions in the user’s manual for additional
setup and customization options.

Using the Corded Handset:

To use the corded handset, follow these steps:

Pick up the corded handset from the telephone base or
cradle.
Press the desired buttons on the keypad to dial a number.
During a call, you can adjust the volume using the volume
control buttons.
To end a call, press the “End” button.

Using the Cordless Handset:

To use the cordless handset, follow these steps:

Pick up the cordless handset from the charger or telephone
base.
Press the “Talk” button to initiate a call.
Use the keypad to dial a number.
During a call, you can adjust the volume using the volume
control buttons.
To end a call, press the “End” button.

Answering System:

The AT&T corded/cordless telephone includes an answering
system. To use the answering system, follow these steps:

Press the “Answering System” button on the telephone base or
cordless handset to access the answering system menu.
Follow the voice prompts to set up your personalized greeting
and other answering system options.
To listen to your messages, press the “Play” button on the
telephone base or cordless handset.
Use the navigation buttons to navigate through your
messages.
To delete a message, press the “Delete” button.

FAQ (Frequently Asked Questions)

Q: Where can I find the model and serial numbers of my AT&T
telephone?

A: The model and serial numbers can be found on the bottom of
the telephone base.

Q: How can I obtain warranty service for my AT&T
telephone?

A: In case of warranty service, make sure to save your sales
receipt and original packaging. Contact AT&T customer support
at 1 800-222-3111 (USA) or 1 866-288-4268 (Canada) for further
assistance.

Q: Can I use my AT&T telephone with T-coil equipped hearing
aids and cochlear implants?

A: Yes, AT&T telephones identified with the TIA-1083
Compliant Logo have reduced noise and interference when used with
most T-coil equipped hearing aids and cochlear implants.

View Fullscreen

Complete user’s manual
CL84107/CL84207/CL84257/ CL84307/CL84357 DECT 6.0 corded/cordless telephone/answering system with caller ID/call waiting

Congratulations
on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information section on pages 142-143 of this manual. Please thoroughly read this user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at
www.telephones.att.com or call 1 800-222-3111. In Canada, dial 1 866-288-4268.
This telephone meets the California Energy Commission regulations for energy consumption. Your telephone is set up to comply with the energyconserving standards right out of the box. No further action is necessary.

This telephone system is compatible with certain AT&T DECT 6.0 cordless
headsets and speakerphones. Visit
www.telephones.att.com/accessories for a list of compatible
cordless headsets and speakerphones.

Model number: CL84107 (one handset)

CL84207/CL84257 (two handsets)

Type:

CL84307/CL84357 (three handsets) DECT 6.0 corded/cordless telephone/answering system with caller ID/call waiting

Serial number: ________________________________________________________ Purchase date: _______________________________________________________ Place of purchase: ____________________________________________________________

Both the model and serial numbers of your AT&T product can be found on the bottom of the telephone base.
Save your sales receipt and original packaging in case it is necessary to return your telephone for warranty service.

Telephones identified with this logo have reduced noise and interference when used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license.

The ENERGY STAR® program (www.energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to mark this product with the ENERGY STAR® label indicating it meets the latest energy efficiency guidelines.
© 2017 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China.

Parts checklist
Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary.

Abridged user’s manual CL84107/CL84207/CL84257/ CL84307/CL84357 DECT 6.0 corded/cordless telephone/answering system with caller ID/call waiting
Abridged user’s manual

CL84107/CL84207/CL84257/ CL84307/CL84357
Quick start guide
Quick start guide

Cordless handset
(1 for CL84107) (2 for CL84207/CL84257) (3 for CL84307/CL84357)

Telephone base

Corded handset with coiled handset cord attached

Power adapter for Telephone line cord telephone base

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

BT183342/BT283342 (2.4V 400mAh Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine

CR1349

Battery for cordless handset
(1 for CL84107) (2 for CL84207/CL84257) (3 for CL84307/CL84357)

Battery compartment cover
(1 for CL84107) (2 for CL84207/CL84257) (3 for CL84307/CL84357)

Charger for cordless handset with power adapter installed
(1 for CL84107) (2 for CL84207/CL84257) (3 for CL84307/CL84357)

Complete user’s manual
CL84107/CL84207/CL84257/ CL84307/CL84357 DECT 6.0 corded/cordless telephone/ answering system with caller ID/ call waiting

Table of contents
Getting started
Quick reference guide – handset……… 1 Quick reference guide –
telephone base………………………………….. 4 Installation ………………………………………………… 8 Telephone base and charger
installation …………………………………………… 9 Charger installation…………………………. 9 Battery installation and charging …. 10 Line power mode (no AC power)…….13 To make a call during a power
failure ………………………………………………….13 To answer a call during a
power failure ……………………………………13 Installation options ……………………………… 14
Tabletop to wall-mount installation………………………………………. 14
Wall-mount to tabletop installation………………………………………. 16
Telephone settings
Handset settings ………………………………….. 18 Ringer volume ………………………………….. 19 Ringer tone………………………………………… 19 Set date/time……………………………………20 LCD language……………………………………..21 Caller ID announce …………………………. 22 Set speed dial voicemail number …………………………………………….. 23 Voicemail (visual message waiting) indicator…………………………. 23 Clear voicemail indicator ……………..24 Rename handset …………………………… 25 Key tone ……………………………………………… 25 Use caller ID to automatically set date and time………………………….26

Home area code ………………………………26 Dial mode …………………………………………… 27 Web address ……………………………………… 27 QUIET mode……………………………………….28 Telephone base settings……………………29 Ringer volume …………………………………..30 Ringer tone…………………………………………30 Set date/time…………………………………….31 LCD language……………………………………. 32 Caller ID announce …………………………. 33 Set speed dial voicemail
number ……………………………………………..34 Voicemail (visual message
waiting) indicator………………………….34 Clear voicemail indicator ……………. 35 Rename base ……………………………………. 35 Key tone ………………………………………………36 Use caller ID to automatically
set date and time………………………….36 Home area code ……………………………… 37 Dial mode ……………………………………………38 Web address ………………………………………38
Telephone operation
Telephone operation …………………………..39 Making a call ………………………………………39 On hook dialing (predialing) ……….39 Answering a call ……………………………….39 Ending a call ……………………………………… 40 Auto off………………………………………………. 40 Temporary ringer silencing ……….. 40 Handset speakerphone ……………….. 41 Last number redial …………………………. 41 Equalizer ………………………………………………42
Options while on calls …………………………43 Volume control…………………………………43

Call waiting …………………………………………43 Mute …………………………………………………….. 44 Chain dialing …………………………………….. 44 Temporary tone dialing ………………..45 Blind transfer …………………………………… 46
Multiple handset use
Multiple handset use………………………….. 48 Handset locator ……………………………… 48 Join a call in progress …………………… 48
Intercom………………………………………………….. 49 Answer an incoming call during an intercom call ………………50
Call transfer using intercom ……………..51 Push-to-talk (PTT)……………………………….. 52
Turn PTT on or off ………………………….. 52 PTT call to a single device …………… 53 PTT call to multiple devices ……….. 55 Answer a PTT call …………………………….56 Change a one-to-one PTT call
to an intercom call ……………………….56 Answer an incoming call
during a PTT call …………………………… 57 Make an outgoing call
during a PTT call …………………………… 57 End or leave a PTT call………………….. 57

Check your voicemail using speed dial …………………………….67
Caller ID
About caller ID………………………………………..68 Information about caller ID with call waiting …………………………….68
Caller ID log ……………………………………………..69 How the caller ID log works ………..69 Missed (new) call indicator ………….69
Caller ID operation………………………………..70 Memory match …………………………………70 Review the caller ID log………………….71 View dialing options………………………. 72 Dial a caller ID log entry……………….. 72 Delete caller ID log entries …………. 72 Save a caller ID log entry to the directory…………………………….. 73 Save a caller ID log entry to the allow list ……………………………… 74 Save a caller ID log entry to the block list……………………………… 74 Save a caller ID log entry to the star name list……………………. 75
Reasons for missing caller ID information ……………………………………….. 76

Directory
About the directory……………………………..58 Shared directory………………………………58 Capacity……………………………………………….58
Create directory entries …………………….59 Create a new directory entry……..59 Add a predialed telephone number to the directory ……………60
Review the directory…………………………… 61 Review directory entries……………… 61 Search by name ……………………………….62
Dial, delete or edit directory entries…………………………………………………..63 Display dial………………………………………….63 Delete a directory entry……………….63 Edit a directory entry …………………… 64
Speed dial …………………………………………………65 Assign a speed dial number………..65 Reassign a speed dial number …..66 Assign your speed dial voicemail number …………………………66 Delete a speed dial number………..67 Make a call using speed dial………..67

Smart call blocker
About Smart call blocker*………………… 77 Call categories ………………………………….78 Call controls ……………………………………….78
Call block settings……………………………….. 80 Set Smart call blocker on/off …… 80 Control calls without numbers… 80 Control uncategorized calls……….. 81 Block list ………………………………………………82 Allow list ………………………………………………85 Star name list…………………………………… 88 Screening announcements………… 91 Allow calls without numbers…….. 94 Allow uncategorized calls…………… 94
Blocked calls ……………………………………………95 Block calls without numbers………95 Block uncategorized calls…………….95
Screen calls without numbers…………96 Answer call once……………………………… 97 Send call to answering system ….98 End call …………………………………………………98
Screen uncategorized calls ………………99 Allow call once……………………………….. 100

Always allow ……………………………………. 101 Block call …………………………………………… 101 Send call to answering system ..102 Option while on a call ………………………..103
Answering system
Answering system settings…………… 104 Announcement……………………………… 104 Answer on/off …………………………………107 Voice guide……………………………………… 108 Call screening…………………………………. 109 Number of rings…………………………….. 110 Remote access code……………………..111 Message alert tone………………………. 112 Message recording time ……………. 113
About the answering system…………114 Answering system and voicemail indicators …………………..114 Using the answering system and voicemail together…………… 114 Message capacity …………………………. 115 Voice prompts………………………………… 115 Call screening………………………………….. 115 Call intercept…………………………………… 116 Base ringer……………………………………….. 116 Temporarily turning off the message alert tone …………………… 116
Message playback………………………………..117 Options during playback……………. 118 Delete all old messages……………… 119
Recording and playing memos ……..120 Record a memo………………………………120 Play back a memo …………………………120
Base message counter displays…… 121 Message counter displays…………. 121
Remote access……………………………………..122

Lights …………………………………………………..128 Screen display messages…………………129 Troubleshooting………………………………….. 132 Maintenance…………………………………………. 141 Important safety information ……….142
Safety information………………………..142 Especially about cordless
telephones ……………………………………..143 Precautions for users of
implanted cardiac pacemakers …………………………………..143 Pacemaker patients ……………………..143 ECO mode …………………………………………143 Especially about telephone answering systems …………………….143 FCC Part 68 and ACTA ……………………… 144 FCC Part 15 ……………………………………………..145 California Energy Commission battery charging testing instructions …………………………………….. 146 Limited warranty …………………………………147 Technical specifications………………….. 149 DECT 6.0 digital technology…….. 149 Telephone operating range …….. 149 Redefining long range coverage and clarity ………………… 149 HD audio…………………………………………… 149 Simulated full-duplex handset speakerphone …………………………….. 149
Index
Index ………………………………………………………….150

Appendix
Adding and registering handsets/ headsets/speakerphones ………….124 Register a handset to the telephone base…………………………….124
Deregistering handsets ……………………125 Deregister all handsets from the telephone base ……………………125
Alert tones and lights………………………..126 Handset screen icons…………………..126 Telephone base screen icons……126 Handset alert tones ……………………..127 Telephone base alert tones………127

Getting started
Quick reference guide – handset

CHARGE indicator ff On when the handset is charging in the
charger.
PUSH TO TALK ff Press to initiate a one-to-one (page
53) or one-to-group broadcast (page 55).
ff Press and hold to broadcast to a group of system devices (page 55).
REDIAL/PAUSE
ff Press repeatedly to view the last 10 numbers dialed (page 41).
ff While entering numbers, press and hold to insert a dialing pause.
MENU/SELECT ff When the handset is not in use, press to
show the menu. ff While in the menu, press to select an
item or save an entry or setting.
PHONE/FLASH
ff Press to make or answer a call (page 39).
ff During a call, press to answer an incoming call when you receive a call waiting alert (page 43).
ff During message playback, press to call back the caller if the caller’s number is available (page 118). 1

OFF/CANCEL
ff During a call, press to hang up (page 40).
ff While in a menu, press to cancel an operation, back up to the previous menu, or exit the menu display; or press and hold this button to exit to idle mode.
ff When the handset is ringing, press to mute the ringer temporarily (page 40).
ff Press and hold while the telephone is not in use to erase the missed call indicator.
1
ff While reviewing a caller ID log entry, press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it (page 72).
ff Press and hold to set (page 23) or dial your voicemail number (page 67).
TONE /a>A
ff Press to switch to tone dialing temporarily during a call if you have pulse service (page 45).
ff While entering names, press to change the next letter to upper or lower case.

Getting started
Quick reference guide – handset

QUIET# (pound key)
ff Press repeatedly to display other dialing options when reviewing a caller ID log entry (page 71).
ff Press and hold to enter the QUIET mode setting screen, or to deactivate QUIET mode (page 28).
/SPEAKER
ff Press to make or answer a call using the speakerphone (page 39).
ff Press to switch between the speakerphone and the handset (page 41).
MUTE/DELETE
ff During a call, press to mute the microphone (page 44).
ff When the handset is ringing, press to mute the ringer temporarily (page 40).
ff While reviewing the caller ID log, directory, redial memory, block list, allow list or star name list, press to delete an individual entry (page 72, page 63, page 42, page 84, page 88, page 90, respectively).
ff While predialing, press to delete digits (page 39).
ff During message or announcement playback, press to delete the playing message or the recorded announcement (page 118 and page 106, respectively). 2

CALL BLOCK ff Press to block the incoming call when
the telephone is ringing or during the call (page 77 and 103). ff When the handset is not in use, press to show the Smart call blocker menu (page 80).
pDIR/VOLUME
ff Press pDIR to show directory entries when the handset is not in use (page 61).
ff Press to scroll up while in menus and lists.
ff While entering names or numbers, press to move the cursor to the right.
ff Press to increase the listening volume when on a call (page 43), or to increase the message playback volume (page 118).
qCID/VOLUME
ff Press qCID to show caller ID log when the handset is not in use (page 71).
ff Press to scroll down while in menus and lists.
ff While entering names or numbers, press to move the cursor to the left.
ff Press to decrease the listening volume when on a call (page 43), or to decrease the message playback volume (page 118).

Getting started
Quick reference guide – handset
Main menu

The > symbol highlights a menu item.
>Play messages Answering sys
fffff

Main menu
ff Play messages (page 117) ff Answering sys (page 104) ff Smart call blk (page 77) ff Directory (page 58) ff Caller ID log (page 69) ff Intercom (page 49) ff Ringers (page 19) ff Set date/time (page 20) ff Settings (page 18) ff Web address (page 27)

Using menus:
ff Press MENU/SELECT to show the menu. ff Press qCID or pDIR to scroll through menu items. ff Press MENU/SELECT to confirm or save changes to a highlighted menu item. ff Press OFF/CANCEL to cancel an operation, back up to the previous menu,
or exit the menu display.

Getting started
Quick reference guide – telephone base

FLASH/PTT ff Press to initiate a one-to-one (page
54) or one-to-group broadcast (page 55).
ff Press and hold to broadcast to a group of system devices (page 55).
ff During a call, press to answer an incoming call when you receive a call waiting alert (page 43).
qCID ff Press qCID to show caller ID
log when the telephone is not in use (page 71). ff Press to scroll down while in menus and lists. ff While entering names or numbers, press to move the cursor to the left.
MENU/SELECT ff When the telephone is not in use, press
to show the menu. ff While in the menu, press to select an
item or save an entry or setting.
pDIR ff Press pDIR to show directory entries
when the telephone is not in use (page 61). ff Press to scroll up while in menus and lists. ff While entering names or numbers, press to move the cursor to the right.

CANCEL ff While in a menu, press to cancel an
operation, back up to the previous menu, or exit the menu display; or press and hold to exit to idle mode. ff When the telephone base is ringing, press to mute the ringer temporarily (page 40). ff Press and hold while the telephone is not in use to erase the missed call indicator.
CALL BLOCK ff Press to block the incoming call when
the telephone is ringing or during the call (page 77 and 103). ff When the telephone base is not in use, press to show the Smart call blocker menu (page 80).
REDIAL/PAUSE ff Press repeatedly to view the last 10
numbers dialed (page 41). ff While entering numbers,
press and hold to insert a dialing pause.
/ANS ON/OFF ff Press to turn the built-in answering
system on or off (page 107).

Getting started
Quick reference guide – telephone base

/REPEAT ff During playback, press to repeat the
playing message (page 118). ff During playback, press twice to play
the previous message (page 118).
SKIP
ff Press to skip a message (page 118).
/PLAY/STOP
ff Press to start or stop message playback (page 118).
MUTE/DELETE ff During a call, press to mute the
microphone (page 44). ff When the telephone is ringing, press
to mute the ringer temporarily (page 40). ff While reviewing the caller ID log, directory, redial memory, block list, allow list or star name list, press to delete an individual entry (page 72, page 63, page 42, page 84, page 88, page 90, respectively). ff While predialing, press to delete digits. ff During message or announcement playback, press to delete the playing message or announcement. ff Press twice to delete all old messages when the telephone is not in use (page 119).
/SPEAKER ff Press to make or answer a call using
the speakerphone (page 39). 5

MIC ff Microphone.
1 ff Press and hold to set (page 34) or to
dial your voicemail number (page 67).
TONE /a>A ff Press to switch to tone dialing
temporarily during a call if you have pulse service (page 45). ff While entering names, press to change the next letter to upper or lower case.
QUIET# (pound key) ff Press repeatedly to display other
dialing options when reviewing a caller ID log entry (page 72). ff Press and hold to enter the QUIET mode setting screen, or to deactivate QUIET mode (page 28).

Getting started
Quick reference guide – telephone base

p VOL/qVOL ff During message playback or call
screening, press to adjust the listening volume (page 118). ff While in idle mode, press to adjust the base ringer volume. ff When on a call, press to adjust the listening volume.
/FIND HS ff While the telephone is idle, press to
page all handsets (page 48).

IN USE indicator
ff On when the telephone is in use, or when the answering system is answering an incoming call.
ff On when a handset is being registered. ff Flashes when there is an incoming
call or when all handsets are being deregistered. ff Flashes when another telephone is in use on the same line.

Getting started
Quick reference guide – telephone base

Main menu

The > symbol highlights a menu item.

>Play messages Answering sys

fpqffff

Main menu
ff Play messages (page 117) ff Answering sys (page 104) ff Smart call blk (page 77) ff Directory (page 58) ff Caller ID log (page 69) ff Intercom (page 49) ff Ringers (page 30) ff Set date/time (page 31) ff Settings (page 32) ff Web address (page 38)

Using menus:
ff Press MENU/SELECT to show the menu. ff Press qCID or pDIR to scroll through menu items. ff Press MENU/SELECT to confirm or save changes to a highlighted menu item. ff Press CANCEL to cancel an operation, back up to the previous menu, or
exit the menu display.

Getting started
Installation

You must install and charge the battery before using the telephone.

STOP!

See pages 10-11 for easy instructions.

Install the telephone base close to a telephone jack and a power outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall (see page 14). For optimum range and better reception, place the telephone base in a central and open location.
If you subscribe to high-speed Internet service (DSL – digital subscriber line) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack (see the following page). The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters.
Your product may be shipped with protective stickers covering the handset and telephone base displays – remove them before use.
For customer service or product information, visit our website at
www.telephones.att.com or call 1 800-222-3111. In Canada, dial 1 866-288-4268.
Avoid placing the telephone base and charger too close to:
ff Communication devices such as television sets, VCRs, or other cordless telephones.
ff Excessive heat sources. ff Noise sources such as a window with traffic outside, motors, microwave
ovens, refrigerators, or fluorescent lighting. ff Excessive dust sources such as a workshop or garage.
ff Excessive moisture.
ff Extremely low temperature.
ff Mechanical vibration or shock such as on top of a washing machine or workbench.

Getting started
Telephone base and charger installation
Install the telephone base and charger, as shown below. The telephone base is ready for tabletop use. If you want to change to wall-mounting, see Installation options on page 14 for details.
Telephone base installation

Plug one end of the telephone line cord into a telephone jack or a DSL filter.
If you have DSL high-speed Internet service, a DSL filter (not included) is required.

Plug the large end of the telephone base power adapter into a power outlet not controlled by a wall switch.

Route the telephone line cord through this slot.
Plug the other end of the telephone line cord into the telephone jack on the back of the telephone base.

Route the power adapter cord through this slot.
Plug the small end of the telephone base power adapter into the power adapter jack on the back of the telephone base.

Plug the other end of the coiled handset cord into the jack on the back of the telephone base.

Raise the antenna.

Charger installation

Plug the power adapter into a power outlet not controlled by a wall switch.

IMPORTANT INFORMATION
ff Use only the power adapter(s) supplied with this product. To order a replacement
power adapter, visit our website at www.telephones.att.com or call 1 800-222-3111. In Canada, dial 1 866-288-4268.
ff The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-thetable or cabinet outlet. 9

Getting started
Battery installation and charging

Install the battery, as shown below. Once you have installed the battery, the screen indicates the battery status (see the following table). If necessary, place the handset in its charger to charge the battery. For best performance, keep the handset in the charger when not in use. The battery is fully charged after 10 hours of continuous charging. See the table on page 149 for battery operating times.
If the screen shows Place in charger and flashes, you need to charge the handset without interruption for at least 30 minutes to give the handset enough charge to use the telephone for a short time. The following table summarizes the battery charge indicators and actions to take.

Battery indicators
The screen is blank, or shows Place in charger and (flashing).
The screen shows Low battery and (flashing).
The screen shows HANDSET X.

Battery status

Action

Battery has no or very little charge. The handset cannot be used.

Charge without interruption (at least 30 minutes).

Battery has enough charge Charge without interruption to be used for a short time. (at least 30 minutes).

Battery is charged.

To keep the battery charged, place the handset in the charger when not in use.

Note: If you are on a phone call in low battery mode, you hear four short beeps every minute.
Step 1 Plug the battery connector securely into the socket inside the handset battery compartment. Insert the supplied battery with the label THIS SIDE UP facing up, as indicated.
THIS SIDE UP

MaNdEeDiPOnAWNCSABIhORiTNTB1nNIaC8atIBN3t/NU3eGFrÉ4R/ay2RN/bAPrEBiVOaRTqTEcR2ukORH8éIP/T3UISUe3BSPln4NSSoEI2CccE(RTh-Di2MC.pUEni4lEEReeVNUREsT4PL:B:0/E0ASTCmTPEAIEhLCRIENÔEiS-.TS.MÉH)VERS LE HAUT CR1349

Getting started
Battery installation and charging
Step 2 Align the cover flat against the battery compartment, then slide it upwards until it clicks into place.

i2MC.Un4EEReVNRET4L:B:0E0ASTmTPAIEhLRIENÔEiS-.TS.MÉH)VERS LE HAUT CR1349

Step 3
Charge the handset by placing it face forward in the charger. The CHARGE light on the top of the handset is on during charging.

IMPORTANT INFORMATION ff Use only the supplied rechargeable battery or replacement battery (model BT183342/
BT283342). To order, visit our website at www.telephones.att.com or call 1 800-222-3111. In Canada, dial 1 866-288-4268.
ff If you do not use the handset for a long time, disconnect and remove the battery to prevent possible leakage.

After you install your telephone or power returns following a power outage, the handset and base will prompt you to set the date and time. For instructions on setting the date and time using a cordless handset or the telephone base, see Set date/time on page 20 and page 31, respectively. To skip setting the date and time, press
OFF/CANCEL on a cordless handset or CANCEL on the telephone base.

SET DATE MM/DD/YY fffff
SET TIME HH:MM -fffff

Getting started
Battery installation and charging

After the date and time setting is done or skipped, the telephone base then prompts if you want to set Smart call blocker. Press MENU/SELECT to start the Smart call blocker setup via voice guide. To skip the setup, press CANCEL on the telephone base. For more details, see Smart call blocker on page 77.

Voice guide set Smart call blk?

Voice guide to set Smart call blocker:

If you choose to set Smart call blocker via voice guide, you hear a voice prompt, “Hello! This voice guide will assist you with the basic setup of Smart call blocker…”. Listen to the instructions and then choose one of the following options.

Setting up Smart call blk…

On the telephone base: ff Press 1 if you want to turn off default call screening settings, and allow all
incoming calls to get through;

ff Press 2 if you want to screen calls with telephone numbers that are not saved in your directory, allow list and star name list; or

ff Press 3 if you only want to screen calls that do not display a phone number.

If you select option 2 to screen all incoming calls, we recommend that you add the phone numbers of your family members and friends, and desired businesses to your Directory (see page 58) or Allow list (see page 85), or add their names to the Star name list (see page 88). This will avoid Smart call blocker to screen their calls.

After the Smart call blocker setting is done or skipped, the telephone base will prompt if you want to set up the answering system. Press MENU/SELECT to start the answering system setup via voice guide. For more details, see Voice guide on page 108. To skip the setup, press CANCEL on the telephone base.

Voice guide to set up Ans sys?

Note: Voice guides to set Smart call blocker and answering system are only available on the telephone base.

Getting started
Line power mode (no AC power)
This telephone provides minimal functionality during a power failure. When AC power is not available, the screen is blank and many telephone features do not function. Only touch-tone dialing and corded handset volume adjustment are supported. The telephone uses power from the telephone line to enable you to make and answer calls using the corded handset and dialing keys. After you install your telephone or the power returns following a power outage, the telephone base or cordless handset will prompt you to set the date and time. For instructions, see Set date/time on page 20 and page 31 for details. To skip setting the date and time, press OFF/CANCEL on a cordless handset or CANCEL on the telephone base. To make a call during a power failure 1. Lift the corded handset and wait for a dial tone. The screen displays
Base Check AC power. 2. Slowly dial a telephone number using the dialing keys. Wait to hear each
key tone upon inputting a digit before pressing the next dialing key. To answer a call during a power failure ff Lift the corded handset.
Note: The screen does not show incoming caller ID information during a power failure.
13

Getting started
Installation options
The telephone base comes with a mount bracket set for tabletop use. If you want to mount your telephone on a wall, rotate the mount bracket down so the telephone can connect with a standard dual-stud telephone wall-mounting plate. If you do not have this mounting plate, you can purchase one from many hardware or consumer electronics retailers. You might need a professional to install the mounting plate.
Tabletop to wall-mount installation
To install the telephone base in the wall-mount position, make sure that you first unplug the telephone line cord and power adapter from the telephone wall jack and power outlet. 1. Pull the integrated wall-mount bracket and release it from the tabletop
orientation, as shown below. Rotate it down into wall-mount position and then push it into the telephone base until it clicks into place.
Rear view
Use four fingers to press and release the wall-mount bracket.

Pull the middle of the wall-mount bracket to release.

-ORRear view

Wall-mount
14

Getting started
Installation options
2. Slide the handset tab upward. Rotate the handset tab by 180 degrees. The protruding edge of the handset tab holds the corded handset in place when the telephone is mounted on the wall. Switch hook
Handset tab 3. Make sure the telephone line cord and the power adapter are plugged into
their jacks on the telephone base, and are routed through the channels. If necessary, bundle the telephone cord and power adapter cord, and secure them with twist ties. Plug the power adapter and telephone line into the wall outlets.
4. Align the mounting studs on the mounting plate with the mounting holes on the bracket and press the telephone base down until it clicks securely into place.
15

Getting started
Installation options
Wall-mount to tabletop installation To change the telephone base from the wall-mount position to tabletop position: 1. Remove the telephone base from the wall. 2. If necessary, untie the bundled telephone cord and power adapter cord.
Make sure that you unplug the power adapter and telephone line cord from the wall outlets before you begin. 3. Push, as indicated by arrows in the illustration, until the bracket is released, and then rotate it upward until it clicks into the tabletop position.
Rear view

Side view

Wall-mount
16

Tabletop

Getting started
Installation options
4. Slide the handset tab upward. Rotate the handset tab by 180 degrees. Switch hook
Handset tab 5. Make sure the telephone line cord and power adapter cord are securely
plugged into their jacks on the back of the telephone base. Plug the power adapter and telephone line into the wall outlets.
17

Telephone settings
Handset settings

Use the menu to change the telephone settings.
1. Press MENU/SELECT on the handset when it is not in use to enter the main menu.
2. Press qCID or pDIR to scroll to the feature to be changed. When scrolling through the menu, the > symbol indicates the selected menu item.
3. Press MENU/SELECT to select the highlighted item.

>Play messages Answering sys
fffff

Note: Press OFF/CANCEL to cancel an operation, back up to the previous menu or exit the menu display. Press and hold OFF/CANCEL to return to idle mode.

Go to Answering system settings starting on page 104 for instructions on how to use a system handset to modify the answering system settings, as shown below.

Setting Announcement (play, record and delete) Answer on/off Call screening Number of rings Remote access code Message alert tone Message recording time

Page
104-106 107 115 110 111 112 113

Telephone settings
Handset settings
Ringer volume
You can set the ringer volume level to one of six levels or turn the ringer off. When the ringer is off, appears on the screen.
1. Press MENU/SELECT in idle mode to enter the main menu. 2. Press qCID or pDIR to scroll to Ringers, then press
MENU/SELECT.
3. Press MENU/SELECT again to select Ringer volume. 4. Press qCID or pDIR to sample each volume level.
5. Press MENU/SELECT to save your preference. There is a confirmation tone and the screen returns to the previous menu.

Intercom >Ringers fffff
>Ringer volume Ringer tone
RINGER VOLUME

Notes:
ff The handset ringer volume also determines the ringer volume for intercom calls.
ff If the ringer volume is set to off, that handset is silenced for all incoming calls. However, the handset still plays the paging tone when responding to the handset locator.
ff If the ringer volume is set to off, the caller ID will not be announced and the screen will briefly display Caller ID won’t be announced.

Ringer tone
You can choose one of ten ringer tones.
1. Press MENU/SELECT in idle mode to enter the main menu. 2. Press qCID or pDIR to scroll to Ringers, then press
MENU/SELECT. 3. Press qCID or pDIR to scroll to Ringer tone, then press
MENU/SELECT. 4. Press qCID or pDIR to sample each ringer tone.
5. Press MENU/SELECT to save your preference. There is a confirmation tone and the screen returns to the previous menu.

Ringer volume >Ringer tone
RINGER TONE >Tone 1

Note: If you turn off the ringer volume, you will not hear ringer tone samples.

Telephone settings
Handset settings

Set date/time

The answering system announces the day and time of each message prior to playing it. Before using the answering system, set the date and time as follows. If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. The year must be set so that the day of the week can be calculated from the caller ID information. You can turn off the date and time settings of the caller ID service and set the date and time manually (see Use caller ID to automatically set date and time on page 26).

After a power failure or handset registration, the system prompts you to set the date and time.

To set the date and time manually:

1. When the handset is in idle mode, press MENU/SELECT to enter the main menu.
2. Press qCID or pDIR to scroll to Set date/time and then press MENU/SELECT.

Ringers >Set date/time

3. Press qCID or pDIR to select the month, then press MENU/SELECT, or enter the number using the dialing keys.
4. Press qCID or pDIR to select the day, then press MENU/SELECT, or enter the number using the dialing keys.

SET DATE MM/DD/YY

5. Press qCID or pDIR to select the year, or enter the number using the dialing keys, then press MENU/SELECT to move on to set the time.
6. Press qCID or pDIR to select the hour, then press MENU/SELECT, or enter the number using the dialing keys.

SET TIME HH:MM —

7. Press qCID or pDIR to select the minute, then press MENU/SELECT, or enter the number using the dialing keys.

8. Press qCID or pDIR to highlight AM or PM, or press 2 for AM or 7 for PM. Then, press MENU/SELECT to confirm. There is a confirmation tone and the screen returns to the previous menu.

Note: If the clock is not set when a message is recorded, the system announces, “Time and day not set,” before it plays the message.

Telephone settings
Handset settings

LCD language

You can select the language used for all screen displays.

1. Press MENU/SELECT in idle mode to enter the main menu.
2. Press qCID or pDIR to scroll to Settings, then press MENU/SELECT.
3. Press MENU/SELECT to choose LCD language.
4. Press qCID or pDIR to highlight English, Français or Español, then press MENU/SELECT. The screen prompts Set English/ Français/ Español as LCD language?.
5. Press MENU/SELECT to confirm. There is a confirmation tone and the screen returns to the previous menu.

LCD LANGUAGE >English
Set Francais as
LCD language?

Note: If you accidentally change the LCD language to French or Spanish, you can reset it back to English without going through the French or Spanish menus. When in idle mode, press MENU/SELECT once on the handset, then enter 364#. There is a confirmation tone.

Telephone settings
Handset settings

Caller ID announce

The caller ID announce feature lets you know who’s calling without having to look at the display. When you have an incoming call, the handset and/or base speaks “Call from…” and the name of the caller based on the directory or caller ID information. If the caller’s name is private or unknown, the phone number up to the last 11 digits will be announced. If the caller’s phone number is also private or unknown, no information will be announced. The default setting is On.

To turn on or off the caller ID announce feature:

1. Press MENU/SELECT in idle mode to enter the main menu.
2. Press qCID or pDIR to scroll to Settings, then press MENU/SELECT.

LCD language >Caller ID annc

3. Press qCID or pDIR to scroll to Caller ID annc, then press MENU/SELECT.
4. Press qCID or pDIR to scroll to the desired option, then press MENU/SELECT. ff Set all On/Off – Change the setting for the base and all handsets.

CALLER ID ANNC >Local handset

ff Local handset – Change the setting for that handset only HS CID ANNOUNCE

(when programming from a cordless handset only).

>On

ff Base – Change the setting for the telephone base only.
5. Press qCID or pDIR to highlight On or Off, then press MENU/SELECT. There is a confirmation tone and the screen returns to the previous menu. If you change the setting for Set all On/Off, the screen shows CID Annc ON/OFF on all HS & BS.

Notes:
ff To use the caller ID announce feature, you must subscribe to caller ID service from your telephone service provider.
ff If you have paired an AT&T TL80133 DECT 6.0 cordless speakerphone to the telephone base, the caller ID announce setting for all devices also applies to the cordless speakerphone. When the setting is On, the cordless speakerphone speaks “Call from…” and the name of the caller based on the directory or caller ID information during an incoming call. If the caller’s name is unavailable, the phone number up to the last 11 digits will be announced.
ff When there are up to five handsets registered, the telephone system supports caller ID announce for all handsets. If six or more handsets are registered, the system supports caller ID announce for the first four registered handsets only.
ff This feature does not announce information for call waiting calls.
ff It takes at least 2 rings for the phone to receive caller ID information and announce it. If the phone is answered before the end of the second ring, the phone won’t have time to announce the caller’s information.
ff Pronunciation of names may vary with this feature. Not all names may be pronounced correctly.
ff Caller ID announce is available in English only.

Telephone settings
Handset settings

Set speed dial voicemail number

This feature lets you save your voicemail number for easy access when you press and hold the 1 key.

To save your voicemail number:

1. Press MENU/SELECT in idle mode to enter the main menu.
2. Press qCID or pDIR to scroll to Settings, then press MENU/SELECT.

Caller ID annc >Voicemail #

3. Press qCID or pDIR to scroll to Voicemail #, then press MENU/SELECT.
4. Press the dialing keys to enter the voicemail access number provided by your telephone service provider (up to 30 digits).

VOICEMAIL # 800-222-3111_

ff Press qCID or pDIR to move the cursor to the left or right.
ff Press MUTE/DELETE to erase a digit.

Voicemail # saved

ff Press and hold MUTE/DELETE to erase all digits.

ff Press REDIAL/PAUSE to enter a three-second dialing pause (a p appears).
5. Press MENU/SELECT to save. There is a confirmation tone. The screen displays Voicemail # saved, and then returns to the previous menu.

Voicemail (visual message waiting) indicator
If you subscribe to a voicemail service offered by your telephone service provider, this feature provides a visual indication when you have new voicemail messages.
New voicemail and the icon appear on the handset screen.

HANDSET 1 New voicemail

10:21PM

2/1A1M

Notes:
ff This feature does not indicate new messages recorded on your phone’s built-in answering system. ff For more information about the difference between your answering system and voicemail, see page 114.

Telephone settings
Handset settings

Clear voicemail indicator

Use this feature when the telephone indicates there is new voicemail but there is none. For example, when you have accessed your voicemail while away from home. This feature only turns off the displayed New voicemail and the icon; it does not delete your voicemail messages. As long as you have new voicemail messages, your telephone service provider continues to send the signal to turn on the indicator.

To manually turn off the new voicemail indicator:

Voicemail #
>Clr voicemail
Reset Voicemail Indicator?

4. Press MENU/SELECT again to turn the voicemail indicator off. There is a confirmation tone and the screen returns to the previous menu.

Notes:
ff Your telephone service provider voicemail may alert you to new messages with a stutter (broken) dial tone. Contact your telephone service provider for more details.
ff For information about using your voicemail service, contact your telephone service provider.

Telephone settings
Handset settings

Rename handset
The default handset name is HANDSET. You can create your own handset name for each system handset.

1. When the handset is idle, press MENU/SELECT.
2. Press qCID or pDIR to scroll to Settings, then press MENU/SELECT.

Clr voicemail >Rename handset

3. Press qCID or pDIR to scroll to Rename handset, then press MENU/SELECT.
4. Change the handset name when prompted.
ff Use the dialing keys and the chart on page 60 to enter a name (up to 11 characters). Press a key repeatedly until the desired character appears on the screen.

RENAME HANDSET HANDSET____

ff Press qCID or pDIR to move the cursor to the left or right.

ff Press MUTE/DELETE to backspace and delete a character.

ff Press and hold MUTE/DELETE to delete all characters.

5. Press MENU/SELECT to save the setting and return to the previous menu. There is a confirmation tone.

Key tone

The handset is set to beep with each key press. You can adjust the key tone volume or turn it off. If you turn off the key tone, there are no beeps when
you press keys.

1. Press MENU/SELECT in idle mode to enter the main menu.
2. Press qCID or pDIR to scroll to Settings, then press MENU/SELECT.
3. Press qCID or pDIR to scroll to Key tone, then press MENU/SELECT.
4. Press qCID or pDIR to select the desired volume or Off.
5. Press MENU/SELECT to save your preference. There is a confirmation tone and the screen returns to the previous menu.

Rename handset >Key tone
KEY TONE

Telephone settings
Handset settings

Use caller ID to automatically set date and time

If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. Follow the steps below to turn the CID time sync feature on or off. The default setting is On.

1. When the handset is in idle mode, press MENU/SELECT to enter the main menu.
2. Press qCID or pDIR to scroll to Settings, then press MENU/SELECT.
3. Press qCID or pDIR to scroll to CID time sync, then press MENU/SELECT.
4. Press qCID or pDIR to highlight On or Off, then press MENU/SELECT to save. There is a confirmation tone and the screen returns to the previous menu.

Key tone >CID time sync
CID TIME SYNC >On

Home area code

If you dial seven digits to make a local call (no area code required), enter your area code into the telephone as the home area code. When you receive a call from within your home area code, the caller ID log only displays the seven digits of the telephone number.
This feature makes it easy for you to place a call from the caller ID log. If you dial 10 digits to make a local phone call, do not use this home area code feature. If you do, you cannot place local calls from your caller ID log, as they will have only seven digits.

To set the home area code:

1. Press MENU/SELECT in idle mode to enter the main menu.
2. Press qCID or pDIR to scroll to Settings, then press MENU/SELECT.

CID time sync >Home area code

3. Press qCID or pDIR to scroll to Home area code, then press MENU/SELECT. The screen briefly shows Only for 7digit dial from CID.
4. Use the dialing keys to enter a three-digit home area code.

HOME AREA CODE ___

ff Press MUTE/DELETE to delete a digit.

ff Press and hold MUTE/DELETE to delete all digits. 5. Press MENU/SELECT to save. There is a confirmation tone and the screen
shows Area code will not show in CID briefly before returning to the previous menu.

Note: If in the future, your telephone service provider requires you to dial 10 digits to make a local call (area code plus telephone number), you need to delete your home area code and dial out locally from the call ID log. With the home area code displayed, press and hold MUTE/DELETE until the digits are deleted, and then press MENU/SELECT. The home area code is restored to its default setting of _ _ _ (empty).

Telephone settings
Handset settings

Dial mode

The dial mode is preset to tone dialing. If you have pulse (rotary) service, you must change the dial mode to pulse dialing before using the telephone.

To set the dial mode:
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Press qCID or pDIR to scroll to Settings, then press MENU/SELECT.
3. Press qCID or pDIR to scroll to Dial mode, then press MENU/SELECT.
4. Press qCID or pDIR to select Touch-tone or Pulse, then press MENU/SELECT. The screen shows DIAL MODE is touch-tone or DIAL MODE is pulse. There is a confirmation tone and the screen returns to the previous menu.

Home area code >Dial mode
DIAL MODE >Touch-tone

Web address
Use this feature to view the AT&T website address.
1. Press MENU/SELECT in idle mode to enter the main menu. 2. Press qCID or pDIR to scroll to Web address, then press
MENU/SELECT.

Settings >Web address
www.telephones. att.com

Telephone settings
Handset settings
QUIET mode When QUIET mode is turned on, the telephone silences all sounds during the set period of time (1-12 hours). However, the handset locator paging tone and any sound-generating operations initiated by users, such as making calls using the speakerphone or setting ringer volume, will sound as normal. After you turn on QUIET mode, this feature activates immediately and the answering system turns on automatically. When QUIET mode is on, the answering system takes calls and records messages without broadcasting them. To turn QUIET mode on: 1. Press and hold QUIET # in idle mode to enter the QUIET mode setting
screen. The screen shows Quiet: _ _ hours (1-12 hours). 2. Use the dialing keys to enter the desired number of hours (1-12) you would
like to turn on QUIET mode, then press MENU/SELECT. Your screen briefly shows Answering sys is ON and then Quiet mode on. To turn QUIET mode off: ff While QUIET mode is on, press and hold QUIET #. The screen then shows Quiet mode is off and you hear a confirmation tone.
Notes: ff If you change the base ringer, handset ringer, ringer volume, key tone, or caller ID announce features when QUIET mode
is on, the sample plays but the feature is still muted after saving the setting. ff After QUIET mode is turned off or the set period of time has expired, all muted features will be activated again. ff The PTT function is not available when QUIET mode is on. ff When QUIET mode is on, the handset does not ring when there is an incoming intercom call, but the handset which
initiates the intercom call does have the calling tone as normal. ff When QUIET mode is on, and Smart call blocker is on and in screening mode, all screened calls will be sent to the
answering system after screening. For more information on Smart call blocker, see page 77.
28

Telephone settings
Telephone base settings
Use the menu to change the telephone settings.
1. Press MENU/SELECT on the telephone base when it is not in use to enter the main menu.
2. Press qCID or pDIR to scroll to the feature to be changed. When scrolling through the menu, the > symbol indicates the selected menu item.
3. Press MENU/SELECT to select the highlighted item.

>Play messages p

Answering sys

Note: Press CANCEL to cancel an operation, back up to the previous menu or exit the menu display. Press and hold CANCEL to return to idle mode.

Telephone settings
Telephone base settings

Ringer volume You can set the ringer volume level to one of six levels or turn the ringer off. When the ringer is off, appears on the screen.

1. Press MENU/SELECT in idle mode to enter the main menu.
2. Press qCID or pDIR to scroll to Ringers, then press MENU/SELECT.
3. Press MENU/SELECT again to select Ringer volume. 4. Press qCID or pDIR to sample each volume level.
5. Press MENU/SELECT to save your preference. There is a confirmation tone and the screen returns to the previous menu.

Intercom

>Ringers

>Ringer volume p

Ringer tone

RINGER VOLUME p
q

Notes: ff The telephone base ringer volume also determines the ringer volume for intercom calls. ff If the ringer volume is set to off, the telephone base is silenced for all incoming calls. ff If the ringer volume is set to off, the caller ID will not be announced and the screen will briefly display Caller ID
won’t be announced.

Ringer tone

You can choose one of ten ringer tones.
Ringer volume p
1. Press MENU/SELECT in idle mode to enter the main menu. >Ringer tone q 2. Press qCID or pDIR to scroll to Ringers, then press
MENU/SELECT.

3. Press qCID or pDIR to scroll to Ringer tone, then press RINGER TONE p

MENU/SELECT.

>Tone 1

4. Press qCID or pDIR to sample each ringer tone.

5. Press MENU/SELECT to save your preference. There is a confirmation tone and the screen returns to the previous menu.

Note: If you turn off the ringer volume, you will not hear ringer tone samples.

Telephone settings
Telephone base settings

Set date/time

To set the date and time manually:

1. When the telephone base is in idle mode, press MENU/SELECT to enter the main menu.
2. Press qCID or pDIR to scroll to Set date/time and then press MENU/SELECT.

Ringers

>Set date/time

3. Press qCID or pDIR to choose the month, then press MENU/SELECT, or enter the number using the dialing keys.

SET DATE

MM/DD/YY

4. Press qCID or pDIR to choose the day, then press MENU/SELECT, or enter the number using the dialing keys.

SET TIME

HH:MM —

5. Press qCID or pDIR to choose the year, or enter the number using the dialing keys, then press MENU/SELECT to move on to set the time.

6. Press qCID or pDIR to choose the hour, then press MENU/SELECT, or enter the number using the dialing keys.

7. Press qCID or pDIR to choose the minute, then press MENU/SELECT, or enter the number using the dialing keys.

8. Press qCID or pDIR to highlight AM or PM, or press 2 for AM or 7 for PM. Then, press MENU/SELECT to confirm. There is a confirmation tone and the screen returns to the previous menu.

Note: If the clock is not set when a message is recorded, the system announces, “Time and day not set,” before it plays the message.

Telephone settings
Telephone base settings

LCD language

You can select the language used for all screen displays.

1. Press MENU/SELECT in idle mode to enter the main menu.
2. Press qCID or pDIR to scroll to Settings, then press MENU/SELECT.

>LCD language p Caller ID annc q

3. Press MENU/SELECT to choose LCD language.

LCD LANGUAGE p

4. Press qCID or pDIR to highlight English, Français

>English

or Español, then press MENU/SELECT. The screen

prompts Set English/Français/Español as LCD

language?.

5. Press MENU/SELECT to confirm. There is a confirmation tone and the

screen returns to the previous menu.

Note: If you accidentally change the LCD language to French or Spanish, you can reset it back to English without going through the French or Spanish menus. Press MENU/SELECT on the telephone base, then enter 364#. There is a confirmation tone.

Telephone settings
Telephone base settings

Caller ID announce

To turn on or off the caller ID announce feature:

1. Press MENU/SELECT in idle mode to enter the main menu.
2. Press qCID or pDIR to scroll to Settings, then press MENU/SELECT.

LCD language p >Caller ID annc q

3. Press qCID or pDIR to scroll to Caller ID annc, then

CALLER ID ANNC p

press MENU/SELECT.

>Set all On/Off q

4. Press qCID or pDIR to scroll to the desired option, then press MENU/SELECT.

ff Set all On/Off – Change the setting for the base and all handsets.

Notes:
ff To use the caller ID announce feature, you must subscribe to caller ID service from your telephone service provider.
ff If you have paired an AT&T TL80133 DECT 6.0 cordless speakerphone to the telephone base, the caller ID announce setting for all devices also applies to the cordless speakerphone. When the setting is On, the cordless speakerphone speaks “Call from…” and the name of the caller based on the directory or caller ID information during an incoming call. If the caller’s name is unavailable, the phone number up to the last 11 digits will be announced.
ff This feature does not announce information for call waiting calls.
ff It takes at least 2 rings for the phone to receive caller ID information and announce it. If the phone is answered before the end of the second ring, the phone won’t have time to announce the caller’s information.
ff Pronunciation of names may vary with this feature. Not all names may be pronounced correctly.
ff Caller ID announce is available in English only.

Telephone settings
Telephone base settings

Set speed dial voicemail number

This feature lets you save your voicemail number for easy access when you press and hold the 1 key.

1. Press MENU/SELECT in idle mode to enter the main menu. Caller ID anncp

2. Press qCID or pDIR to scroll to Settings, then press

>Voicemail # q

MENU/SELECT.

3. Press qCID or pDIR to scroll to Voicemail #, then press MENU/SELECT.
4. Use the dialing keys to enter the voicemail access number provided by your telephone service provider. ff Press qCID or pDIR to move the cursor to the left or right.

VOICEMAIL # 800-222-3111_

ff Press MUTE/DELETE to erase a digit.

ff Press and hold MUTE/DELETE to erase all digits.

ff Press REDIAL/PAUSE to enter a three-second dialing pause (a p appears). 5. Press MENU/SELECT to save. There is a confirmation tone. The screen
displays Voicemail # saved and then returns to the previous menu.

BASE

New voicemail

MSG #
1 10:21PM

08/08

Notes: ff This feature does not indicate new messages recorded on your phone’s built-in answering system. ff For more information about the difference between your answering system and voicemail, see page 114.

Telephone settings
Telephone base settings

Clear voicemail indicator

Voicemail #

>Clr voicemail q

Reset Voicemail Indicator?

To manually turn off the new voicemail indicators:

1. Press MENU/SELECT when in idle mode to enter the main menu. 2. Press qCID or pDIR to scroll to Settings, then press MENU/SELECT. 3. Press qCID or pDIR to scroll to Clr voicemail, then press MENU/SELECT.
The screen shows Reset Voicemail Indicator?. 4. Press MENU/SELECT again to turn the voicemail indicator off. There is a
confirmation tone and the screen returns to the previous menu.

Rename base

You can create a new name for the telephone base.

1. When the telephone is idle, press MENU/SELECT.
2. Press qCID or pDIR to scroll to Settings, then press MENU/SELECT.

Clr voicemail p

>Rename base

3. Press qCID or pDIR to scroll to Rename base, then press MENU/SELECT.
4. Change the telephone base name when prompted. ff Press qCID or pDIR to move the cursor to the left or right.

RENAME BASE BASE_________

ff Use the dialing keys to enter a name (up to 11 characters). Each time you press a key, a character on that key appears. Additional key presses produce other characters on that key. See the chart on page 60.

ff Press MUTE/DELETE to backspace and delete a character.

ff Press and hold MUTE/DELETE to delete all characters.

5. Press MENU/SELECT to save the setting and return to the previous menu. There is a confirmation tone.

Telephone settings
Telephone base settings

Key tone

The telephone base is set to beep with each key press. You can adjust the key tone volume or turn it off. If you turn off the key tone, there are no beeps
when you press keys.

1. Press MENU/SELECT in idle mode to enter the main menu.

2. Press qCID or pDIR to scroll to Settings, then press MENU/SELECT.
3. Press qCID or pDIR to scroll to Key tone, then press MENU/SELECT.

Rename base

>Key tone

4. Press qCID or pDIR to select the desired volume or Off.

KEY TONE
q

5. Press MENU/SELECT to save your preference. There is a confirmation tone and the screen returns to the previous menu.

Use caller ID to automatically set date and time

If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. Follow the steps below to turn the CID time sync feature on or off. The default setting is On.

1. When the telephone base is in idle mode, press MENU/SELECT to enter the main menu.
2. Press qCID or pDIR to scroll to Settings, then press MENU/SELECT.
3. Press qCID or pDIR to scroll to CID time sync, then press MENU/SELECT.
4. Press qCID or pDIR to highlight On or Off, then press MENU/SELECT to save. There is a confirmation tone and the screen returns to the previous menu.

Key tone

>CID time sync q

CID TIME SYNC p

>On

Telephone settings
Telephone base settings

Home area code

If you dial 7 digits to make a local call (no area code required), enter your area code into the telephone as the home area code. When you receive a call from within your home area code, the caller ID log only displays the 7 digits of the telephone number.

This feature makes it easy for you to place a call from the caller ID log. If you dial 10 digits to make a local phone call, do not use this home area code feature. If you do, you cannot place local calls from your caller ID log, as they will have only 7 digits.

To set the home area code:

1. Press MENU/SELECT in idle mode to enter the main menu.
2. Press qCID or pDIR to scroll to Settings, then press MENU/SELECT.

CID time sync p >Home area code q

3. Press qCID or pDIR to scroll to Home area code, then press MENU/SELECT. The screen briefly shows Only for 7digit dial from CID.

HOME AREA CODE ___

4. Use the dialing keys to enter a three-digit home area code.

ff Press MUTE/DELETE to delete a digit.

Note: If in the future, your telephone service provider requires you to dial 10 digits to make a local call (area code plus telephone number), you need to delete your home area code and dial out locally from the caller ID log. With the home area code displayed, press and hold MUTE/DELETE until the digits are deleted, and then press MENU/SELECT. The home area code is now restored to its default setting of _ _ _ (empty).

Telephone settings
Telephone base settings

Dial mode

The dial mode is preset to tone dialing. If you have pulse (rotary) service, you must change the dial mode to pulse dialing before using the telephone.

Home area code p

>Dial mode

To set the dial mode:

1. Press MENU/SELECT in idle mode to enter the main menu.

DIAL MODE

2. Press qCID or pDIR to scroll to Settings, then press

>Touch-tone

MENU/SELECT.

3. Press qCID or pDIR to scroll to Dial mode, then press MENU/SELECT.

4. Press qCID or pDIR to select Touch-tone or Pulse, then press

MENU/SELECT. The screen shows DIAL MODE is touch-tone or DIAL MODE

is pulse. There is a confirmation tone and the screen returns to the previous

menu.

Web address
Use this feature to view the AT&T website address.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Press qCID or pDIR to scroll to Web address, then press MENU/SELECT.

Settings

>Web address

www.telephones. att.com

Telephone operation
Telephone operation

Making a call

Using a cordless handset:

ff Press PHONE/FLASH or /SPEAKER, then enter the telephone number.

The screen displays the elapsed time as you talk (in hours, minutes and seconds).

Elapsed time
Phone 0:00:30

Using the telephone base: ff Lift the corded handset or press
enter the telephone number.

/SPEAKER, then

The screen displays the elapsed time as you talk (in hours, minutes and seconds).

fffff
6:30AM

8/06

Elapsed time Speaker 0:00:30

Note: Pressing PHONE/FLASH or /SPEAKER to access services from your telephone service provider does not affect the elapsed time.

06:30 PM 8/06

On hook dialing (predialing)
Using a cordless handset: 1. Enter the telephone number. Press MUTE/DELETE to make corrections
when entering the phone number. 2. Press PHONE/FLASH or /SPEAKER.
Using the telephone base: 1. Enter the telephone number. Press MUTE/DELETE to make corrections
when entering the phone number. 2. Press /SPEAKER, or lift the corded handset.

Answering a call

Using a cordless handset: ff Press PHONE/FLASH or /SPEAKER.
-ORff Press any dialing key (0-9, TONE or #).

Using the telephone base: ff Lift the corded handset, or press
-ORff Press any dialing key (0-9, TONE

/SPEAKER. or #).

Note: Smart call blocker is set to on by default. If your directory, allow list, star name list, and block list are empty, all calls will be classified as unknown calls. The telephone will screen all calls and ask callers to announce their names and press the pound key (#) before the calls ring on your telephone. We recommend that you set up your directory, allow list, star name list, and block list before using your telepone with the Smart call blocker feature. See About Smart call blocker on page 77.
39

Telephone operation
Telephone operation

Ending a call Using a cordless handset: ff Press OFF/CANCEL or return the handset to the charger. Using the telephone base: ff Return the corded handset to the telephone base, or press

/SPEAKER.

Auto off A call ends automatically when you put the cordless handset in the charger.

Temporary ringer silencing

Using a cordless handset:
Press OFF/CANCEL or MUTE/DELETE while the telephone is ringing to silence the ringer temporarily on that handset only. This turns off the ringer without disconnecting the call. The next incoming call rings normally at the preset volume.

Ringer muted

Using the telephone base:

Ringer muted

Press CANCEL or MUTE/DELETE while the telephone is
ringing to silence the ringer temporarily on the telephone base only. This turns off the ringer without disconnecting
the call. The next incoming call rings normally at the preset volume.

Note: The telephone base and all handsets ring when there is an incoming call unless the ringer volume is turned off on that device.

Telephone operation
Telephone operation
Handset speakerphone
During a call, press /SPEAKER to switch between handsfree speakerphone and normal handset use. Press OFF/CANCEL to hang up.
Notes:
ff When you use the speakerphone, the key pad of the handset and the /SPEAKER button are lit. ff The speakerphone uses more power than the normal handset. If the handset battery becomes very low while you are
using the speakerphone, the call remains in speakerphone mode until you hang up or the battery becomes depleted. ff After installing a battery into the handset, the screen may show Low battery. If you use the speakerphone at this time,
the battery may become depleted. Follow the battery charging instructions in the Battery installation and charging section on pages 10-11.

Last number redial

Each handset and the telephone base stores the last 10 telephone numbers dialed (up to 30 digits each).

To view the 10 most recently dialed numbers:
Using a cordless handset:
ff To display the most recently called number, press REDIAL/PAUSE.
ff To view up to 10 recently called numbers, press REDIAL/PAUSE, then qCID, pDIR or REDIAL/PAUSE repeatedly.

Redial #1/10 888-883-2445
fffff

The handset beeps twice at the end of the list. Press OFF/CANCEL to exit.

Using the telephone base:
ff To display the most recently called number, press REDIAL/PAUSE.
ff To view up to 10 recently called numbers, press REDIAL/PAUSE, then qCID, pDIR or REDIAL/PAUSE repeatedly.
The telephone base beeps twice at the end of the list. Press CANCEL to exit.

REDIAL #1/10 p 888-883-2445 q
fffff

Telephone operation
Telephone operation
To redial a number: Using a cordless handset: ff To dial the displayed number, press PHONE/FLASH or /SPEAKER.
-ORff Press PHONE/FLASH or /SPEAKER, then press REDIAL/PAUSE
repeatedly to view the redial memory. Press MENU/SELECT to dial the displayed number. Using the telephone base: ff To dial the displayed number, lift the corded handset or press /SPEAKER. -ORff Lift the corded handset or press /SPEAKER. Then, press REDIAL/PAUSE repeatedly to view the redial memory. Press MENU/SELECT to dial the displayed number.
To delete a redial entry: Using a cordless handset or the telephone base: ff While the screen displays the desired number, press MUTE/DELETE to
delete the number from the redial memory.
Equalizer The handset and base equalizers enable you to change the quality of the audio to best suit your hearing. Using a cordless handset or the telephone base: 1. While on an outside call or intercom call, press MENU/SELECT. 2. Press MENU/SELECT to select Equalizer. 3. Press qCID or pDIR to select Treble 1, Treble 2, Bass or Natural (the
default setting), then press MENU/SELECT to store the setting.
Notes: ff If you switch the call between the handset and the speakerphone by pressing /SPEAKER, the audio setting
remains unchanged. ff The current equalizer setting remains unchanged until a new setting is selected.
42

Telephone operation
Options while on calls
Volume control Using a cordless handset: You can set the listening volume to one of six levels. While on a call, press qCID/VOLUME to decrease or press pDIR/VOLUME to increase the listening volume. Using the telephone base: You can set the listening volume to one of eight levels. While on a call, press qVOL to decrease or pVOL to increase the listening volume.
Notes: ff Handset and speakerphone volume settings are independent. ff When the volume reaches the minimum or maximum setting, you hear two beeps.
Call waiting If you subscribe to call waiting service from your telephone service provider, and someone calls while you are already on a call, you hear two beeps. ff Press PHONE/FLASH on the handset or FLASH/PTT on the telephone base
to put your current call on hold and take the new call. ff Press PHONE/FLASH on your handset or FLASH/PTT on the telephone
base at any time to switch back and forth between calls.
Note: ff If the Smart call blocker feature is on and in screening mode, and you receive a call waiting call:
– If you have already picked up a screened call, the telephone checks whether the call waiting call’s number can be found in the directory, block list or allow list. It also checks whether the caller name is in the star name list. After that, the telephone displays the caller ID information or Blocked call accordingly. You can press PHONE/FLASH or
/SPEAKER to take the new call, or press CALL BLOCK on the handset or telephone base to block it. – If the telephone is screening a call, the call waiting call will be ignored and logged as missed call in the caller ID log.
43

Telephone operation
Options while on calls

Mute
Use the mute function to turn off the microphone. You can hear the caller, but the caller cannot hear you.
To mute a call: ff While on a call, press MUTE/DELETE on the handset
or the telephone base. When mute is on, the handset or telephone base shows Muted for a few seconds. The MUTE icon displays on the handset screen or the MUTE/DELETE button lights up on the base until you turn it off.
To end mute a call: ff Press MUTE/DELETE again. When mute is off,
Microphone ON appears temporarily on the handset or telephone base.

Chain dialing

Use this feature to initiate a dialing sequence from the numbers in the directory, caller ID log or redial memory while you are on a call.

Chain dialing is useful when you wish to access other numbers (such as bank account numbers or access codes) from the directory, caller ID log or redial list.

Using a cordless handset:
To access the directory while on a call:
1. Press MENU/SELECT. 2. Press qCID or pDIR to scroll to Directory and then press
MENU/SELECT. 3. Press qCID or pDIR to scroll to the desired number. 4. Press MENU/SELECT to dial the number shown.

Intercom >Directory
Charlie Johnson 888-883-2445

To access the caller ID log while on a call:
1. Press MENU/SELECT. 2. Press qCID or pDIR to scroll to Caller ID log, then press
MENU/SELECT. 3. Press qCID or pDIR to scroll to the desired number. 4. Press MENU/SELECT to dial the number shown.

Phone 0:01:20 Charlie Johnson
6:30AM 8/06

To access the redial list while on a call:
1. Press REDIAL/PAUSE to show the most recently dialed number.
2. Press qCID or pDIR to scroll to the desired number, or press REDIAL/PAUSE repeatedly to find the desired number. Then, press MENU/SELECT to dial the number shown.
44

REDIAL #1/10 800-360-4121

Telephone operation
Options while on calls

Using the telephone base: To access the directory while on a call: 1. Press MENU/SELECT. 2. Press qCID or pDIR to scroll to Directory and then
press MENU/SELECT. 3. Press qCID or pDIR to scroll to the desired number.
4. Press MENU/SELECT to dial the number shown.

Intercom

>Directory

Charlie Johnson p 888-883-2445 q

Speaker 0:01:20 Charlie Johnson

06:30 AM 8/06

To access the caller ID log while on a call:
1. Press MENU/SELECT. 2. Press qCID or pDIR to scroll to Caller ID log, then press MENU/SELECT. 3. Press qCID or pDIR to scroll to the desired number. 4. Press MENU/SELECT to dial the number shown.

To access the redial list while on a call:

1. Press REDIAL/PAUSE to show the most recently dialed number.

REDIAL

#1/10 p

800-360-4121q

2. Press qCID or pDIR to scroll to the desired number, or press REDIAL/PAUSE repeatedly to find the desired number. Then, press MENU/SELECT to dial the number shown.

Notes:
ff You cannot edit a directory entry while on a call. For more details about the directory, see the Directory section starting on page 58.
ff You cannot copy a caller ID entry into the directory while on a call. For more details about the caller ID log, see page 69.
ff If you press REDIAL/PAUSE while on a call, you can only view the 10 most recently dialed numbers and you cannot erase the entries. For more details about the redial memory, see page 41.
ff Press OFF/CANCEL on the handset or CANCEL on the telephone base to exit redial, directory or caller ID log when
on a call.

Temporary tone dialing If you have pulse (rotary) service only, you can switch from pulse to touch-tone dialing temporarily during a call. This is useful if you need to send touch-tone signals to access your telephone banking or long distance services.
1. During a call, press TONE . 2. Use the dialing keys to enter the desired number. The telephone sends
touch-tone signals. 3. The telephone automatically returns to pulse dialing after you end the call.
45

Telephone operation
Options while on calls

Blind transfer

While on an outside call, you can transfer the call to a specific device or any device without notifying them.

To transfer an outside call from a handset:

1. During the call, press MENU/SELECT. 2. Press qCID or pDIR to scroll to Transfer, then press
MENU/SELECT.

Phone 0:00:12

ff If you have one handset and no other registered devices, the outside call is put on hold and your handset shows Transferring call…. The telephone base rings and shows Transfer from HANDSET X.

6:30AM

8/06

>Equalizer Transfer

ff If you have other registered device(s) or more than one

handset, your screen shows TRANSFER TO:. Use the

dialing keys to enter a specific device number (0 for the

telephone base, 1-9 for handsets 1-9, TONE followed

TRANSFER TO:

by 0-2 for handsets 10-12, or TONE followed by # for all >HANDSET 2

devices), or press qCID or pDIR to scroll to the desired

device and press MENU/SELECT. The outside call is put

on hold and your handset screen shows Transferring

call… or Transferring call to all…. The other device rings and shows

Transfer from HANDSET X (HANDSET represents the handset name, X

represents the handset number).

3. To answer the call on the destination handset, press PHONE/FLASH or /SPEAKER. To answer the call on the telephone base, lift the corded handset or press /SPEAKER. The initiating handset shows Call transferred and goes to idle mode.

Telephone operation
Options while on calls

To transfer an outside call from the telephone base:

1. During the call, press MENU/SELECT. 2. Press qCID or pDIR to scroll to Transfer, then press

Speaker 0:00:12

MENU/SELECT.

06:30 AM 8/06

ff If your have one handset and no other registered

devices, the outside call is put on hold and the

>Equalizer

telephone base shows Transferring call…. The

Transfer

handset rings and shows Transfer from BASE 0

(BASE represents the base name).

ff If you have other registered device(s) or more than one handset, the telephone base shows TRANSFER

TRANSFER TO: p

>HANDSET 2

TO:. Use the dialing keys to enter a specific handset

number (1-9 for handsets 1-9, TONE followed by

0-2 for handsets 10-12, or TONE followed by # for all handsets), or press qCID or pDIR to scroll to the desired handset and press

MENU/SELECT. The outside call is put on hold and the telephone base

shows Transferring call… or Transferring call to all…. The other

handset(s) rings and shows Transfer from BASE 0 (BASE represents the

base name).

3. To answer the call on the destination handset, press PHONE/FLASH or /SPEAKER. The telephone base shows Call transferred and goes to
idle mode.

Notes:
ff To cancel the transfer and return to the external call before the blind transfer call is answered, press OFF/CANCEL, PHONE/FLASH or /SPEAKER on your handset, or CANCEL or /SPEAKER on your telephone base.
ff If the other device does not answer the transfer within 30 seconds, the transfer ends and the initiating device rings while showing No response to transfer. If it does not pick up within 30 seconds, the device returns to idle mode and the outside call ends.

Multiple handset use
Multiple handset use
Handset locator
The handset locator feature is useful if you misplace any handsets.
To start the paging tone: ff Press /FIND HS on the telephone base to
start the paging tone on all handsets for 60 seconds.
Note: If you press OFF/CANCEL or MUTE/DELETE on a handset, the ringer of that handset stops, but the paging to the rest of the handsets continues.
To stop the paging tone: ff Press PHONE/FLASH, /SPEAKER, or any
dialing key (0-9, TONE or #) on the handset(s). -ORff Press /FIND HS, MUTE/DELETE or CANCEL on the telephone base.

** Paging **

Join a call in progress
When a handset or the telephone base is already on a call and you would like to join the call, press PHONE/FLASH or /SPEAKER on your handset or
/SPEAKER on your telephone base, or lift the corded handset.
To end the call using a cordless handset, press OFF/CANCEL or place the handset in the charger. To end the call using the telephone base, press
/SPEAKER or return the corded handset to the telephone base. The call does not end until all handsets and the telephone base hang up.
Note: You can use up to four system handsets and the telephone base at the same time on an outside call.

Multiple handset use
Intercom

Use the intercom feature for conversations between two handsets, a handset and the telephone base, or a handset/telephone base and a cordless headset/speakerphone (sold separately). You can buy additional expansion handsets (model AT&T CL80107), cordless headsets and speakerphones for this telephone base to expand your telephone system (up to 12 handsets or 10 cordless handsets and two cordless headsets/speakerphones).

Using a cordless handset:

1. Press MENU/SELECT in idle mode to enter the main menu. Press qCID or pDIR to scroll to Intercom, then press
MENU/SELECT.

Calling BASE 0

ff If you have one handset and no other registered devices, the handset shows Calling base.

ff If you have other registered device(s) or more than one handset, the handset shows INTERCOM TO:. Use the dialing keys to enter a specific device number (0 for the telephone base, 1-9 for handsets 1-9, TONE followed by 0-2 for handsets 10-12, # for a single headset/ speakerphone, # followed by 1 or 2 for headset/ speakerphone 1 or 2, or TONE followed by # for all devices), or press qCID or pDIR to scroll to the desired device and press MENU/SELECT. Your handset screen shows Calling HANDSET X, Calling BASE 0, Calling headset or Calling all devices.

HANDSET X is calling
Intercom 11:35AM 12/02

The destination device(s) rings and shows HANDSET is calling, HANDSET X is calling or HANDSET X is calling all (HANDSET represents the handset name, X represents the handset number).

2. To answer the intercom call, press PHONE/FLASH, /SPEAKER or any
dialing key (0-9, TONE , or #) on the called device. On the called telephone base, press /SPEAKER or any dialing key (0-9, TONE , or #), or lift the corded handset. Both devices now show Intercom.

3. To end the intercom call, one party presses OFF/CANCEL or places the cordless handset back in the charger, presses CANCEL on the telephone base, or hangs up the corded handset. The other party hears four beeps. Both devices display Intercom ended.

Using the telephone base:

1. When the telephone base is not in use, press
MENU/SELECT in idle mode to enter the main menu, then press qCID or pDIR to scroll to Intercom and
press MENU/SELECT.

Calling HANDSET X

ff If you have one handset and no other registered devices, the telephone base shows Calling HANDSET X.

Multiple handset use
Intercom

ff If you have other registered device(s) or more than one handset, the telephone base shows INTERCOM TO:. Use the dialing keys to enter a specific handset number (1-9 for handsets 1-9, TONE followed by 0-2 for handsets 10-12, # for a single headset/speakerphone, # followed by 1 or 2 for headset/speakerphone 1 or 2, or TONE followed by # for all devices), or press qCID or pDIR to scroll to the desired handset and press MENU/SELECT. The telephone base shows Calling HANDSET X or Calling all handsets.

The destination handset(s) rings and shows Base is calling, BASE 0 is calling or BASE 0 is calling all.

BASE 0 is calling

2. To answer the intercom call, press PHONE/FLASH,
/SPEAKER or any dialing key (0-9, TONE , or #) on the destination handset. Both the base and the handset now show Intercom.

Intercom

3. To end the intercom call, one party presses

OFF/CANCEL or places the cordless handset back in

10:01PM 10/15

the charger, presses CANCEL on the telephone base,

or hangs up the corded handset. The other party hears four beeps. Both

devices display Intercom ended.

Notes:
ff Before the intercom call is answered, you can cancel it by pressing OFF/CANCEL on the handset or CANCEL on the telephone base.
ff If the called device is not answered within 100 seconds, or if it is in use, on a call or out of range, the initiating device shows No answer. Try again..
ff To temporarily silence the intercom ringer, press OFF/CANCEL or MUTE/DELETE on the handset, or press CANCEL or MUTE/DELETE on the telephone base.
ff You can only use one pair of devices at a time to make intercom calls. ff For cordless headsets and speakerphones, refer to the corresponding user’s manual on how to answer and end an
intercom call.
ff If a total of two cordless headset(s) and/or speakerphone(s) are registered to the telephone base, they appear as HEADSET 1 and HEADSET 2, respectively, in the intercom menu.

Answer an incoming call during an intercom call
If you receive an outside call during an intercom call, there is a two-beep call waiting tone.
ff To answer the call, press PHONE/FLASH on the cordless handset. You can also lift the corded handset or press /SPEAKER on the telephone base. The intercom call ends automatically. The party on the intercom call hears four beeps. Other system devices can also answer the incoming call by pressing PHONE/FLASH or /SPEAKER on the handset, or pressing /SPEAKER or lifting the corded handset on the telephone base.
ff To end the intercom call without answering the incoming call, press OFF/CANCEL on the handset or CANCEL on the telephone base. You can
also return the corded handset back to the telephone base.
Note: For cordless headsets and speakerphones, refer to the corresponding user’s manual on how to answer an incoming call during an intercom call.
50

Multiple handset use
Call transfer using intercom

Use the intercom feature to transfer an outside call to another system handset or the telephone base. You can also share an outside call with another system handset or the telephone base.

To transfer or share an outside call using intercom:

Using a cordless handset:

1. During the call, press MENU/SELECT.

2. Press qCID or pDIR to scroll to Intercom and press MENU/SELECT.

3. Choose the device(s) you would like to transfer the call to using the options from Step 1 on page 49.

4. When the destination device picks up, your handset shows Intercom and the outside call is put on hold. You have the following options:

ff You can transfer the call. Press MENU/SELECT, then press qCID or pDIR to scoll to Transfer. Press MENU/SELECT again. The handset shows Call transferred. The other device automatically connects to the outside call.

>Equalizer Transfer

ff You can let the other device join you on the outside call in a three-way conversation. Press MENU/SELECT. Press qCID or pDIR to highlight Share call, then press MENU/SELECT.

ff You can end the intercom call and continue the outside call with your handset. Press PHONE/FLASH on your handset (the ended intercom call party hears four beeps).

Using the telephone base: 1. During the call, press MENU/SELECT. Press qCID or pDIR to scroll to
Intercom, then press MENU/SELECT.

2. Choose the handset(s) you would like to transfer the call to using the options from Step 1 on pages 49-50.

3. When the destination handset(s) picks up, the telephone base shows

Intercom and the outside call is put on hold. Then, you have the following

options:

ff You can transfer the call. Press MENU/SELECT, then press qCID or pDIR to scoll to Transfer. Press

>Equalizer Transfer

p q

MENU/SELECT again. The telephone base shows

Call transferred. The other handset automatically

connects to the outside call.

ff You can let the other handset join you on the outside call in a three-way conversation. Press MENU/SELECT. Press qCID or pDIR to highlight Share call, then press MENU/SELECT.
ff You can end the intercom call and continue the outside call with the telephone base. Press CANCEL on the telephone base (the ended intercom call party hears four beeps).

Multiple handset use
Push-to-talk (PTT)

You can directly broadcast messages to the

PTT

speakerphone of any device. Press and hold

PUSH TO TALK on a handset or FLASH/PTT on the

telephone base to begin two-way communication.

ff While talking to another device, Press and hold PUSH TO TALK on the handset or FLASH/PTT on the telephone base and release when you are finished speaking, so that the other person can respond.
ff Only one device can talk at a time.
ff Only one PTT session can be active at a time.
ff While PTT is in use between two devices, other devices cannot use the intercom feature but can access the answering system.
ff When you attempt to place a PTT call to another device which is accessing the answering system or on an intercom call or outside call, your device screen shows Not available at this time.

Turn PTT on or off

Using a cordless handset:

1. Press PUSH TO TALK when the handset is not in use. The PUSH TO TALK menu displays.
2. Press qCID or pDIR to highlight PTT On/Off, then press MENU/SELECT.

PUSH TO TALK >PTT On/Off
fffff

3. Press qCID or pDIR to choose On or Off, then press MENU/SELECT.

Using the telephone base:

1. Press FLASH/PTT when the telephone base is not in use. The PUSH TO TALK menu displays.
2. Press qCID or pDIR to highlight PTT On/Off, then press MENU/SELECT.

PUSH TO TALK p

>PTT On/Off

fffff

3. Press qCID or pDIR to choose On or Off, then press MENU/SELECT.

Note: The handset or the telephone base screen displays No Incoming PTT when PTT is turned off.

Multiple handset use
Push-to-talk (PTT)

PTT call to a single device

Using a cordless handset:

1. There are a few ways to begin a PTT call to a single device. When the handset is not in use:
ff If you have one handset, press and hold PUSH TO TALK. ff If you have more than one handset:

PUSH TO TALK

>HANDSET

fffff

w Press PUSH TO TALK on the handset. Then, use the dialing keys to enter the destination device number.
-ORw Press PUSH TO TALK on the handset. Press qCID or
pDIR to highlight the destination device number, then press MENU/SELECT or PUSH TO TALK.
The handset shows Connecting to HANDSET X… (HANDSET represents the handset name, X represents the destination handset number) or Connecting to BASE 0… (BASE represents the base name) for a few seconds. When the connection is made, both your and the destination device screens display Press and hold [PTT] to talk.

Connecting to HANDSET X…
fffff
Press and hold [PTT] to talk fffff

2. Press and hold PUSH TO TALK. A chirp indicates your microphone is on. Speak towards the device. Your voice is broadcast to the destination device.
While you are speaking, your handset shows PTT To handset: X or PTT To base.

PTT To handset: X
fffff

3. Release PUSH TO TALK after speaking. Both devices beep once again and the screens show Press and hold [PTT] to talk, then, you can press and hold PUSH TO TALK to continue speaking or the destination device can respond (see Answer a PTT call on page 56).
4. To end the PTT call, press OFF/CANCEL or place the cordless handset in the charger. The handset shows Push to talk Ended for a few seconds.

Multiple handset use
Push-to-talk (PTT)

Using the telephone base:

1. There are a few ways to begin a PTT call to a single handset. When the telephone base is not in use:

ff If you have one handset, press and hold FLASH/PTT.

ff If you have more than one handset: w Press FLASH/PTT, then, use the dialing keys to enter the destination handset number.
-OR-

PUSH TO TALK p

>HANDSET

fffff

w Press qCID or pDIR to highlight the destination handset number, then press MENU/SELECT or FLASH/PTT.
The telephone base shows Connecting to HANDSET X… (HANDSET represents the handset name, X represents the destination handset number) for a few seconds. When the connection is made, both the telephone base and destination handset display Press and hold [PTT] to talk.

Connecting to HANDSET X…
fffff
Press and hold [PTT] to talk
fffff

2. Press and hold FLASH/PTT. A chirp indicates your microphone is on. Speak towards the telephone base. Your voice is broadcast to the destination handset.
While you are speaking, the telephone base shows PTT To handset: X.

PTT To handset: X
fffff

3. Release FLASH/PTT after speaking. Both devices beep once again and the screens show Press and hold [PTT] to talk. Then, you can press and hold FLASH/PTT to continue speaking or the destination device can respond (see Answer a PTT call on page 56).
4. To end the PTT call, press CANCEL. The telephone base shows Push to talk Ended for a few seconds.

Multiple handset use
Push-to-talk (PTT)
PTT call to multiple devices
When there are multiple handsets registered to the phone system, PTT supports one-to-group calls. PTT supports a maximum of one-to-five calls when one to five handsets are registered, and a maximum of one-to-four calls when six or more handsets are registered. The first four registered handsets will be eligible to use this feature. Other handsets can only use PTT for one-to-one calls.
To call multiple devices using a cordless handset: 1. You have three ways to call multiple devices. When the handset is not in use:
ff Press and hold PUSH TO TALK until the handset shows Connecting to group….
ff Press PUSH TO TALK. Press qCID or pDIR to choose Group. Press MENU/SELECT or PUSH TO TALK, then your handset shows Connecting to group….
ff Press PUSH TO TALK. Press TONE followed by # (pound key). The handset shows Connecting to group….
When the connection is made, both the caller and the destination parties hear a beep. The speakerphones on all other devices automatically activate.
2. You need to press and hold PUSH TO TALK when you want to speak. Speak towards the handset. Your voice is broadcast to all eligible devices.
3. Release PUSH TO TALK after speaking. 4. Any device can reply (see Answer a PTT call on page 56). To call multiple devices using the telephone base: 1. You have three ways to call multiple handsets. When the telephone base is
not in use: ff Press and hold FLASH/PTT until the screen shows Connecting to group…. ff Press FLASH/PTT. Press qCID or pDIR to choose Group. Press
MENU/SELECT or FLASH/PTT, then the telephone base shows Connecting to group…. ff Press FLASH/PTT. Press TONE followed by # (pound key). The screen shows Connecting to group…. When the connection is made, both the caller and the destination parties hear a beep. The speakerphones on all other devices automatically activate. 2. You need to press and hold FLASH/PTT when you want to speak. Speak towards the telephone base. Your voice is broadcast to all devices. 3. Release FLASH/PTT after speaking. 4. Any handset can reply (see Answer a PTT call on page 56).
Note: After PUSH TO TALK on the handset or FLASH/PTT on the telephone base is released, the PTT call remains open for a short time. If no one presses PUSH TO TALK on the handset or FLASH/PTT on the telephone base within 10 seconds, the PTT call ends automatically.
55

Multiple handset use
Push-to-talk (PTT)
Answer a PTT call
You can respond to a PTT call, as described below.
1. When your device receives a PTT call, it beeps and shows Press and hold [PTT] to talk.
2. When the other party is speaking, your speakerphone light is on, and your device shows: ff PTT From HS X To HS X (the first X represents the initiating handset number, and the second X represents your handset number; a maximum of four handset numbers appear). -ORff PTT From HS X To Base (X represents the initiating handset number) or PTT From HS X To Base & HS X (the first X represents the initiating handset number, and the second X represents your handset number; a maximum of four handset numbers appear). -ORff PTT From Base To HS X (the X represents your handset number; a maximum of five handset numbers appear).
3. When your speakerphone light is off (the screen shows Press and hold [PTT] to talk), press and hold PUSH TO TALK on your handset or FLASH/PTT on your telephone base. You will hear a chirp. Speak towards the device. ff While you are speaking, your device shows PTT To Base, PTT To Handset: X (X represents the handset numbers of one or more destination handsets; a maximum of five handset numbers appear), or PTT To Base & Handset: X (X represents the handset numbers of one or more destination handsets; a maximum of four handset numbers appear). ff Your voice is broadcast to all destination devices. After speaking, release PUSH TO TALK on your handset or FLASH/PTT on your telephone base. Your device will beep. After the beep, if your speakerphone light is off, you can press and hold PUSH TO TALK on your handset or FLASH/PTT on your telephone base to continue speaking, or the destination device can respond.
Change a one-to-one PTT call to an intercom call
You can convert a one-to-one PTT session to an intercom call.
1. When your device shows Press and hold [PTT] to talk, press MENU/SELECT. The screen shows Intercom.
2. Press MENU/SELECT. Your device displays Calling base, Calling BASE 0 or Calling HANDSET X. The destination device briefly shows Push to talk Ended and then HANDSET is calling, HANDSET X is calling, Base is calling or BASE 0 is calling. The destination device rings.
56

Multiple handset use
Push-to-talk (PTT)
3. Press PHONE/FLASH or any dialing key (0-9, # or TONE ) on the destination handset, or press /SPEAKER or any dialing key (0-9, # or TONE ) on the telephone base or lift the corded handset to answer. Both devices show Intercom.
4. To end the intercom call, press OFF/CANCEL on your handset or place the handset in the charger, or press CANCEL on the telephone base. Both screens show Intercom ended.
Answer an incoming call during a PTT call
When you receive an outside call during PTT, there is an alert tone. ff During a one-to-one PTT call, press PHONE/FLASH on your handset or
/SPEAKER on the telephone base. The PTT call ends automatically and the outside call is answered. ff During a one-to-group PTT call, press PHONE/FLASH on the initiating handset or /SPEAKER on the initiating telephone base. The PTT call ends automatically and the outside call is answered. ff During a one-to-group PTT call, press PHONE/FLASH on any one of the destination handsets, or press /SPEAKER on the destination telephone base. That device answers the outside call. The PTT call continues for the rest of the PTT participants. ff To leave the PTT call without answering the incoming call, press
OFF/CANCEL on your handset or CANCEL on your telephone base. The telephone continues to ring.
Make an outgoing call during a PTT call
ff During a one-to-one PTT call, press PHONE/FLASH on your handset or /SPEAKER on your telephone base to get a dial tone. The PTT call ends
automatically. ff During a one-to-group PTT call, press PHONE/FLASH on the initiating
handset or /SPEAKER on the initiating telephone base. The PTT call ends automatically and you get a dial tone. ff During a one-to-group PTT call, press PHONE/FLASH on any one of the destination handsets or press /SPEAKER on the destination telephone base. That device gets a dial tone. The PTT call continues for the rest of the PTT participants.
End or leave a PTT call
The initiating device can end the PTT call. If any one of the destination devices leaves the PTT call, the call continues until all participants or the initiator hangs up. Press OFF/CANCEL on the handset or place the handset in the charger, or press CANCEL on the telephone base. The screen shows Push to talk Ended.
Note: After PUSH TO TALK on the handset or FLASH/PTT on the telephone base is released, the PTT call remains open for a short time. If no one presses PUSH TO TALK on the handset or FLASH/PTT on the telephone base within 10 seconds, the PTT call ends automatically.
57

Directory
About the directory
Shared directory
The directory is shared by all handsets and the telephone base. Changes made to the directory from any device apply to all.

Charlie Johnson 888-883-2445

Note:
ff Only one handset or the telephone base can review the directory at a time. If another device tries to enter the directory, the screen shows Not available at this time.
ff Directory entries can also be saved to the allow list or block list. See Allow list on page 85 and Block list on page 82.
ff When Smart call blocker is on, calls with numbers saved in the directory will get through and ring on your telephone. If a number saved in the directory is also saved in the block list, calls with this number will be blocked.

Capacity
The directory can store up to 50 entries, with a maximum of 15 alphanumeric characters (including spaces) for names and 30 digits for telephone numbers. A convenient search feature can help you find and dial numbers quickly (page 62).
If you try to save an entry when there are already 50 entries, the screen shows Directory full. You cannot store a new number until you delete one.

Directory
Create directory entries

Create a new directory entry

Using a cordless handset or the telephone base:
1. Press MENU/SELECT in idle mode to enter the main menu. 2. Press qCID or pDIR to scroll to Directory, then press
MENU/SELECT. 3. Press qCID or pDIR to scroll to Add contact, then press
MENU/SELECT.
4. Use the dialing keys to enter a telephone number (up to 30 digits) when prompted. ff Press qCID or pDIR to move the cursor to the left or right.
ff Press MUTE/DELETE on the handset or on the telephone base to erase a digit.

Smart call blk >Directory fffff
Review >Add contact
ENTER NUMBER 888-883-2445_

ff Press and hold MUTE/DELETE on the handset or the telephone base to erase all digits.

ff Press and hold REDIAL/PAUSE to enter a three-second dialing pause (a p appears).

-OR-

Copy a number from the redial list by pressing REDIAL/PAUSE, then qCID, pDIR or pressing REDIAL/PAUSE repeatedly to locate the number. Press
MENU/SELECT to copy the number.

5. Press MENU/SELECT to move on to the name.
ff The display shows Number already saved if the number is already in the directory. You cannot save the same number twice.

ENTER NAME Robert Brown_

6. Use the dialing keys to enter a name (up to 15 characters) when prompted. Each time you press a key, the character on that key appears. Additional key presses produce other characters on that key. See the chart on the following page.
ff Press qCID or pDIR to move the cursor to the left or right.

Saved to directory

ff Press 0 to add a space.

ff Press MUTE/DELETE on the handset or the telephone base to erase a character.

ff Press and hold MUTE/DELETE on the handset or the telephone base to erase all characters.

ff Press TONE to change the next letter to upper or lower case.

Directory
Create directory entries

Note: The first letter of every word is a capital letter. The remaining letters in a word start as lower case letters, as shown in the chart below.

Dialing

keys

space 0

Characters by number of key presses

9 10 11

–

(

)

7. Press MENU/SELECT to store your new directory entry. There is a confirmation tone and the screen shows Saved to directory. To change the entry later, see page 64.

Add a predialed telephone number to the directory You can save a predialed telephone number to the directory. 1. Enter the telephone number when in idle mode. 2. Follow the steps in Edit a directory entry on page 64.

Directory
Review the directory
Review directory entries Using a cordless handset or the telephone base: 1. Press pDIR when in idle mode. The summary screen shows briefly and
then the first entry in the directory shows. -ORPress MENU/SELECT when in idle mode, then press qCID or pDIR to scroll to Directory. Press MENU/SELECT twice. 2. Press qCID or pDIR to browse through the directory. Entries appear alphabetically by the first letter in the name.
Notes: ff If the telephone number in the directory exceeds 15 digits, < appears in front of the telephone number. Press TONE
to move towards the end of the telephone number or press # (pound key) to move towards the beginning of the telephone number. ff Directory empty appears if there are no directory entries.
61

Directory
Search the directory
Search by name Using a cordless handset or the telephone base: 1. Press pDIR in idle mode to show the first listing in the directory. 2. When an entry appears, press the dialing keys (0-9) to start a name
search. The directory shows the first name beginning with the first letter associated with the dialing key, if there is an entry in the directory beginning with that letter. Press qCID or pDIR to scroll through the directory. 3. To see other names starting with the letters on the same dialing key, keep pressing the key. The names appear in alphabetical order. For example, if you have the names Jennifer, Jessie, Kevin and Linda in your directory: ff If you press 5 (JKL) once, you see Jennifer. Press qCID and you
see Jessie. ff If you press 5 (JKL) twice, you see Kevin. ff If you press 5 (JKL) three times, you see Linda. ff If you press 5 (JKL) four times, you see 5 and then the directory entry
beginning with 5 or the next closest entry after 5. ff If you press 5 (JKL) five times, you see Jennifer again.
Notes: ff If there is no name matching the first letter of the key you press, the directory shows a name matching the following
letters of the key. ff If you press a key (0-9) and no name starts with any of the letters on that key, the directory shows the entry matching
the next letter in the directory.
62

Directory
Dial, delete or edit directory entries
To dial, delete or edit a directory entry (name and number), the entry must be displayed on the screen. Use Review the directory (page 61) or Search by name (page 62) to show an entry.

Display dial To dial a displayed number from the directory: Press PHONE/FLASH or /SPEAKER on the handset. -OROn the telephone base, lift the corded handset or press

/SPEAKER.

Delete a directory entry
Using a cordless handset or the telephone base:
To delete the displayed directory entry, press MUTE/DELETE. The screen displays Delete contact?. Press MENU/SELECT to confirm. There is a confirmation tone and the screen displays Contact deleted. You cannot retrieve a deleted entry.

Robert Brown Delete contact?

Directory
Dial, delete or edit directory entries

Edit a directory entry

Using a cordless handset or the telephone base:

1. When a directory entry displays, press MENU/SELECT. The screen shows EDIT NUMBER along with the phone number to be edited. If you only want to edit the name, skip to Step 3.

Linda Miller 888-722-7702

2. To edit the number:
ff Press the dialing keys to add digits. ff Press qCID or pDIR to move the cursor to the left
or right.

EDIT NUMBER 888-883-2445_

ff Press MUTE/DELETE on the handset or the telephone base to erase a digit.
ff Press and hold MUTE/DELETE on the handset or the telephone base to erase all digits.

EDIT NAME Robert Brown_

ff Press and hold REDIAL/PAUSE to add a three-second dialing pause (a p appears).
3. Press MENU/SELECT to move on to the name. The screen shows EDIT NAME along with the name to be edited.

Robert Brown 888-883-2445

4. To edit the name:

ff Press the dialing keys to add characters (page 60). ff Press qCID or pDIR to move the cursor to the left or right.

ff Press MUTE/DELETE on the handset or the telephone base to erase a character.

ff Press and hold MUTE/DELETE on your handset or your telephone base to

erase all characters. 5. Press MENU/SELECT to save the entry. There is a confirmation tone and the
screen shows Saved to directory.

Directory
Speed dial
The telephone system has 10 speed dial locations (2-9 and 0, location 1 is reserved for voicemail) where you can store the telephone numbers you wish to dial more quickly. You can store up to 30 digits in each location. Speed dial assignments can only be selected from the existing directory entries, with the exception of
1, which must be manually entered. In the directory, speed dial locations except for 1 are indicated by their number on the bottom left hand corner of the entry on the handset screen and bottom right hand corner on the telephone base screen.

Robert Brown 888-883-2445
2
Speed dial location Robert Brown p 888-883-2445 q
2
Speed dial location

Assign a speed dial number

Using a cordless handset or the telephone base:

1. When the telephone is idle, press MENU/SELECT.
2. Press qCID or pDIR to scroll to Directory. Press MENU/SELECT.
3. Press qCID or pDIR to scroll to Speed dial. Press MENU/SELECT.
4. Press qCID or pDIR to choose your desired speed dial location (2-9, 0), then press MENU/SELECT. The screen briefly shows Copy from Directory… and then displays the directory list.

Smart call blk >Directory
Add contact >Speed dial

5. Press qCID or pDIR to scroll to the phone number you wish to assign to the selected speed dial location.
6. Press MENU/SELECT to save the setting. There is a confirmation tone and the screen returns to the speed dial list.

>2:Robert Brown 3:<Unassigned>

-OR-

1. When the telephone is idle, press and hold the desired speed dial location (2-9, 0), then press MENU/SELECT. The screen briefly shows Copy from Directory… and then displays the directory list.

2. Press qCID or pDIR to scroll to the phone number you wish to assign to the selected speed dial location.

3. Press MENU/SELECT to save the setting. There is a confirmation tone and the screen returns to the speed dial list.

Directory
Speed dial

Reassign a speed dial number

Using a cordless handset or the telephone base:
1. When the telephone is idle, press MENU/SELECT. 2. Press qCID or pDIR to scroll to Directory. Press MENU/SELECT. 3. Press qCID or pDIR to scroll to Speed dial. Press
MENU/SELECT. 4. Press qCID or pDIR to choose the location you wish
to reassign, then press MENU/SELECT to show the directory entry.

Robert Brown 888-883-2445
2
Copy from Directory…

5. Press MENU/SELECT again.

6. Press MENU/SELECT to select Change SD. The screen briefly shows Copy from Directory… and then displays the directory list.

Linda Miller 888-722-7702

7. Press qCID or pDIR to scroll to the phone number you

wish to reassign to the selected speed dial location.

8. Press MENU/SELECT to save the setting and return to the speed dial list. There is a confirmation tone.

Assign your speed dial voicemail number
See the Set speed dial voicemail number sections on page 23 and page 34 for instructions on assigning your speed dial voicemail number.

Directory
Speed dial

Delete a speed dial number

Using a cordless handset or the telephone base:
1. When the telephone is idle, press MENU/SELECT. 2. Press qCID or pDIR to scroll to Directory. Press
MENU/SELECT. 3. Press qCID or pDIR to scroll to Speed dial. Press
MENU/SELECT. 4. Press qCID or pDIR to scroll to the location you wish
to delete the speed dial number from, then:

Linda Miller 888-722-7702
2
Speed dial empty

ff Press MUTE/DELETE on the handset or the telephone
base to delete the displayed speed dial number. There is a confirmation tone and the screen shows Speed dial
empty before returning to the speed dial list.

>2:<Unassigned> 3:<Unassigned>

-OR-

i. Press MENU/SELECT to show the directory entry.

ii. Press MENU/SELECT again.

iii. Scroll to Clear SD and then press MENU/SELECT to delete the displayed speed dial number. There is a confirmation tone and the screen shows Speed dial empty before returning to the speed dial list.

Make a call using speed dial
Using a cordless handset or the telephone base:
When in idle mode, press and hold the dialing key (2-9, 0) corresponding to the assigned location you wish to call.
-OR-
1. Press MENU/SELECT when in idle mode. 2. Press qCID or pDIR to scroll to Directory, then press MENU/SELECT. 3. Press qCID or pDIR to scroll to Speed dial, then press MENU/SELECT. 4. Press qCID or pDIR to scroll to the desired location and then press
PHONE/FLASH or /SPEAKER on the cordless handset, or press /SPEAKER or lift the corded handset on the telephone base.

Check your voicemail using speed dial Using a cordless handset or the telephone base: When in idle mode, press and hold the 1 key on a cordless handset or the telephone base to dial your voicemail number. If you are using the telephone base, the speakerphone is used to dial out. You may switch to corded handset mode by picking up the corded handset.
67

Caller ID
About caller ID
This product supports caller ID services offered by most telephone service providers. Caller ID allows you to see the name, number, date and time of calls. The available caller ID information will appear after the first or second ring.

Information about caller ID with call waiting
Caller ID with call waiting lets you see the name and telephone number of the caller before answering the call, even while on another call.

It may be necessary to change your telephone service to use this feature. Contact your telephone service provider if:

CHRISTINE SMITH 888-883-2445

ff You have both caller ID and call waiting, but as separate services (you may need to combine these services).
ff You have only caller ID service, or only call waiting service.
ff You don’t subscribe to caller ID or call waiting services.
There are fees for caller ID services. In addition, services may not be available in all areas.

NEW
10:01AM 10/15

This product can provide information only if both you and the caller are in areas offering caller ID service and if both telephone service providers use compatible equipment.
The time and date, along with the call information, are from
the telephone service provider.

Caller ID information may not be available for every incoming call. Callers may intentionally block their names and/or telephone numbers. You can only view a maximum of 15 digits of every caller ID log entry. To view caller ID log entries with numbers between 16 and 24 digits, you must save the entry to the directory (see page 73).

CHRISTINE SMITH 888-883-2445

10:01 AM

10/15NEW

Note: You can use this product with regular caller ID service, or you can use this product’s other features without subscribing to caller ID or combined caller ID with call waiting service.

Caller ID
Caller ID log
How the caller ID log works
The telephone stores caller ID information about the last 50 incoming calls in the telephone base. Entries are stored in reverse chronological order. The phone deletes the oldest entry when the log is full to make room for new calls. This information is common to the telephone base and all handsets, so changes made using any handset or the telephone base are reflected in all other devices. If you answer a call before the information appears on the screen, it does not show in the caller ID log.

Note: Each entry may have up to 24 digits for the phone number and 15 characters for the name.

Missed (new) call indicator

When a handset or the telephone base is in idle mode and has new or missed calls, its screen shows XX Missed calls.

All new and missed entries are counted as missed calls. Each time you review a new caller ID log entry (indicated by NEW on the screen), the missed calls message goes away. When there is a new unanswered call, the missed calls message displays again. The number of missed calls includes all new and missed entries that have not been reviewed.

HANDSET 1 6 Missed calls
10:01AM 10/15
Robert Brown 888-883-2445

If you do not want to review the missed calls one by one, but still want to keep them in the caller ID log, you can press and hold OFF/CANCEL on the handset for four seconds when the handset is idle, or press and hold CANCEL on the telephone base for four seconds when the telephone base is idle. You will hear a confirmation tone. All the entries in the caller ID log become old (reviewed already), and the missed calls message goes away.

NEW
09:30 AM 10/15

BASE
6 Missed calls
MSG #
1 10:01PM 10/15

Robert Brown p

888-883-2445 q

MSG #
1 10:01PM

10/15 NEW

Caller ID
Caller ID operation
Memory match
If the incoming telephone number matches the last 7 digits of a telephone number in your directory, the name that appears on the screen matches the corresponding name in your directory.
For example, if Christine Smith calls, her name appears as Chris if this is how you entered it into your directory.
Note: The number shown in the caller ID log will be in the format sent by the telephone service provider. The telephone service provider usually delivers ten-digit phone numbers (area code plus telephone number). If the telephone number of the caller does not match a number in your directory, the name will appear as it is delivered by the telephone service provider.

Chris 888-883-2445
NEW
10:01AM 10/15

CHRIS 888-883-2445

10:01 AM

10/15 NEW

Caller ID
Caller ID operation

Review the caller ID log

Review the caller ID log to find out who called, to return the call, or to copy the caller’s name and number into your directory. Caller ID log empty appears if there are no records in the caller ID log.
Using a cordless handset or the telephone base:

HANDSET 1 6 Missed calls
10:01AM 10/15

1. When the handset or the telephone base is in idle mode, press qCID to review the caller ID log in reverse
chronological order starting with the most recent call.

-OR-
Review the caller ID log by pressing MENU/SELECT. Press qCID or pDIR to scroll to Caller ID log, then press MENU/SELECT twice to select Review. 2. Press qCID or pDIR to scroll through the list.
3. Press OFF/CANCEL on the handset or CANCEL on the telephone base to exit the caller ID log.
You hear a double beep when the list reaches the beginning or end of the caller ID log.

Directory >Caller ID log
BASE 6 Missed calls
MSG #
1 10:01PM 10/15

Note: Only one handset or the telephone base can review the caller ID log at a time. If another device tries to enter the directory or caller ID log, it shows Not available at this time.

Documents / Resources

AT T CL84107 DECT 6.0 Expandable Corded Cordless Phone with Smart Call Blocker [pdf] User Guide
CL84107 DECT 6.0 Expandable Corded Cordless Phone with Smart Call Blocker, CL84107, DECT 6.0 Expandable Corded Cordless Phone with Smart Call Blocker, Cordless Phone with Smart Call Blocker, Smart Call Blocker, Call Blocker

References

User Manual

CL84107 DECT 6.0 Expandable Corded Cordless Phone with Smart Call Blocker

Product Information

Specifications:

Important Safety Information:

Energy Consumption:

Compatibility:

Parts Checklist:

TIA-1083 Compliant Logo:

Warranty Information:

Product Usage Instructions

Getting Started:

Using the Corded Handset:

Using the Cordless Handset:

Answering System:

FAQ (Frequently Asked Questions)

Q: Where can I find the model and serial numbers of my AT&T
telephone?

Q: How can I obtain warranty service for my AT&T
telephone?

Q: Can I use my AT&T telephone with T-coil equipped hearing
aids and cochlear implants?

Documents / Resources

References

Leave a comment

Cancel reply