CP Series Dedicated Horizontal Plenum Coils with Plenum
“
Specifications
- Model: CP Series
- Coil Type: Dedicated Horizontal Copper Coil with Plenum
- Standard Features: Detection System (RDS), Refrigerant
Ready
Product Usage Instructions
Performance & Dimensional Data
Refer to the table below for the nominal coil capacity and
dimensions:
| Model | Suction Line (OD) | Liquid Line (OD) | BTU | Cabinet Width (in.) | Cabinet Depth (in.) | Max. Height (in.) |
|---|
Cabinet Dimensional Data
Refer to Figure 2 for cabinet and plenum board dimensions:
FAQ
Q: Where can I find the full warranty terms?
A: For full warranty terms and conditions, please refer to the
Warranty Information section on Aspen’s official website.
Q: How do I identify the correct match for the coil?
A: Use the AHRI Quick Match Tool available on the Resources page
of Aspen’s website to identify the correct AHRI-certified match for
any Aspen coil, air handler, or Aspen PRO air handler.
Q: Can I make changes to the product without notice?
A: In keeping with its commitment to continuous improvement,
Aspen Manufacturing reserves the right to make changes without
notice and incurring obligation.
Q: How can I stay up-to-date with product information?
A: To stay up-to-date with this product and Aspen’s trusted line
of coils, air handlers, and more, visit their website at
www.aspenmfg.com.
“`
DEDICATED HORIZONTAL PLENUM COILS CP SERIES
CP SERIES COILS
DEDICATED HORIZONTAL COPPER COIL WITH PLENUM
Representative image only. Some models may vary in appearance.
STANDARD FEATURES
· Rifled copper tubing, enhanced aluminum fins.
· Fully insulated cabinet with plenum sides and back constructed of foilbacked, faced, one-inch thick, fiberglass duct-board.
· Immersion tested at 500 psi, followed by nitrogen pressurization and factory sealing to ensure optimal system integrity and long-term reliability.
· Refrigerant lines exit from top of the coil with Schrader valve for pressure assurance testing. Refrigerant and plumbing connections: Liquid line: 3/8″ ODS Suction line: 3/4″ ODS on 1-1/2-ton to 3-ton 7/8″ ODS on 3-1/2-ton to 5-ton Drain connections: Condensate Drains: 3/4″ NPT Secondary metal drain pan included with 1″ spacing around the cabinet for turnkey installation.
· Heavy duty polypropylene drain pans.
· Three-piece service door on top for easy service access.
· Fully insulated cabinets with faced insulation.
· Secondary metal drain pan included with one inch spacing around the cabinet for turnkey installation.
· AHRI certifiable with all brands of A/C and heat pump systems.
· A2L refrigerants require a Refrigerant Detection System (RDS) for compliance. · ETL listed for R22 and 410A. ETL listed for R454B and R32 with Refrigerant
Detection System (RDS).
WARRANTY · Ten-year limited warranty with registration.
HELPFUL LINKS
VIEW PRODUCT ONLINE
For full warranty terms and conditions, please refer to the Warranty Information section on Aspen’s official website.
CP-SS-C-008
AHRI QUICK MATCH TOOL
Identify the correct AHRI-certified match for any Aspen coil, air handler, or Aspen PRO air handler. Available on the Resources page.
R-410A · R-22 · R-454B · R-32
REFRIGERANT READY
WHEN PROPER METERING DEVICE IS USED
In keeping with its commitment to continuous improvement. Aspen Manufacturing reserves the right to make changes without notice and incurring obligation.
To stay up-to-date with this product and Aspen’s trusted line of coils, air handlers, and more, go to our website.
© 2025 Aspen Manufacturing. All Rights Reserved
Customer Service: info@aspenmfg.com · Warranty Team: warranty@aspenmfg.com · Phone: 281.441.6500 · Toll Free: 800.423.9007 · Fax: 281.441.6510
WWW.ASPENMFG.COM
DEDICATED HORIZONTAL PLENUM COILS CP SERIES
PERFORMANCE & DIMENSIONAL DATA (In.) – FIGURE 1
CONNECTIONS
NOM. COIL CAPACITY
MODEL
SUC. LINE
LIQ. LINE
BTU
OD
OD
CP25A*
CP25B* 25,000 3/4
3/8
CP25E*
CP31A*
31,000 3/4
3/8
CP31E*
CP37A*
CP37B*
CP37C*
CP37D* 37,000 3/4
3/8
CP37E* CP37F*
CP37G*
CP43C*
CP43D* 43,000 7/8
3/8
CP43G*
CP49A*
CP49B*
CP49C*
CP49D* 49,000
7/8
3/8
CP49G*
CP49H*
CP61A*
CP61B*
CP61C*
CP61D*
61,000 7/8
3/8
CP61E*
CP61F*
CP61G*
CP61H*
CABINET
WIDTH
DEPTH
MAX. HEIGHT
W”
D”
H”
28
14-1/2
28
15
28
17-1/2
28
15
28
17-1/2
28
15
28
17-1/2
28
17-1/2
33
21
28
21
28
17-1/2
40
21
28
21
33
21
21
40
21
28
17-1/2
28
21
28
21
33
21
40
17-1/2
40
21
28
21
33
21
33
24-1/2
33
25
33
25
33
24-1/2
40
21
40
24-1/2
DIMENSIONS TRANSITION
HEIGHT AVAILABLE
OPTIONS
T” 14 14/14-1/2 14/14-1/2 14/14-1/2 14/14-1/2 14/14-1/2 14/14-1/2 14/14-1/2 14/14-1/2/17-1/2 14/14-1/2/17-1/2 14/14-1/2 14/14-1/2/17-1/2 14/14-1/2/17-1/2 14/14-1/2/17-1/2 14/14-1/2/17-1/2 14/14-1/2 14/14-1/2/17-1/2 14/14-1/2/17-1/2 14/14-1/2/17-1/2 14/14-1/2 14/14-1/2/17-1/2 14/14-1/2/17-1/2 14/14-1/2/17-1/2 21/24 21/24/24-1/2 21/24/24-1/2 21/24 14/14-1/2/17-1/2 21/24
RETURN OPENING
HXW 13-1/2X20
14X20 16-1/2X20
14X20 16-1/2X20
14X20 16-1/2X20 16-1/2X20
20X20 20X20 16-1/2X20 20X20 16-1/2X20 16-1/2X20 20X20 16-1/2X20 20X20 20X20 20X20 16-1/2X20 20X20 20X20 20X20 23-1/2X20 24X20 24X20 23-1/2X20 20X20 23-1/2X20
SHIPPING INFO.
AUX PAN
WEIGHT (LBS)
DEPTH WIDTH
# OF ROWS
SKID QTY
E”
F”
3
4
30
23
37
41
16
30
23
39
44
16
30
23
52
59
16
30
23
39
44
16
30
23
52
59
16
30
23
39
44
16
30
23
49
55
16
30
23
43
49
16
35
23
68
77
6
30
23
58
67
12
30
23
52
59
16
42
23
98 105
6
30
23
60
69
12
35
23
67
76
6
42
23
99 108
6
30
23
51
58
16
30
23
58
66
12
30
23
58
67
12
35
23
68
77
6
42
23
85
92
8
42
23
98 107
6
30
23
60
69
6
35
23
68
77
6
35
23
79
92
6
35
23
81
93
6
35
23
83
97
6
35
23
69
78
6
42
23
101 107
6
42
23
102 111
4
FIGURE 1
In keeping with its commitment to continuous improvement. Aspen Manufacturing reserves the right to make changes without notice and incurring obligation. To stay up-to-date with this product and Aspen’s trusted line of coils, air handlers, and more, go to our website. © 2025 Aspen Manufacturing. All Rights Reserved
Customer Service: info@aspenmfg.com Warranty Team: warranty@aspenmfg.com Phone: 281.441.6500 Toll Free: 800.423.9007 Fax: 281.441.6510
WWW.ASPENMFG.COM
DEDICATED HORIZONTAL PLENUM COILS CP SERIES
CABINET DIMENSIONAL DATA – FIGURE 2
CABINET DIMENSIONS
PLENUM BOARD DIMENSIONS
WIDTH W”
21
DEPTH HEIGHT
D”
H”
28
14 1/2
28
17 1/2
28
21
28
15
33
17 1/2
33
21
33
24 1/2
33
25
40
17 1/2
40
21
40
24 1/2
SIDE VIEW
A
B
[H – 1.75″-3″] [D – 1.75″-4.5″]9-3/4
21-3/4
12-3/4 16-1/4
21-3/4 21-3/4
10-1/4 12-3/4 16-1/4
21-3/4 26-3/4 26-3/4
19-3/4
26-3/4
20-1/4 12-3/4
26-3/4 33-3/4
16-1/4 19-3/4
33-3/4 33-3/4
FRONT VIEW
J
K
[H – 0.75″-3″] [W – 1″-1″]10-3/4
13-3/4 17-1/4
11-1/4
13-3/4
17-1/4
19
20-3/4
21-1/4 13-3/4
17-1/4 20-3/4
FIGURE 2
DUCTING SIZE
8″ DUCT FITS?
12″ DUCT FITS?
14″ DUCT FITS?
YES
NO YES YES YES YES YES YES YES YES YES YES
NO NO YES YES NO
YES YES YES NO YES YES
1.75″
D 1.75″
A
H
B
4.5″
3″
W
0.75″
K
1″
1″
J H
3″ W
SIDE VIEW
FRONT VIEW
DRAIN PAN TEMPERATURE TABLE
DRAIN PAN TYPE Plastic – Standard
TEMP LIMITS 290°
In keeping with its commitment to continuous improvement. Aspen Manufacturing reserves the right to make changes without notice and incurring obligation. To stay up-to-date with this product and Aspen’s trusted line of coils, air handlers, and more, go to our website. © 2025 Aspen Manufacturing. All Rights Reserved
Customer Service: info@aspenmfg.com Warranty Team: warranty@aspenmfg.com Phone: 281.441.6500 Toll Free: 800.423.9007 Fax: 281.441.6510
WWW.ASPENMFG.COM
Documents / Resources
 |
ASPEN CP Series Dedicated Horizontal Plenum Coils with Plenum [pdf] Owner's Manual CP25A, CP25B, CP25E, CP31A, CP31E, CP37A, CP37B, CP37C, CP37D, CP37E, CP37F, CP37G, CP43C, CP43D, CP43G, CP49A, CP49B, CP49C, CP49D, CP49G, CP49H, CP61A, CP61B, CP61C, CP61D, CP61E, CP61F, CP61G, CP61H, CP Series Dedicated Horizontal Plenum Coils with Plenum, CP Series, Dedicated Horizontal Plenum Coils with Plenum, Horizontal Plenum Coils with Plenum, Plenum Coils with Plenum, Coils with Plenum, Plenum, Coils |