APANTAC SDM-HDBT-R-UHD Smart Display Module Platform
Overview
The SDM-HDBT-R-UHD can be installed in any display that is equipped with Intel SDM-S or SDM-L slot. The SDM-HDBT-R-UHD uses HDBaseT™, it is compatible with Apantac HDBT-1-E-UHD transmitters and can extend 1080P HDMI signal up to 100/150 meters and 4K/UHD HDMI signals up to 70 meters.
Package Contents
- 1 x SDM-HDBT-R-UHD
- 1 x User manual
- 1 x SDM-S mounting bracket
- 1 x SDM-L mounting bracket
- 1 x IR receiver
- 1 x IR blaster
Features
- Supports 4K@60Hz (4:4:4) up to 100 meters with CAT6a/CAT7 cables
- Supports 4K@60Hz (4:2:0) and 1080P (12bit) and 3D up to 100 meters
- Supports HDMI 2.0, HDCP 1.4 and 2.2
- Supports 3D pass-through
- Supports CEC pass-through
- Supports RS-232 (Bi-directional)
- Supports all frequency of IR control
- Supports HDBaseT Mode with Apantac HDBaseT Transmitter
- Supports all digital audio meter modes
- Supports Long Reach Mode (1080P@60Hz / 8bit, up to 150 meters) with Apantac HDBaseT Transmitter
- Maximum Power Consumption – 9W max
Specifications
| Function | SDM-HDBT-R-UHD |
| SDM Edge Connector | Intel SDM PCIex8(98pin) x1 |
| HDBaseT Link In | RJ45x1 |
| IR In/Out | 3.5ψ Stereo Jack x 1 |
| Status LEDs | 4 in 1 LED |
|
Max Resolution |
4K@60Hz (4:4:4/4:2:0)
4K@30Hz 1080P@60Hz |
| Cable distance | 100m for 4K@60Hz(4:4:4) with CAT6a/CAT7 cables,
100/150m for 1080P@60Hz |
| Mounting Brackets | SDM-S SDM-L |
| Environment | Operating temperature – -20C ~ 60C
Humidity: 10% ~ 90% / non-condensing |
| Weight | 300g without packaging |
|
Dimensions (LxWxH) |
Board: 60x110x20 SDM-S: 80x124x25
SDM-L: 195x124x25 mm |
Front View
- Status LED – Power, HDCP, LINK, MODE
- Power – Green = On
- HDCP – Flashing = HDMI in, Off = no HDMI
- LINK – Green = HDBaseT in
- MODE – Flashing = Receiver working properly
- LINKED In – RJ45
- IR In (for IR receiver cable)
- IR Out (for IR blaster cable)
SDM-S Mounting Bracket
SDM-L Mounting Bracket
Assembly
SDM-S
SDM-L
IR Blaster Cables
© 2022 APANTAC LLC. All rights reserved 10200 SW Allen Blvd, Suite C Beaverton, OR 97005, USA
- PHONE +1 503 968 3000
- FAX +1 503 389 7921
The content of this document is provided in connection with Apantac LLC (“Apantac”) products. Apantac makes no representation or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specification and product descriptions at any time without notice.
Documents / Resources
 |
APANTAC SDM-HDBT-R-UHD Smart Display Module Platform [pdf] Installation Guide SDM-HDBT-R-UHD Smart Display Module Platform, SDM-HDBT-R-UHD, Smart Display Module Platform, Display Module Platform, Module Platform, Platform |
