Akko 5098B Multi-modes User Manual
Thank you for purchasing and using this product. Please read this manual carefully before use to ensure a better user experience. Keep it for future reference.
Product Introduction
The Akko 5098B is a multi-mode keyboard.
Packing List:
[Image of keyboard and accessories]
System Requirements:
Windows® XP / Vista / 7 / 8 / 10 or higher versions.
Installation Steps:
Connect the keyboard's USB cable to a USB port on your computer to start using it.
LED Indicator Overview
| Status | Indicator | Re-Connecting | Pairing | Connected |
|---|---|---|---|---|
| Bluetooth device 1 | LED for key E | Blue light blinks slowly | Blue light blinks fast | On for 2s and then off |
| Bluetooth device 2 | LED for key R | Blue light blinks slowly | Blue light blinks fast | On for 2s and then off |
| Bluetooth device 3 | LED for key T | Blue light blinks slowly | Blue light blinks fast | On for 2s and then off |
| 2.4G wireless device | LED for key Y | Green light blinks slowly | Green light blinks fast | On for 2s and then off |
| Wired mode | LED for key U | N/A | N/A | Red light On for 2s and then off |
Indicator Status
| Status | Indicator | Indicating Mode |
|---|---|---|
| Low Battery | The third indicator light | Red Light Blinks Slowly |
| Charging | The third indicator light | Steady Red |
| Fully Charged | The third indicator light | LED OFF |
| Caps Lock | The first indicator light | Steady White |
| Num Lock | The second indicator light | Blue light is always on |
| Win Lock | Win key indicator | Steady White |
5098B Hotkeys
[Image of keyboard highlighting hotkeys]
Function Key Combinations:
- Fn + W: Swap WASD keys with ↑↓←→ keys.
- Fn + F1: My Computer
- Fn + F2: E-mail
- Fn + F3: Windows Search
- Fn + F4: Browser Homepage
- Fn + F5: Multimedia Player
- Fn + F6: Play/Pause
- Fn + F7: Previous Song
- Fn + F8: Next Song
5098B System Commands (Windows)
[Image of keyboard highlighting system commands]
- Fn + ~: Press and hold for 3 seconds to restore to factory settings.
- Fn + L_Win: Lock Windows Key.
5098B LCD Screen Features
Encoder Wheel
- Scroll Up: Volume +
- Scroll Down: Volume -
- Press: Play/Pause
- Fn + Press: Switch to screen control mode
- Scroll Up/Down: Switch between screen functions
- Press: Confirm selection and return to the previous level
Volume Control
Volume up, Volume down.
Lighting Effects
Effect1, Effect2, Effect3, Effect4, Effect5, Effect6, Effect7, Effect8, Effect9, Effect10, Effect11, Effect12, Effect13, Effect14, Effect15, Effect16, Effect17, Effect18, Effect19, Effect20.
Light Color
Rainbow, Red, Green, Blue, Orange, Purple, Yellow, Custom (White).
Light brightness
0 - 25% - 50% - 75% - 100%
Light Speed
0 - 25% - 50% - 75% - 100%
Side light effect
Neon, Wave, Marquee, Steady, Breathing, Off.
Language Selection
Chinese (中文), English (EN).
Connection
Bluetooth device 1, Bluetooth device 2, Bluetooth device 3, 2.4G wireless device, Wired mode, Return.
5098B Power Switch
[Image of keyboard power switch]
5098B System Commands (Mac)
[Image of keyboard highlighting Mac system commands]
- F1: Decrease display brightness
- F2: Increase display brightness
- F3: Open mission control
- Fn + F4: Activate Siri
- F7: Skip back (Audio)
- F8: Pause/Play (Audio)
- F9: Skip forward (Audio)
- F10: Mute
- Fn + F11: Volume down
- F12: Volume up
- L_Win: L_Option
- L_Alt: L_Command
- R_Alt: R_Command
5098B Backlight Settings
[Image of keyboard highlighting backlight settings]
- Fn + Del: Cycle through backlight effects (Effect1-Effect20).
- Fn + ↑: Brightness Up
- Fn + ↓: Brightness Down
- Fn + ←: Set animation direction to left
- Fn + →: Set animation direction to right
- Fn + =: Slower Animation
- Fn + -: Faster Animation
- Fn + Z: This shortcut allows setting backlight to 7 single colors with RGB loop effect.
- Fn + X: Adjust side LED brightness (5 levels).
- Fn + L: Adjust side LED animation speed (5 levels).
- Fn + Left Ctrl: Light Off/On.
- Fn + Left Alt: Adjust side LED mode, including Lights OFF (6 levels).
- Fn + Left Alt (again): Side LED mode: This shortcut allows setting the light to 7 single colors with an RGB loop effect.
5098B Wireless/Wired Connection Guide
[Image of keyboard showing connection modes]
- Fn + E: Bluetooth Device 1
- Fn + R: Bluetooth Device 2
- Fn + T: Bluetooth Device 3
- Fn + Y: 2.4G Wireless Device
- Fn + U: Wired Mode
Connection Instructions:
- Short press to reconnect.
- Long press to pair.
Bluetooth Pairing
After the keyboard is turned on, press Fn+E/R/T to enter Bluetooth mode. Press and hold the Fn+E/R/T key combination for 3 seconds. The keyboard will enter the pairing state. The blue indicator light will flash quickly, and the indicator light will stay on for 2 seconds after connecting. If the device is not connected, the indicator light will go out, and the keyboard will enter sleep mode.
2.4G Pairing
After turning on the keyboard, press FN+Y to enter 2.4G mode. Then press and hold the FN+Y key combination for 3 seconds to enter pairing mode. Insert the receiver, and the indicator light will flash quickly. Once the pairing is successful, the LED indicator will stay on for 2 seconds. If no available device is found within 30 seconds, the LED indicator will turn off, and the keyboard will enter sleep mode.
Battery Level Check
In wireless mode, press Fn+Space key combination to check battery power. The space key's backlight indicates the battery level:
- Below 30%: Red Light
- 30-50%: Orange Light
- 50-70%: Purple Light
- 70-90%: Yellow Light
- 90-100%: Green Light
[Visual representation of battery levels with corresponding colors]
Key/Lighting Effects Customization Instruction
- Keys can be remapped and RGB can be programmed via the driver in any connection mode.
- Keyboard lighting can be coordinated with the driver for audio visualizer effects.
- Download the Akko Cloud driver from the Akko website.
- Users can download the driver via en.akkogear.com.
Akko Warranty and Service Statement
- Akko provides a one-year warranty for customers in mainland China. For other regions, please contact your seller (Akko distributor) for specific warranty policy.
- If the warranty expires, customers need to pay for repairs. Akko will provide instructions for self-repair, but users assume full responsibility for any loss during self-repair.
- Defects from disassembly, improper usage, or incorrect installation are not covered by warranty.
- Return and warranty policies may vary by platform and are subject to the specific distributor at the time of purchase.
Company: Shenzhen Yinchen Technology Co., Ltd
Address: 33 Langbi Rd, Bitou First Industrial Zone, Bao'an District, Shenzhen, China
Tel: 0755-23216420
Website: www.akkogear.com
Origin: Shenzhen, China
[Warning symbol] WARNING: Water and Beverages can't be poured into the Keyboard.
[CE, FC logos] Made in China
Precautions: Man-made damage is not limited to immersion, falling off, and pulling off wires with excessive forces, etc. The keyboard is an electronic product; please handle it with care according to electronic product protection methods.
