J.Burrows Elite MS400 Verticle Wireless Mouse

Introduction

This manual provides instructions for the J.Burrows Elite MS400 Verticle Wireless Mouse.

Manufactured by Officeworks Ltd, 236-262 East Boundary Road, East Bentleigh VIC 3165, Australia. Made in China.

Compatible with: Windows® 10 or later, Mac OS X 10.10 or later.

Contents

• 1. Mouse
• 2. USB-A receiver
• 3. Charging cable
• 4. Instruction manual
• 5. Quick start guide

Functions

Mouse Components:

• 1. Left button
• 2. Right button
• 3. Scroll wheel
• 4. DPI button
• 5. DPI/Low power indicator light
• 6. Mode button

Additional Components:

• 7. Forward / Backward buttons
• 8. Mode indicator light
• 9. On / Off switch
• 10. Optical sensor
• 11. Charging cable
• 12. USB-A receiver

Installation Guide

[Audio icon] Retrieve USB receiver from magnetic position.

Follow the diagram to locate and remove the USB receiver.

Operation

Power and DPI

[Power symbol] Turn on the power switch.

Press the DPI button to modify the mouse sensitivity. The red LED indicator light will flash to indicate DPI level: once for 1000 DPI, twice for 1600 DPI, and three times for 2400 DPI.

2.4GHz Connection:

Plug the USB receiver into the computer USB port.

Drivers will install automatically. Once completed, the mouse is ready to use. Ensure the left white selection light on the top of the mouse is flashing.

Bluetooth Pairing

Connect the first Bluetooth device:

Press the mode button and select BT1 (indicated by a white light in the middle on the top of the mouse). The white light will flash once. Then, hold the round button for more than three seconds until the white light flashes quickly. The mouse is now in Bluetooth pairing mode.

Connect the second Bluetooth device:

Press the mode button and select BT2 (indicated by a white light in the right on the top of the mouse). The white light will flash once. Then, hold the mode button for more than three seconds until the white light flashes quickly. The mouse is now in Bluetooth pairing mode.

General Bluetooth Pairing:

Press the round button and select BT1 or BT2. The white indicator light will be on. Hold the mode button for 3 seconds until the white indicator light flashes. Find and pair the Elite MS400 on your computer's Bluetooth device list.

Indicator Light and Charging

Indicator Light:

• Red LED light flashes when power is low.
• Blue LED light is on when charging.
• LED light is off when fully charged.

Full charging time is approximately 4 hours.

Note: Fully charge your Elite MS400 before first use. Before charging, ensure the wireless mouse is turned off.

Specifications

• Product Model: Elite MS400
• Officeworks Product Code: JBERGOV10M
• Bluetooth Version: 4.2
• Operating Voltage: DC 3.7V
• Operating Current: 10mA
• Working Frequency: 2.4GHz
• Rechargeable battery: Lithium 300mAh
• DPI: 1000 / 1600 / 2400
• Dimensions: 113.85 x 83.40 x 69.07 mm
• Charging cable length: 1 M
• System Requirements: Windows® 10 or later, Mac OS 10.10 or later, Android™ 10 or later, or iOS system.

Trademark Information:

Windows is a trademark of Microsoft Corporation. Mac and MacOS are trademarks of Apple Inc. Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Android is a trademark of Google LLC. iOS is a trademark or registered trademark of Cisco.

[Warning symbol] WARNING: Do not connect this cable to products other than the Elite MS400 wireless mouse. Connecting this cable to other devices might cause damage to both the cable and the device.

Product Warranty - Valid for Australian Customers Only

Officeworks Ltd warrants this product for 8 years from the date of purchase against defects and intended functionality. Officeworks will repair or replace the product at its discretion and expense if it has defects during the warranty period.

This warranty does not apply to:

• Cosmetic damage.
• Damage caused by consumables (e.g., batteries).
• Damage from failure to use in accordance with provided instructions.
• Damage arising from fair wear and tear.
• Damage from lack of reasonable use.
• Intentional or negligent damage.
• Damage resulting from attempted repairs by the customer.

To make a warranty claim, return the product with proof of purchase to an Officeworks store or contact 1300 633 423.

This warranty is in addition to rights under the Australian Consumer Law. Goods are guaranteed to be of acceptable quality. Consumers are entitled to a replacement or refund for a major failure and compensation for other reasonably foreseeable loss or damage.