Elecrow ESP32 AI Camera Development Board Vision Sensor Board

Түзмөктүн бөлүктөрү

1. Спикердин аталышы
2. RGB жарык
3. Al Button
4. MIC
5. UART аталышы
6. TF карта уячасы
7. Камера
8. Көмөкчү жарык
9. Калыбына келтирүү баскычы
10. Баяндамачы
11. Type-C порту
12. Power Light
13. Батарея жарык
14. BAT Header

Quick колдонмо

• Al Button:
  • In “Al Voice” mode, click to toggle the “Standby/Listening” status.
• Баштапкы абалга келтирүү:
  • Single-click to reboot after firmware flashing failure or device malfunction.
• Күч жарыгы:
  • The red LED is on steadily when powered.
• Батарея жарыгы:
  • When powered by the battery, the red light stays on while charging, and the green light stays on when fully charged.

Тармакты жупташтыруу

1. Plug in the Type-C cable to power on.
2. If you want to use the “Al Online” feature, you need to network pair and register the Al Agent first.
3. Open your phone/computer’s WiFi list, click on “Al_Camera_XXXX” to enter WiFi pairing mode.
   • Эгерде webpage does not open automatically, please visit 192.168.4.1 in your browser.
4. Choose an available 2.4GHz WiFi, enter the WiFi password, and click “Save Configuration”.
   • You can see your Wifi in “WiFi Network”.
   • Эскертүү: If you want to clear your network, open the “Settings” app, then open the “Configure Network”, and click “RECONFIGURE”.
5. Open the “Al Online” app, then open a browser and go to https://portal.thinknode.cc/ to access the Al Hub interface. If this is your first time logging in, you need to click the “Create Account” button to create an account.
6. After the account is successfully created and logged in, you will receive a 5000-point reward.
7. Click the “Al Hub” button to start “Add Agent”.
8. Click “Add Agent” and give your Al Agent a name.
9. Click “Manage devices (0)”, then click “Add Device”, enter the verification code, and confirm.
10. After completing “Add Device”, you can configure the character.
11. If you want to browse “Historical conversations”, you need to first enable “Local Short-term Memory” and save.
    • Эскертүү: If your 5000 points are used up, you need to click “Recharge” to purchase a plan that will allow you to regain points.

Негизги спецификациялар

• Продукт аты: Al Camera Module
• Негизги контроллер ESP32-S3R8
• Дисплей 1.83 дюймдук TFT-LCD сенсордук экран
• Пикселдер 2 депутат
• Зымсыз WiFi & Bluetooth 5.0
• Flash 16MB
• TF карта уячасы 128 ГБ чейин колдойт
• Интерфейс UART Interface. IC Pad
• Киргизүү 5V/1A
• Өлчөмдөр 56.05*44.5*18.6мм
• Иштөө температурасы -20°Cден 65°Cге чейин

Документтер / Ресурстар

Elecrow ESP32 AI Camera Development Board Vision Sensor Board [pdf] Колдонуучунун колдонмосу ESP32 AI Camera Development Board Vision Sensor Board, ESP32, AI Camera Development Board Vision Sensor Board, AI Camera Development Board Vision Sensor Board, AI Camera Development Board, Camera Development Board, Vision Sensor Board, Sensor Board

Шилтемелер

• User Manual