SCHLAGE 455A3

Schlage SP455A3 Kick Down Door Holder Instruction Manual

Model: 455A3 | Brand: SCHLAGE

1. Продукт бүтүп калдыview

The Schlage SP455A3 Kick Down Door Holder is designed to provide a simple and effective method for holding doors open. Constructed from cast aluminum with a bright brass finish, it features a 4-inch arm and a durable rubber foot for secure engagement with the floor surface. This unit is activated and released with a touch of the foot, offering convenient operation.

Schlage SP455A3 Kick Down Door Holder in Bright Brass finish

Figure 1: Schlage SP455A3 Kick Down Door Holder. This image displays the door holder with its 4-inch arm and rubber foot, presented in a bright brass finish.

Негизги өзгөчөлүктөрү:

  • Жөнөкөй операция: Engage and release the door holder with a foot.
  • Туруктуу курулуш: Made from cast aluminum for longevity.
  • Коопсуз кармоо: Features a rubber bottom to prevent slipping.
  • Optimal Clearance: Designed for doors with a door-to-floor clearance of 2 inches or less.
  • Бүтүрүү: Bright Brass.

2. Пакеттин мазмуну

Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз.

  • Schlage SP455A3 Kick Down Door Holder (1 unit)
  • Монтаждоочу жабдыктар (бурамалар)

3. Орнотуу боюнча нускамалар

This door holder is designed for door mount installation. Ensure the door-to-floor clearance is 2 inches or less for proper function.

Керектүү куралдар:

  • Карандаш
  • Өлчөө лентасы
  • Drill with appropriate drill bit (for pilot holes)
  • Бурагыч (Филипс башы сунушталат)

Орнотуу кадамдары:

  1. Монтаждоо ордун аныктоо: Position the door holder on the lower edge of the door, ensuring it is within reach for foot operation and that the rubber foot will make firm contact with the floor when engaged. The ideal location allows the door to open to the desired angle.
  2. Тазалоону текшерүү: With the door holder temporarily held in place, ensure that the distance from the bottom of the door to the floor is 2 inches or less. This ensures the rubber foot can effectively engage the floor.
  3. Бурама тешиктерин белгилөө: Using a pencil, mark the locations for the mounting screws through the pre-drilled holes on the door holder base.
  4. Бургулоочу тешиктер: Carefully drill pilot holes at the marked locations. Use a drill bit slightly smaller than the screw diameter to prevent wood splitting.
  5. Attach Door Holder: Align the door holder with the pilot holes and secure it firmly to the door using the provided mounting screws and a screwdriver. Do not overtighten.
  6. Сыноо операциясы: Once installed, test the door holder by pushing down on the arm with your foot to engage it and lifting it to release.

4. Иштөө нускамалары

The Schlage SP455A3 Kick Down Door Holder is designed for simple, foot-activated use.

  1. Тартуу үчүн: With your foot, gently press down on the top of the door holder's arm until the rubber foot makes firm contact with the floor and the door is held in place.
  2. Чыгаруу үчүн: With your foot, gently lift the arm of the door holder upwards. The rubber foot will disengage from the floor, allowing the door to move freely.

5. Техникалык тейлөө

Regular maintenance ensures optimal performance and extends the life of your door holder.

  • Тазалоо: Wipe the metal components with a soft, damp cloth to remove dust and grime. Avoid abrasive cleaners that may damage the finish.
  • Rubber Foot Inspection: Periodically check the rubber foot for wear or damage. A worn rubber foot may reduce the holder's ability to grip the floor. Replacement rubber tips may be available from the manufacturer.
  • Бурамаларды бекемдөө: If the door holder becomes loose, gently tighten the mounting screws. Do not overtighten.

6. Кыйынчылыктарды

КөйгөйМүмкүн себепЧечим
Door holder does not hold the door securely.
  • Door-to-floor clearance exceeds 2 inches.
  • Worn or damaged rubber foot.
  • Бурамалар бош.
  • Ensure proper door-to-floor clearance. The door holder may not be suitable for doors with larger gaps.
  • Inspect and replace the rubber foot if necessary.
  • Монтаждоо бурамаларын бекемдеңиз.
Door holder feels loose on the door.Монтаждоо бурамдары бош.Tighten mounting screws with a screwdriver.

7. Техникалык шарттар

АтрибутДеталь
БрендШЛАЖ
Модель номери455A3
Монтаж түрүDoor Mount
МатериалАлюминий, жез, резина
Түс/ФинишBright Brass
Arm Length / Size4 inches (4 in H)
Door-to-Floor Clearance2 дюйм же андан аз
Элемент Салмагы2.4 унция
Продукциянын өлчөмдөрү9.43 x 4.26 x 5.95 дюйм
Камтылган компоненттерDoor holder, Mounting Hardware
Батареялар талап кылынатЖок

8. Кепилдик жана колдоо

For specific warranty information, please refer to the documentation included with your product or visit the official SCHLAGE website. SCHLAGE products are backed by a commitment to quality and durability.

If you require technical assistance or have questions regarding your Schlage SP455A3 Kick Down Door Holder, please contact SCHLAGE customer support. Contact details are typically available on the manufacturer's webсайт же продукт таңгак.