KVC-S88UEE HDMI 18Gbps Matrix with Audio De Embedded
Thank You For Purchasing This Product
For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
Surge Protection Device Recommended
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shook, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.
Introduction
The 8×8 HDMI Matrix supports the transmission of video (up to 4K2K@60Hz YUV 4:4:4, 18Gbps, HDCP 2.2) and multi-channel digital audio from 8 HDMI sources to 8 HDMI displays. Audio de-embedded is supported from 8 HDMI output ports. Control is via button, IR, RS-232, LAN and Web GUI.
Features
☆ HDMI 2.0b, HDCP 2.2 and HDCP 1.4 compliant
☆ Up to 4K2K@60Hz (YUV 4:4:4) on all HDMI ports
☆ Supports pass-through audio up to 7.1 channels of High Definition audio (LPCM, Dolby True HD, and DTS-HD Master Audio)
☆ Audio de-embedded is supported via coax port
☆ HDR, CEC and smart EDID management supported
☆ Control is via on-panel Button, IR, RS-232, LAN and Web UI
☆ 1U rack mounted design with metal enclosure
Package Contents
① 1x 8×8 HDMI Matrix
② 1x 12V/3A Locking Power Adaptor
③ 1x Remote Control
④ 1x Wideband IR Receiver cable
⑤ 1x RS-232 male to female serial cable
⑥ 1x User Manual
Specifications
| Technical | |
| HDMI Compliance | HDMI 2.0b |
| HDCP Compliance | HDCP 2.2 and HDCP 1.4 |
| Video Bandwidth | 18Gbps |
| Video Resolutions | Up to 4K2K@50/60Hz (YUV 4:4:4), 4K2K@30Hz, 1080p@120Hz, and 1080p 3D@60Hz |
| Color Depth | 8-bit, 10-bit, 12-bit |
| Color Space | RGB, YCbCr 4:4:4, YCbCr 4:2:2 |
| HDMI Audio Formats | LPCM 2/5.1/7.1, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X |
| Audio Formats | PCM2.0, 32K/44.1K/48K/88.2K/96K/192K, 16/20/24bit |
| ESD Protection | Human-body Model: ±8kV (Air-gap discharge) , ±4kV (Contact discharge) |
| Connections | |
| Inputs | 8x HDMI Type A [19-pin female] 1x LAN [RJ45, Control] 1x RS-232 [9-pin D-sub, Control] 1x IR EXT [3.5mm Stereo Mini-jack] |
| Outputs | 8x HDMI Type A [19-pin female] 8x Coaxial Audio [RCA] |
| Mechanical | |
| Housing | Metal Enclosure |
| Color | Black |
| Dimensions | 483mm (W)×253mm (D)×44.5mm (H) |
| Weight | 3.35kg |
| Power Supply | Input: AC100~240V 50/60Hz, Output: DC12V/3A (US/EU standards, CE/FCC/UL certified) |
| Power Consumption | 26.5W (max) |
| Operating Temperature | 0°C ~ 40°C / 32°F ~ 104°F |
| Storage Temperature | -20°C ~ 60°C / -4°F ~ 140°F |
| Relative Humidity | 20~90% RH (non-condensing) |
Operation Controls and Functions
Front Panel
| Number | Name | Function descriptions |
| 1 | OLED display | Display system input/output port status, EDID management and matrix IP address. |
| 2 | IR Window | IR receiver window, it receives IR remote control signal to control this device. |
| 3 | Left/Right/Up/ Down/Menu Buttons | After system power up, the OLED screen default displays the input and output status of the last power off. A) On the initial OLED display, you can press the ‘Left’ or ‘Right’ button firstly to select output port, then press the ‘up’ or ‘down’ button to select the input port, then press the ‘MENU’ button to confirm this operation. B) On the initial OLED display, you can press the ‘Up’ or ‘Down’ button to check each input EDID setting, press the ‘Menu’ button go back to the initial OLED display. C) On the initial OLED display, you can press ‘Menu’ button to operate the following functions by the combination of these five buttons, press ‘Up’ or ‘Down’ button to select function:
|
| 4 | Power and Power LED | Long press this button to power on/off device. The LED will illuminate in green when the device is power on and show in red when this device is standby. |
The EDID table:
| EDID Mode | EDID Description |
| 1 | 720P 2.0 CH |
| 2 | 1080P 2.0 CH |
| 3 | 1080P 5.1 CH |
| 4 | 1080P 7.1CH |
| 5 | 1080I 2.0 CH |
| 6 | 1080I 5.1 CH |
| 7 | 1080I 7.1CH |
| 8 | 3D 2.0 CH |
| 9 | 3D 5.1 CH |
| 10 | 3D 7.1 CH |
| 11 | 4K*2K@30 2.0 CH |
| 12 | 4K*2K@30 5.1 CH |
| 13 | 4K*2K@30 7.1 CH |
| 14 | 4K60_420 2.0CH |
| 15 | 4K60_420 5.1CH |
| 16 | 4K60_420 7.1CH |
| 17 | 4K*2K@60 2.0 CH |
| 18 | 4K*2K@60 5.1 CH |
| 19 | 4K*2K@60 7.1 CH |
| 20 | Copy HDMI Out A |
| 21 | Copy HDMI Out B |
| 22 | Copy HDMI Out C |
| 23 | Copy HDMI Out D |
| 24 | Copy HDMI Out E |
| 25 | Copy HDMI Out F |
| 26 | Copy HDMI Out G |
| 27 | Copy HDMI Out H |
Rear Panel
| Number | Name | Function descriptions |
| 1 | HDMI INPUT | Connect to the HDMI input source devices such as a DVD player or Set-top Box. |
| 2 | HDMI OUTPUT | Connect to the HDMI output source devices such as a TV player or monitor. |
| 3 | IR EXT | If the front IR sensor of unit is obstructed or the unit is installed in a closed area out of infrared line of sight, the IR receiver cable can be inserted to this IR EXT port to extend IR signal. |
| 4 | DC 12V | Plug the 12V/3A adapter to AC wall outlet for power supply. |
| 5 | CONTROL | LAN: connects to an active Ethernet link by an RJ-45 cable. RS-232: Connect to a PC or control system by D- Sub 9-pin cable to control the matrix with RS-232 commands. |
| 6 | AUDIO OUTPUT | Connect to audio amplifiers or speakers. |
| 7 | GND | Connect the GND port to the ground. |
Remote Control
: Power on or set it to standby status.
Input 1/2/3/4/5/6/7/8: Press these button to select input signal source.
: Press these button to select the last or the next input signal source.
Output 1/2/3/4/5/6/7/8: Press these button to select output signal source.
All: Press this button to select all output signal source simultaneously.
Operating instructions: User need select output button firstly and then select input button to select output display corresponding input signal source.
Web GUI User Guide
The Matrix can be controlled via Web GUI. You must know current Matrix IP address. The static IP address is 192.168.1.100. You can connect PC Web GUI through dynamic IP address. Generally speaking, you can get IP address from two ways. The first way gets the IP address via Upper Controller . The second way gets IP address via on-panel button. Then you need set the IP address to your PC or laptop or mobile device is within the same IP address segment with the Matrix. After above, you can enter the Matrix IP address in the web browser to access Web GUI.
The first way: The Matrix gets IP address via Upper Controller. The RS-232 port connects USB port on PC. The LAN port and the PC connect the same a router device. At this time, you need open the Upper Computer software of the product. The page likes below:
Select the “TCP Control Mode” port, then click the “Search” button. At this moment, you can get current IP address. You can set the IP address to your PC Internet Explorer and click “Search” to enter Web GUI page.
Note: In the same network segment and IP address, you can use other tools to connect the product’s WEB GUI such as PC/iPad/laptop etc.
The second way: The Matrix gets IP address via on-panel button. On the initial OLED display, you can press “Menu” button to enter function page.
Then press “Up” or “Down” button to select function. When select the “View IP” function, then press the “Right” button to check current IP address and DHCP status. At this moment, you can get current IP address.
Step 1: The LAN port connects directly PC with an UTP cable.
Step 2: On the PC, go to Control Panel > Network and Internet > Network Connections > Local Area Connections, right click on it, choose Properties.
Double click Internet Protocol Version 4 (TCP/IPv4)
Choose Use the following IP address, input 192.168.1.200 as IP address, 255.255.255.0 as Subnet mask, and then click on OK, click on OK again.
Note: The IP address of the computer and matrix should be in the same network segment. As the matrix’s IP address is 192.168.10.100, the computer’s IP should be 192.168.10.X (X contains 1~255 except 100).
Step 3. Input the IP address from front panel into a brower on the PC to enter Web GUI page, The pages like below.
The Web GUI likes below:
General page
① Click this button to check current the Matrix connection status.
② Display currently the Matrix input and output port status. The “yes” have connected input or output source and “no” represent not connection.
③ Power switch. The Matrix will work when open this switch. Otherwise, the Matrix will standby.
④ Beep switch. Open this switch, press the Matrix on-panel button will have voice. Close this switch, it will mute.
⑤ Click this button will reboot device.
⑥ Click this button will set it to factory reset.
Matrix page
① You need click green area and then choose one input source to the OUTPUT A port. (The others OUTPUT ports have similar to function about Tab ①.)
EDID page
① Select EDID mode to input source, then click “Set” button.
② Copy EDID from output display to input source, then click “Set” button.
③ Open EDID file to input source.
④ Display the input source EDID mode status.
Network page
① Network Configuration
◆ In DHCP open status:
DHCP switch: Obtian the network configuration information, including IP address, Subnet, Gateway and MAC. Then click “Set” button to save DHCP status.
◆ In DHCP close status:
DHCP switch: If the DHCP switch has been closed, user can set IP, Subnet, Gateway and Mac address. In this moment, click the “Set” button to save current status information. (Note: If user have set a new IP address and click the “Set” button. At this moment, user have changed the IP address.)
Net Status button: Click this button will refresh currently network configuration information to display in Status Log.
② Status Log: Display the Net configuration information.
③ Clear button: Clear the Status Log information.
Upgrade page
① Open upgrade file, then click the “Upgrade” button.
FAQ
1. Q: Does this product require an HDMI line length for the connection interface?
A: According to HDMI line length test, HDMI input / output with 4K2K@60Hz YUV 4:4:4 is the longest line length up to 16.4ft / 5m.
The use of “Premium High Speed HDMI” cable is highly recommended.
Application Example
Documents / Resources
 |
KVC KVC-S88UEE HDMI 18Gbps Matrix with Audio De Embedded [pdf] User Manual KVC-S88UEE HDMI 18Gbps Matrix with Audio De Embedded, KVC-S88UEE, HDMI 18Gbps Matrix with Audio De Embedded, Matrix with Audio De Embedded, Audio De Embedded |
