MOUNTUP MU0034 Single Monitor Desk Mount Manual Instruction

1. Destpêk

This manual provides detailed instructions for the installation, operation, and maintenance of your MOUNTUP MU0034 Single Monitor Desk Mount. Please read this manual thoroughly before installation to ensure correct setup and safe operation. This monitor mount is designed to enhance your workspace ergonomics by providing adjustable positioning for a single monitor.

2. Agahiyên Ewlekariyê

• Ensure all components are present and undamaged before installation. Do not use if any parts are missing or faulty.
• This product is intended for monitors weighing up to 17.6 lbs (8 kg) and screen sizes from 17 to 32 inches. Do not exceed the maximum weight capacity.
• Compatible VESA patterns are 75x75mm and 100x100mm. Verify your monitor's VESA pattern before proceeding.
• Ensure the desk surface is stable and strong enough to support the combined weight of the mount and monitor.
• Tighten all screws firmly, but do not overtighten to avoid stripping threads or damaging components.
• Di dema sazkirinê de zarok û heywanên heywanan dûr bigirin.
• Heke di derbarê pêvajoya sazkirinê de gumanên we hebin, ji kerema xwe bi pisporek pispor re şêwir bikin.

3. Naveroka pakêtê

Ji kerema xwe piştrast bikin ku hemî beş di pakêta we de ne:

• Kombûna Milê Monîtorê
• Desk Clamp Bingeh
• Grommet Base Components
• Plate VESA
• Hardware Kit (screws, washers, Allen keys)
• Manual Instruction

4. Specifications

5. Sazkirin û Sazkirin

The MOUNTUP MU0034 offers two installation options: C-clamp mounting and Grommet mounting. Choose the method suitable for your desk.

5.1. C-Clamp Mounting

This method is for desks without existing grommet holes, or if you prefer clamping to the edge of your desk. Ensure your desk thickness is no more than 3.35 inches.

1. C-cl girêdinamp: Assemble the C-clamp components to the base of the monitor arm. Position the base on the edge of your desk and tighten the clamp screw until it is secure.
2. Plateya VESA bi Monitorê ve girêdin: Secure the VESA plate to the back of your monitor using the appropriate screws from the hardware kit. Ensure the screws are tightened securely.
3. Slide Monitor onto Arm: Carefully slide the monitor (with the attached VESA plate) onto the monitor arm's VESA head. Ensure it clicks into place or is secured with the provided locking mechanism.
4. Tansiyonê Birêkûpêk Bike: Refer to Section 6.1 for adjusting the gas spring tension to match your monitor's weight.

Figure 1: Illustration of C-clamp and Grommet mounting options. The C-clamp is shown securing the mount to the desk edge, while the grommet mount uses a desk hole.

Figure 2: The removable VESA plate being attached to the back of a monitor, then sliding onto the monitor arm for easier installation.

5.2. Grommet Mounting

This method utilizes an existing hole in your desk. Ensure your desk thickness is no more than 3.35 inches and the grommet hole diameter is between 0.39 and 3.1 inches.

1. Assemble Grommet Base: Insert the grommet base components through the desk hole and secure them from underneath the desk using the provided plate and nut.
2. Plateya VESA bi Monitorê ve girêdin: Secure the VESA plate to the back of your monitor using the appropriate screws from the hardware kit. Ensure the screws are tightened securely.
3. Slide Monitor onto Arm: Carefully slide the monitor (with the attached VESA plate) onto the monitor arm's VESA head. Ensure it clicks into place or is secured with the provided locking mechanism.
4. Tansiyonê Birêkûpêk Bike: Refer to Section 6.1 for adjusting the gas spring tension to match your monitor's weight.

6. Xebitandin û Sererastkirin

The MOUNTUP MU0034 monitor arm offers various adjustments for optimal viewing handan.

6.1. Gas Spring Tension Adjustment

The gas spring tension needs to be adjusted to match the weight of your monitor. This ensures the monitor stays in position once adjusted.

• If the monitor drifts down, turn the adjustment screw (usually located on the arm joint) clockwise ("+") to increase tension.
• If the monitor floats up, turn the adjustment screw counter-clockwise ("-") to decrease tension.
• Adjust gradually until the monitor remains stable at any height.

Figure 3: Instructions for adjusting the gas spring tension using an Allen key. Turning clockwise increases tension, counter-clockwise decreases it.

6.2. Rêzkirina Bilindahiyê

Once the gas spring tension is correctly set, you can easily raise or lower your monitor to your desired ergonomic height. The arm allows for up to 11 inches of vertical adjustment.

Figure 4: Diagram illustrating the maximum height adjustment of 11 inches and maximum extension of 17.5 inches.

6.3. Tilt, Swivel, and Rotation

The monitor arm provides full motion capabilities:

• Tilt Adjust the monitor screen +45° to -45° to reduce glare or find a comfortable viewAngle.
• Swivel: The arm can swivel 360° at the base and 360° at the middle joint. The monitor plate itself can swivel 180°. This allows for easy screen sharing or repositioning.
• Zivirandin: Rotate the monitor 360° to switch between landscape and portrait orientations.

Figure 5: Visual representation of the monitor arm's full motion capabilities, including 360° swivel, 180° swivel at the monitor plate, and +45° to -45° tilt.

Figure 6: An image demonstrating the monitor's ability to rotate 360 degrees, allowing for both landscape and portrait viewmodên ing.

7. Birêvebirina kabloyê

The MOUNTUP MU0034 features integrated cable management to keep your workspace tidy.

1. Route your monitor cables (power, video, etc.) along the underside of the arm.
2. Use the provided cable clips or covers to secure the cables within the arm channels.
3. Ensure cables have enough slack to allow for full range of motion without tension.

Figure 7: Illustration of how cables are routed and organized through the integrated channels on the monitor arm, keeping the desk clear.

8. Maintenance

• Hemû pêç û girêdan bi rêkûpêk kontrol bikin da ku ew hişk bimînin.
• Çenteyê bi nermikek paqij bikin, damp qumaş. Ji paqijker an çareserkerên aşınker dûr bisekinin.
• Mekanîzmaya bihara gazê rûn nekin.

9. Destpêkirin

10. Garantî û Piştgirî

The MOUNTUP MU0034 Single Monitor Desk Mount is backed by a 3-year support period. For technical assistance, missing parts, or warranty claims, please contact MOUNTUP customer support through their official channels or the retailer where the product was purchased.

Ji kerema xwe delîla kirînê ji bo armancên garantiyê biparêzin.