Kramer WP-DEC7 Us Panel Set User Guide

Check what’s in the box
- For EU: 1 faceplate, 1EU frame, and 1 UK frame
- For the US: 2 US-D faceplates, 1 US-D frame bracket and 1 US-D frame
- 1 Quick start guide
Install the Panel Set
After mounting the device (see www.kramerav.com/downloads/WP-DEC7 Panel Set) mount the faceplates (US) and frames as shown in the illustrations below:
We recommend that you use any of the following standard 2 gang in-wall junction boxes (or their equivalent):
US Version

- US-D: 2 gang US electrical junction boxes.
- EU: 2 gang in-wall junction box, with a cut-hole diameter of 2x68mm and depth that can fit in both the device and the connected cables (DIN 49073).
- UK: 2 gang in-wall junction box (BS 4662), 135x75mm (W, H) and depth that can fit in both the device and the connected cables.
European Version

EU/UK: 2 gang on-wall junction box (use the recommended Kramer onwall box available at
www.kramerav.com/product/WP -DEC7 Panel Set
DECORA® design frames are included in US-D models.
DECORA® is a registered trademark of Leviton MANUFACTURING Co., Inc.

Documents / Resources
![]() | WP-DEC7 Us Panel Set |
References
- No resources foundwww.kramerav.com
- Kramer Pro AV manufacturer - Product Categorieswww.kramerav.com
- Kramer Pro AV manufacturer - Product Categorieswww.kramerav.com
- User Manualmanual.tools
Published: May 18, 2023
Updated: May 19, 2023

