Kramer T-IN2-REC2 Table In Surface
Product Information
Specifications
- Models: T-IN2-REC2, T-IN4-REC2, T-IN6-REC2
- Part Number: 2900-301780QS
- Recommended Table Thickness: 10-50 mm (0.39 – 1.97 inches)
- Color Options: Black, White, Aluminum
Product Usage Instructions
Step 1: Check What’s in the Box
Ensure you have the enclosure sheet metal box, locking device, magnet frame, and cutout template.
Step 2: Table Cutout Dimensions
Use the provided cutout template and a hole saw for precise dimensions.
Step 3: Remove Outer Frame
- Detach the magnet frame and keep screws until securing to the table.
- Fit the frame to a table thickness between 10-50 mm.
Step 4: Slide Modules
Install modules as per the Modules List section.
Step 5: Lock Module
- Lift the cover plate and position the locking device.
- Secure the inserts with a screwdriver by half a turn.
- Replace the cover plate.
Step 6: Place Outer Frame
Position the magnet frame back in place.
FAQ
Q: Where can I download the latest user manual and firmware upgrades?
A: Visit www.kramerav.com/downloads/T-IN2-REC2, www.kramerav.com/downloads/T-IN4-REC2, or www.kramerav.com/downloads/T-IN6-REC2.
Quick Start Guide
This guide helps you install and use your T-IN2-REC2, T-IN4-REC2, T-IN6-REC2 for the first time.
Go to www.kramerav.com/downloads/T-IN2-REC2, www.kramerav.com/downloads/T-IN4-REC2 & www.kramerav.com/downloads/T-IN6-REC2 to download the latest user manual and check if firmware upgrades are available.
Assembly Instructions
Step 1: Check What’s in the Box
The color of the sheet metal box, locking device, and magnet frame are supplied in the same color as selected for the TBUS.
- Enclosure sheet metal box (identical to selected TBUS color)
- Black/White locking device (identical to selected TBUS color)
- Magnet frame (according to the requested TBUS color)
- Cutout template
For White or Aluminum frame and/or White locking device, order separately frame and locking device accordingly.
Step 2: Table Cutout Dimensions
- T-IN2-REC2 – 134 X 89mm (5.28″ x 3.5″)
- T-IN4-REC2 – 234 X 89mm (9.21″ x 3.5″)
- T-IN6-REC2 – 334 X 89mm (13.15″ x 3.5″)
Kramer recommends using the cutout template (packed with device) and a hole saw for maximal accuracy.
Step 3: Remove Outer Frame
Remove the magnet frame and place it aside. 
Step 4: Place Enclosure – Fasten Screws
- Keep screws until the ‘dog ear’ is fastened to the table.
- Fit to standard table thickness between 10- 50 mm (0.39” – 1.97”).
Step 5: Slide Modules
- Some modules are missing grooves – please follow the comments in the ‘Modules list’.
- Locking devise should be placed on narrow slides as shown below.
Modules listed in Modules List section
Step 6: Lock Module
- Lift the cover plate and place locking device in position.
- Lock the inserts by half a turn with a screwdriver.
- Place back the cover plate.
Step 7: Place Outer Frame
Locate the magnet frame in position.
Documents / Resources
 |
Kramer T-IN2-REC2 Table In Surface [pdf] User Guide T-IN2-REC2, T-IN4-REC2, T-IN6-REC2, T-IN2-REC2 Table In Surface, T-IN2-REC2, Table In Surface, In Surface, Surface |
