Kramer-LOGO

Kramer T-IN2-REC1 Baseline In Table Elegant Tabletop

Kramer-T-IN2-REC1-Baseline-In-Table-Elegant-Tabletop-PRODUCT

Specifications

  • Models: T-IN2-REC1, T-IN4-REC1, T-IN6-REC1
  • Color: Black (White or Aluminum frame and/or White locking device available separately)
  • Table Thickness Compatibility: 10-50 mm (0.39 – 1.97 inches)
  • Quick Start Guide P/N: 2900-301808 QS,
  • Rev: 3

INSTALLATION AND USING INSTRUCTIONS

Step 1: Check What’s in the Box

 

Kramer-T-IN2-REC1-Baseline-In-Table-Elegant-Tabletop-FIG- (1)The 4 products listed above represent the basic order.

  • Kramer-T-IN2-REC1-Baseline-In-Table-Elegant-Tabletop-FIG- (2)Enclosure sheet met
  • Kramer-T-IN2-REC1-Baseline-In-Table-Elegant-Tabletop-FIG- (2)Black Locking device
  • Kramer-T-IN2-REC1-Baseline-In-Table-Elegant-Tabletop-FIG- (2)Black frame
  • Kramer-T-IN2-REC1-Baseline-In-Table-Elegant-Tabletop-FIG- (2)Cutout templateKramer-T-IN2-REC1-Baseline-In-Table-Elegant-Tabletop-FIG- (3)
    • Kramer-T-IN2-REC1-Baseline-In-Table-Elegant-Tabletop-FIG- (4)For White or Aluminum frame and/or White locking device, order separately frame and locking device accordingly.

Step 2: Table Cutout Dimensions

  • T-IN2-REC1 – 131 x 58mm (5.16″ x 2.28″)
  • T-IN4-REC1 – 231 x 58mm (9.09″ x 2.28″)
  • T-IN6-REC1 – 331 x 58mm (13.03 ” x 2.28″)

Kramer-T-IN2-REC1-Baseline-In-Table-Elegant-Tabletop-FIG- (1)Kramer recommends using the cutout template (packed with device) and a hole saw for maximal accuracy.

Step 3: Place Enclosure – Fasten Screws

  1. Tighten screws until the frame is tightly clamped to the table.
  2. Fit to standard table thickness between 10-50 mm (0.39” – 1.97”).Kramer-T-IN2-REC1-Baseline-In-Table-Elegant-Tabletop-FIG- (5)

Step 4: Slide Modules

  • Kramer-T-IN2-REC1-Baseline-In-Table-Elegant-Tabletop-FIG- (1)Some modules are missing grooves – please follow the comments in the ‘Modules list’.
  • Locking device should be placed on narrow slides as shown below.Kramer-T-IN2-REC1-Baseline-In-Table-Elegant-Tabletop-FIG- (6) Kramer-T-IN2-REC1-Baseline-In-Table-Elegant-Tabletop-FIG- (7)
    • * Modules listed in Modules List section

Step 5: Lock Module

  1. Lift the cover plate and place locking device in position.
  2. Lock the modules by turning
    • Locking device mechanism a quarter turn (full turn 360⁰, half turn 180⁰, 90⁰ does the job).
  3. Place back the cover plate.Kramer-T-IN2-REC1-Baseline-In-Table-Elegant-Tabletop-FIG- (8) Kramer-T-IN2-REC1-Baseline-In-Table-Elegant-Tabletop-FIG- (9)

MORE INFO

FAQs

Documents / Resources

Kramer T-IN2-REC1 Baseline In Table Elegant Tabletop [pdf] User Guide
T-IN2-REC1, T-IN4-REC1, T-IN6-REC1, T-IN2-REC1 Baseline In Table Elegant Tabletop, T-IN2-REC1, Baseline In Table Elegant Tabletop, Table Elegant Tabletop, Elegant Tabletop, Tabletop

References

Leave a comment

Your email address will not be published. Required fields are marked *