kramer ACC3-12-SP Audio Visual Signal Management
Product Information
Specifications:
- Model: ACC3-12-SP
- Type: 1:2 CAT Cable Splitter
- Ports:
- CAT A+B RJ-45 Port
- CAT A RJ-45 Port
- CAT B RJ-45 Port
Product Usage Instructions
Step 1: Check what’s in the box
Make sure you have the following items:
- ACC3-12-SP
- 1:2 CAT Cable Splitter
- Quick start guide
- Bracket set
- 4 Rubber feet
Step 2: Get to know your ACC3-12-SP
The ACC3-12-SP has the following features:
- CAT A+B RJ-45 Port: Connect this port to a compatible CAT transmitter, such as an SWT3-41-U-T, to send combined signals over the A+B port.
- CAT A RJ-45 Port: Connect this port to a compatible CAT receiver, such as an EXT3-UE-R or EXT3-U-R.
- CAT B RJ-45 Port: Connect this port to a compatible CAT receiver, such as an EXT3-UE-R or EXT3-U-R.
Step 3: Mount ACC3-12-SP
You can install the ACC3-12-SP using one of the following methods:
- Refer to the full user manual for detailed mounting instructions.
Step 4: Connect inputs and outputs
Before connecting any devices to your ACC3-12-SP, ensure that the power is switched OFF on each device.
FAQ
Q: Where can I download the full user manual and check for firmware upgrades?
A: You can download the latest user manual and check for firmware upgrades from the official Kramer website at www.kramerav.com/downloads/ACC3-12-SP.
Scan for full manual
This guide helps you install and use your ACC3-12-SP for the first time.
Go to www.kramerav.com/downloads/ACC3-12-SP to download the latest user manual and check if firmware upgrades are available.
Step 1: Check what’s in the box
- ACC3-12-SP 1:2 CAT Cable Splitter
- 1 Bracket set
- 4 Rubber feet
- 1 Quick start guide
Step 2: Get to know your ACC3-12-SP
| # | Feature | Function |
| 1 | CAT A+B RJ-45 Port | Connect to a compatible CAT transmitter (for example an SWT3-41-U-T) to send combined signals over the A+B port. |
| 2 | CAT A RJ-45 Port | Connect to a compatible CAT receiver (for example an EXT3-UE-R, EXT3-U-R). |
| 3 | CAT B RJ-45 Port | Connect to a compatible CAT receiver (for example an EXT3-UE-R, EXT3-U-R). |
Step 3: Mount ACC3-12-SP
Install ACC3-12-SP using one of the following methods:
- Attach the rubber feet and place the unit on a flat surface.
- Fasten a bracket (included) on each side of the unit and attach it to a flat surface (see www.kramerav.com/downloads/ACC3-12-SP).
- Mount the unit in a rack using the recommended rack adapter (see www.kramerav.com/product/ACC3-12-SP).
- Ensure that the environment (e.g., maximum ambient temperature & air flow) is compatible for the device.
- Avoid uneven mechanical loading.
- Appropriate consideration of equipment nameplate ratings should be used for avoiding overloading of the circuits.
- Reliable earthing of rack-mounted equipment should be maintained.
Step 4: Connect inputs and outputs
Always switch OFF the power on each device before connecting it to your ACC3-12-SP.
Documents / Resources
 |
kramer ACC3-12-SP Audio Visual Signal Management [pdf] User Guide ACC3-12-SP Audio Visual Signal Management, ACC3-12-SP, Audio Visual Signal Management, Visual Signal Management, Signal Management |