KONIG AND MEYER 201-2 Microphone Stand
Product Information
Specifications
- Product Name: 201/2 Microphone Stand
- Color: Black
- Model Number: 20120-300-55
- Revision: 05
Product Usage Instructions
Assembly
- Attach the cable holder (Position 1) to the base with legs (Position 2).
Usage
To set up the microphone stand, follow these steps:
- Extend the foot tube complete (Position 4) to the desired height.
Spare Parts List
| Position | Description | Article No. | Quantity |
| 1 | Cable holder | 01-85-970-55 | 1 |
| 2 | Base with legs | 3-00-000-025 | 1 |
| 3 | Cylinder head screw M5 x 36 mm | 03-02-176-29 | 3 |
| 4 | Foot tube complete | 6-82723-1-55 | 3 |
| 5 | Square nut M5 | 03-08-210-29 | 3 |
| 6 | End cap | 01-84-882-55 | 3 |
| 7 | Clamping piece with pin R10 complete | 6-86642-1-55 | 1 |
| 8 | Knurled screw with logo M6 x 16 mm | 01-82-948-55 | 1 |
| 9 | Extension rod, plastic stop and threaded bolt | 6-21020-1-55 | 1 |
| 10 | Clutch with tension ring | 3-00-000-018 | 1 |
| 11 | Aluminum knurled washer | 03-31-550-15 | 1 |
11 / 2022 · KÖNIG & MEYER GmbH & Co. KG · Kiesweg 2 · 97877 Wertheim/Main · Germany
- e-Mail: contact@k-m.de
- www.k-m.de
Frequently Asked Questions
- Q: How do I adjust the height of the microphone stand?
A: To adjust the height, loosen the knurled screw with logo (Position 8), adjust the extension rod (Position 10) as needed, and then tighten the knurled screw to secure the height.
Documents / Resources
 |
KONIG AND MEYER 201-2 Microphone Stand [pdf] Instructions 20120-300-55, 201-2 Microphone Stand, 201-2, Microphone Stand, Stand |
