Kogan com KANNOTCONTA Note Counter Instruction Manual

Kogan com KANNOTCONTA Note Counter

Kogan com KANNOTCONTA Note Counter

Kogan com KANNOTCONTA Note Counter

Safety & Warnings

  • Ensure the machine is operated using the required voltage and frequency.
  • Ensure the work surface is secure, stable, and level.
  • Clips, staples, elastic bands, or coins may block the machine. Check banknotes carefully before counting.
  • Do not place deformed, folded, or badly damaged notes on the feeding tray.
    • Deformed
      Safety & Warnings
    • Folded
      Safety & Warnings
    • Broken
      Safety & Warnings
  • Do not count wet, sticky, or heavily soiled banknotes.
  • Align and straighten the banknotes evenly to help prevent jamming and counting errors.
    Safety & Warnings
  • Place banknotes neatly into the counting tray. Slightly bend or fan the notes to form an even slope for smoother feeding.
    Safety & Warnings
  • The motor includes a temperature control function and will automatically shut down if the internal temperature reaches 100-120°C (approximately 20-30 minutes of continuous operation). To extend the service life of the machine, allow it to rest for 10 minutes after every 2 minutes of continuous use.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or a lack of experience and knowledge, unless they have been given supervision or instruction by a person responsible for their safety.
  • Children must be supervised to ensure they do not play with the appliance.

Operation

Value/Denomination Selection

  • Press the ‘VALUE/+’ button to select the denomination you want to count.
  • Press the button repeatedly to cycle through the following options:
  • Press once: Display shows ‘VALUE TOTAL 5’ (counts AUD $5 notes).
  • Press twice: Display shows ‘VALUE TOTAL 10’ (counts AUD $10 notes).
  • Press 3 times: Display shows ‘VALUE TOTAL 20’ (counts AUD $20 notes).
  • Press 4 times: Display shows ‘VALUE TOTAL 50’ (counts AUD $50 notes).
  • Press 5 times: Display shows ‘VALUE TOTAL 100’ (counts AUD $100 notes).
  • Press 6 times: Exits this function.
    Operation

Batch Counting

  • Press the ‘BATCH’ button to set a batch quantity (the number of notes to count before stopping).
  • Press the button repeatedly to select:
  • Press once: Display shows ‘100’ (counts 100 pcs then stops automatically).
  • Press twice: Display shows ‘50’ (counts 50 pcs then stops automatically).
  • Press 3 times: Display shows ‘20’ (counts 20 pcs then stops automatically).
  • Press 4 times: Display shows ‘10’ (counts 10 pcs then stops automatically).
  • Press 5 times: Exits this function.
  • To set a custom number (e.g. 55 pcs or 45 pcs):
  • Press ‘BATCH’ twice (to select 50), then press ‘VALUE/+’ or ‘FUN/-‘ to adjust the quantity.
    Batch Counting

Accumulation Counting

  • Press the ‘ADD’ button to enable accumulation counting.
  • The machine adds each counting result to the previous total.
  • Example: First count 10 pcs + second count 20 pcs = display shows ‘30 pcs’.
  • If you continue and the third count is 30 pcs, the display shows ’60 pcs’.
    Accumulation Counting

Total Amount

You can use Value/Domination Selection together with Accumulation Counting to count banknotes of different denominations and calculate the total amount.
Total Amount

IR/UV Detection Mode

Press ‘FUN/-‘ to select IR UV mode or IR mode.

IR UV Mode

  • In IR UV mode, the machine detects notes with a UV reaction (for example, white paper).
  • If the note counter detects white paper while counting, it stops counting, plays an audio tone, and the screen turns red.
    IR UV Mode

Note:

This does not mean the machine can identify all counterfeit banknotes. It has limited counterfeit detection capability and can only detect some white paper or cards.

IR Mode

  • In IR mode, the machine cannot detect white paper in the counted notes.
  • However, counting is more accurate and produces fewer errors.

Manual Mode/Auto Mode

Press and hold the ‘RESTART’ button to switch between Auto mode and Manual mode.

  • Auto Mode: The note counter starts counting automatically when you place cash into the counting tray.
  • Manual Mode: Place the cash into the counting tray, then press ‘RESTART’ to begin counting.

Customer Support

Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.Kogan.com.
Logo

Documents / Resources

PDF thumbnailKANNOTCONTA Note Counter
Instruction Manual · KANNOTCONTA Note Counter, KANNOTCONTA, Note Counter, Counter

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask a question about setup, compatibility, troubleshooting, or anything missing from this manual.