KOBALT 6309481 2 Drawer Adjustable Height Workbench Table Instruction Manual

Determine the front and back of the top before starting. The
front has the Kobalt badge on the edge.
Attach the right leg (B) to the wood top (A) using four M6 x15L
screws (AA), ensuring the rotating mechanism faces the inside of
the work table. Do not overtighten.

Attach the left leg (E) to the wood top (A) using four M6 x 15L
screws (AA). Finger tighten only and ensure the rotating rod (G)
clicks into the leg (E).
Attach the rotating rod (G) to the rotating mechanism in the
leg (B).

Attach the top rail (F) to the wood top (A), leg (B), and leg
(E) using eighteen M6 x 15L screws (AA). Do not overtighten.
Option 1: Attach the stability bar (H) to the bottom of the leg
(B) and leg (E) using four M8 x 25L bolts (BB) and four M8 washers
(CC). Finger tighten only.

Option 2: Attach the stability bar (H) to the bottom of the leg
(B) and leg (E) using four M8 x 25L bolts (BB) and four M8 washers
(CC). Finger tighten only.

Usage Instructions

Ensure you follow all safety instructions provided in the
manual.

Avoid placing items exceeding the maximum capacity on the
workbench table.
Do not drag the workbench table to move it; it is heavy and may
cause damage.

Use safety goggles when working with tools during assembly or
maintenance.

Frequently Asked Questions

Q: What should I do if I encounter missing parts during
assembly?

A: Before returning to your retailer, contact customer service
at 888-3KOBALT for assistance.

Q: Can I exceed the maximum weight capacity of the
drawers?

A: It is not recommended to exceed the specified weight capacity
to prevent damage to the product.

“`

View Fullscreen

ITEM #6309481
2-Drawer Adjustable Height Workbench Table
MODEL #410-096-0131
Español p. 11

ATTACH YOUR RECEIPT HERE Serial Number

Purchase Date

Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 888-3KOBALT (888-356-2258), 8 a.m – 8 p.m., EST, Monday – Sunday. You could also contact us at ascs@lowes.com.

SS23419 1

TABLE OF CONTENTS
Safety Information ……………………………………………………………………………………………………………….2 Package Contents ……………………………………………………………………………………………………………….3 Hardware Contents ……………………………………………………………………………………………………………..4 Assembly Instructions ………………………………………………………………………………………………………….5 Operation Instructions ………………………………………………………………………………………………………….8 Care and Maintenance …………………………………………………………………………………………………………9 Replacement Parts List ………………………………………………………………………………………………………10
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble or operate this product. Failure to follow may result in serious injury. Save all warnings and instructions for future reference.
WARNING · Due to the product’s weight, it is recommended that 2 or more people help assemble
and move this workbench to help reduce the risk of injury. · Keep the product on a level surface. The product may become unstable and
tip if stored or moved on an uneven surface. · Keep the locking caster brakes set unless you are moving the cart.
This will help to prevent the product from rolling.
CAUTION: · Check screws and bolts periodically for tightness. · Do not let children approach the tool cart. · Do not lift this product directly with a forklift or tow with any mechanical devices. · Do not exceed the maximum product weight, including contents.
Do not exceed the maximum weight for each drawer. See Specifications on page 4. · Only transport this product when empty. Properly secure when transporting. · Do not alter this product in any manner as it will void the warranty.
DANGER: · Do not stand on this product. You may fall or cause the product to tip. · Do not move the product prior to closing and locking all the drawers.
The drawers could come open and make the product unstable and tip. · Do not mount this product on a truck bed or any other moving object. · Do not open more than one drawer at a time.
2

PACKAGE CONTENTS
A

G
L E

I
J K

PART
A B C D E F G

DESCRIPTION
Wood Top Leg (Right) Crank Handle Leveling Feet Leg (Left) Top Rail Rotating Rod

QUANTITY
1 1 1 4 1 1 1

PART
H I J K L M N

DESCRIPTION
Stability Bar Caster Drawer Slide (Pair) Drawer Drawer Side Panel Back Panel Front Panel

QUANTITY
1 4 2 2 2 1 1

HARDWARE CONTENTS
TOOLS REQUIRED
Phillips screwdriver

Safety goggles

HARDWARE INCLUDED NOTE: Hardware not shown to actual size.

PART
AA BB CC DD

DESCRIPTION
Screw M6 x 15L Bolt M8 x 25L Washer M8 10-14mm Wrench

QUANTITY
38 4 4 1

PRODUCT SPECIFICATIONS

COMPONENTS Maximum Capacity (Drawer) Maximum Capacity

SPECIFICATIONS 35 lbs. 300 lbs.

Note: Begin product assembly close to the final intended location of your workbench.
This product is heavy and may be difficult to move after assembly.

ASSEMBLY INSTRUCTIONS

1. While unpacking the unit, you can leave the workbench wood top (A) inside the original packaging to prevent the top from being scratched during assembly.
2. Determine the front and back of the top before starting. The front of the wood top (A) has the Kobalt badge on the edge.
3. Attach the right leg (B) to the wood top (A) as shown using four M6 x15L screws (AA). Be sure that the rotating mechanism faces the inside of work table.
Note: Do not overtighten the screws into the wood top to avoid damaging the wood top.

5. Attach the left leg (E) to the wood top (A) using four M6 x 15L screws (AA). Finger tighten only. Be sure that the rotating rod (G) clicks into the leg (E).
E G
AA

AA B
A
Front
4. Attach the rotating rod (G) to the rotating mechanism in the leg (B).
B G

Front

6. Attach the top rail (F) to the wood top (A), leg (B), and leg (E) using eighteen M6 x 15L screws (AA). Do not overtighten the screws.

B AA E
AA

7a. Option 1: Attach the stability bar (H) to the bottom of the
leg (B) and leg (E) using four M8 x 25L bolts (BB) and four M8 washers (CC). Finger tighten only. The support rail can attach in the middle or rear of the legs. Attach it at your desired position. See step 7b for Option 2.

B
E A
Front
Note: Do not turn the rotating rod yet to ensure that the leg remains at its lowest level.
5

ASSEMBLY INSTRUCTIONS

7b. Option 2: Attach the stability bar (H) to the bottom of

the leg (B) and leg (E) using four M8 x 25L bolts (BB) and four M8 washers (CC). Finger tighten only.

Leveling feet installation D

BB CC

B E
B E

8. Square the workbench and then securely tighten all fasteners with a wrench (DD).
Note: Use caution to not overtighten.

10. Attach the drawer side panel (L) to the wood top (A) for two sides as shown by using three screws (AA) for each side.
AA

9. Screw the four leveling feet (D) or casters (I) all the way into the leg assemblies to the maximum depth. Some adjustment may be necessary after the workbench is in the desired location to properly level and use the product.
L

Caster installation
I

A
11. Attach the back panel (M) to the drawer side panels (L) by using two screws (AA) for each side.

AA M
B E

L
6

ASSEMBLY INSTRUCTIONS
12. Attach the front panel (N) to the drawer side panels (L) by using one screw (AA) for each side.

14. Remove the drawers using the steps below
Fully extend and empty the drawer. Depending on the slide, either lift or lower the release lever on both sides so the slides can ride over the stops. Pull out to remove.

AA N

13. Using two or more people, stand the workbench in its upright position.

14. Install the drawers using the steps below
Pull the slides and slide carrier out until fully extended. Hold the slide on the cabinet while aligning it with the slide
on the drawer. Slightly insert one side and repeat for the other side. Slowly push the drawer until it is fully closed to engage the slide. Open the drawer and close it to verify proper operation.

16. Install the crank handle (C) into the shaft in the corner below the wood top as shown.

OPERATION INSTRUCTIONS
1. Leveling Foot Adjustment
Important: Ensure there is no weight on top of the workbench when leveling.
Adjust each leveling foot (D) to the desired elevation with a wrench(DD) as shown.
Turn the lock nut counterclockwise to elevate and clockwise to lower the leveling foot.
2. Height Adjustment
Note: Some minor squeaking is normal when operating the crank. Lubrication is not needed.
Insert the crank handle (C) into the shaft and align it in the hole until it is engaged.
To raise the table, turn the crank handle counterclockwise to the desired height.
To lower the table, turn the crank handle clockwise until it reaches the desired height.
To avoid damage, do not keep turning the crank handle once it has rested at its highest or lowest position.
8

CARE AND MAINTENANCE · Keep the product in good repair by adopting a regular maintenance program. · Grease the casters annually using high quality bearing grease. · Lubricate the slides semi-annually with general purpose grease or equivalent. · Periodically clean the drawer fronts, drawer trim, and other surfaces with a mild detergent and water. · Remove grease and oil with a standard nonflammable cleaning fluid.
Maintaining the Casters
3-YEAR HASSLE-FREE WARRANTY For 3 years from the date of purchase, this product is warranted for the original purchaser to be free from defects in material and workmanship. This guarantee does not cover damage due to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or expendable parts and accessories expected to become unusable after a reasonable period of use. If you think your product meets the above guarantee criteria, please call our customer service department at 888-3KOBALT (888-356-2258), 8 a.m. – 8 p.m., EST, Monday Sunday. You could also contact us at ascs@lowes.com, or return the item to the place of purchase with a copy of the original sales receipt. The distributor will, at its option, repair or replace the product. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.
9

REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 888-3KOBALT (888-356-2258), 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also contact us at ascs@lowes.com.
A

G
L E

PART
A B C D E F G

DESCRIPTION
Wood Top Leg (Right) Crank Handle Leveling Feet Leg (Left) Top Rail Rotating Rod

J K

QUANTITY
1 1 1 4 1 1 1

PART
H I J K L M N

DESCRIPTION
Stability Bar Caster Drawer Slide (Pair) Drawer Drawer Side Panel Back Panel Front Panel

QUANTITY
1 4 2 2 2 1 1

Printed in Cambodia 10

Documents / Resources

KOBALT 6309481 2 Drawer Adjustable Height Workbench Table [pdf] Instruction Manual
6309481, 410-096-0131, 6309481 2 Drawer Adjustable Height Workbench Table, 6309481 Table, 2 Drawer Adjustable Height Workbench Table, 2 Drawer Table, Workbench Table, Adjustable Height Workbench Table, Adjustable Height Table, Workbench, Table, SS23419

References

User Manual

6309481 2 Drawer Adjustable Height Workbench Table

Product Specifications

Product Usage Instructions

Assembly Instructions