Elitech RCW-360 Plus 다목적 실시간 데이터 로거

위에view
This device is a wireless Internet of Things (loT) monitoring product that offers real-time monitoring, alarms, data logging, data uploading, and large screen display for temperature and humidity at monitoring points. When paired with the “Elitech Cold Cloud” cloud platform and app, it enables remote data viewing, historical data queries, remote alarm notifications, and device GPS positioning (only for the 4G version). The product is widely used in industries such as food, pharmaceuticals, catering, and international warehousing logistics. It features an aviation plug for easy sensor replacement. The main unit supports both 4G and Wi-Fi, allowing you to choose between 4G or Wi-Fi communication methods. The main unit comes with dual channels, and the external probes offer several options: single temperature, dual temperature, gel bottle, ultra-low temperature, and temperature and humidity.
특징
- The product is suitable for various occasions, including warehouse, refrigerated storage, refrigerator car, shade cabinet, medicine cabinet, refrigerator lab1 etc;
- 소형 크기, 세련된 외관, 자기 카드 트레이 디자인, 쉬운 설치;
- 컨텐츠가 풍부한 대형 TFT 컬러 스크린 디스플레이;
- 붙박이 재충전용 리튬 건전지는 정전 후에 장시간 실시간 자료 업로드를 가능하게 합니다;
- 붙박이 소리 빛 경보 장치는 국부적으로 경보를 깨달을 수 있습니다;
- GPS 포지셔닝을 통해 장비 위치를 실시간으로 추적할 수 있습니다(4G 버전만 해당).
- Bluetooth 인쇄 기능을 사용하면 현장에서 데이터 인쇄 및 기록이 가능합니다.
- Illumination intensity sensing function enables detection of the door up/dose status to realize automatic screen-on/off;
- 다양한 프로브 유형 사용 가능(자세한 내용은 모델 선택 목록 참조).
인터페이스
4G 버전 
와이파이 버전 
- 모니터링 상태
- 채널 1
- 현재 온도
- 상한선
- 하한 표시
- 채널 2
- 온도 설정을 위한 상한 및 하한 경보 한계
- 습도 설정을 위한 상한 및 하한 경보 한계
- 신호 강도
- 시간과 날짜
- GPS 아이콘

- 전원 상태 아이콘

- 와이파이 아이콘

- The number of local data cache groups that have not yet been uploaded to network 15 Current humidity
- Temperature and humidity display area (actual version shall prevail) 17 Current Light Intensity
온도와 습도가 상한보다 높으면 값이 빨간색으로 표시됩니다. 온도와 습도가 하한보다 낮으면 값이 파란색으로 표시됩니다.

- 감광 센서
- 외부 프로브 1
- 켜기/끄기 버튼
- 마그네틱 카드 트레이
- SIM 카드 인터페이스(4G 버전만 해당)
- "시작 버튼
- 충전 인터페이스
- 충전 표시기
- 알람 상태 표시기
- 내장형 프로브
- 외부 프로브 2
- 화면
- 메뉴” 버튼
- 중지” 버튼
- 외부 프로브 인터페이스
모델 선택 목록
Collection Host: R[W-360 Plus
Tips:The specific host model is subject to the actual product; The host does not come with a probe. Choose a probe according to actual needs, and each channel can be adapted to the following types of probes.
Probe model: the conventional probe models are shown in the table below
| 프로브 유형 | 단일 온도 | 이중 온도 | Ciel bottle temperature | 온도 및 습도 | 초저온 |
| 모델 | T□lX-TE-H | T□lX-TOE-H | T□3X-TE(GLE)-H | HT□3X-THE-H | PT100IIC-TLE-H |
| [able | 5 미터 | 5 미터 | 2 미터 | 5 미터 | 3 미터 |
| 가리키다 | 온도 프로브 1개 | Two temperature probe | 온도 프로브 1개 | 온도 프로브 1개와 습도 프로브 1개 | 온도 프로브 1개 |
| 범위 | -4O°C~B5°C | PT100IIC-TLE-H H:0%RH~100%RH | -2□O°C~15O°C | ||
| 정확성 | ±O.S°C | T:±O.SOC H,±5%RH | ±O.5°C(-4O~B5°C)±1°C(-1□O~15O°C)±2°C(others) | ||
Note: The specific sensor type is subject to the actual product.
기술적 매개변수
- Power Supply: Power adapter: 5V2A (DC), Type-( interface
- Battery: 4000mAh/3.7V rechargeable lithium battery
- Endurance: No less than 20 days (at 25°(, upload interval 5 minutes, good network environment) No less than 7 days (at 25°(, upload interval 5 minutes, GPS positioning, good network environment)
- 포지셔닝 정확도 :
- GPS: . SO meters, positioning interval consistent with recording interval, and not less than 5 minutes
- LBS: Urban areas :S.500 meters, rural areas s3km
- Storage Capacity: 100,000 data sets (cyclic storage)
- Recording Interval: 1 minute to 24 hours, default: normal recording interval 5 minutes, alarm recording interval 2 minutes
- Upload Interval: 1 minute to 24 hours, default: normal upload interval 5 minutes, alarm upload interval 2 minutes
- Local Alarm: Buzzer, LED
- Platform Alarm: Voice, SMS, WeChat, APP, Email
- 방수 등급: IP65
- 0perating Environment: -20~60°C, 0~100%RH (no condensation), below 1km altitude
- Storage Environment: -20~60°(, 0~90%RH
- Product Weight: Main unit approximately 200g
- 제품 크기: 109*69.5*23mm
작동 지침
- 프로브 설치 및 제거(기체 헤드 인터페이스만 해당)
그림과 같이 먼저 항공 플러그를 인터페이스에 정렬하고 삽입한 다음 나사를 시계 방향으로 돌려 프로브를 고정합니다. 분해하려면 나사를 시계 반대 방향으로 돌리고 프로브를 빼냅니다.
- 충전 중
USB 케이블을 통해 전원 어댑터에 연결합니다.
충전 중에는 충전 표시등이 깜박입니다. 완전히 충전되면 충전 표시등이 항상 켜져 있습니다. - 전원 켜기/끄기
전원 켜기/끄기 버튼을 5초 동안 눌러 장치를 켜거나 끕니다.
녹음이 진행 중일 때는 끌 수 없습니다. - 녹음 시작
장비가 모니터링되지 않는 실행 상태에 있을 때 "시작" 버튼을 5초 동안 누르십시오. 팝업 상자에서 "시작" 버튼을 클릭하여 "예"를 클릭한 다음 "메뉴" 버튼을 클릭하여 시작을 확인합니다.
- 녹음 중지
장비가 모니터링된 실행 상태에 있을 때 "정지" 버튼을 5초 동안 누르십시오. 팝업 상자에서 "시작" 버튼을 클릭하여 "예"를 클릭한 다음 "메뉴" 버튼을 클릭하여 정지를 확인합니다.
- 최대, 최소, 평균 View
Click the “Menu” button to enter the maximum, minimum and average display page .
- 메뉴
Press the 11 menu11 button for 3 seconds to enter the main menu page.
The functions of the buttons in the menu are as follows:- “Menu” button: confirm/select
- "시작" 버튼: 전환
- "중지" 버튼: 아래로 전환
View 구성 정보
Including: normal recording interval, alarm recording interval, normal uploading interval, alarm uploading interval, buzzer alarm on/off, GPS positioning on/off, temperature alarm delay, humidity alarm delay and other parameters.

View 장치 정보
Including: device name, GUI□, offline data capacity, IME1,1cc1□.

디스플레이 설정
- Enter the “Display Settings” menu to set bacl<light brightness, backlight time and date format. Brightness: 5 levels of brightness available, and 5 is the brightest.
- 백라이트 시간: 4가지 옵션 사용 가능, 즉 1분, 10분, 30분 및 평상시 켜짐.
- Date format: 3 options available, i.e. yyyy-mm-dd, dd-mm-yyyy, mm-dd- yyyy .

플랫폼 및 작업에 장치를 추가합니다. IV Elitech iCold를 참조하십시오.
엘리트테크 아이콜드
- APP 다운로드 및 설치
Please scan the QR code on the cover of the manual or search Elitech iCold APP Store or Google play to download Elitech App. - 계정 등록 및 APP 로그인
Open the APP, in the login page, as shown in Figure 1, follow the prompts, enter the verification information, and click “Login”. After entering the APP, select “mm
추신:
- If you have not an account, please click on “Register” in the login page, as shown in Figure 2, follow the prompts and enter verification information to complete account registration.
- If you forget the password, click “Forget password” to find password as shown in Figure 3. According to the prompts to finish verfication and find out password.

장치 추가
- 딸깍 하는 소리
오른쪽 상단에 - 딸깍 하는 소리
in the upper right corner, scan the QR code or enter GUI□ back on the device, then fill in the device name and choose time zone. - 클릭 "
“, the device is added.
- Tip: If the device shows off line After being added to the platform, first check the network icon and offline records on the device. If everything is normal, please wait for a few minutes or restart the device before turning it on. The device uploads data according to the set reporting cycle; If the device is offline for a long time, please check if the SIM card is overdue. Ultimately unable to resolve, please call the service hotline for consultation.
- WIFI 유통망
- Press and hold the “Menu” key, briefly to enter the “WIFI Config” page.
- Press the “Menu” key and a Wi-Fi icon
“장치의 왼쪽 상단 모서리에 나타납니다. - Use the app to distribute the network with this device via Wi-Fi, as shown in the following figures 1-3

- 프로브 유형 구성
When using the device for the first time or changing the probe type, it is necessary to reconfigure the probe, as shown in Figure 4 and Figure 5 for operation;
Operation method: Log in to the APP ➔select the device to be changed ➔select “Parameter Configuration” ➔select “User Parameters” ➔select the corresponding probe model based on the actual selected probe type and channel ➔click “SET”.
메모:
- 프로브 유형을 재구성한 후에는 프로브 유형을 장치와 동기화하기 위해 업로드 주기를 기다려야 합니다. 그렇지 않으면 장치를 다시 시작하여 즉시 동기화할 수 있습니다.
- 프로브를 교체하세요. 프로브 교체 시점과 구성 시점 사이의 시간 차이로 인해 데이터 목록에 잘못된 데이터가 표시될 수 있습니다.
장치 관리
- After the device has started recording and added to the platform, wait for the data to be uploaded, then display online. Start recording reference 111-3.
- If you want to make other configurations for the device, please enter the device information page, such as historical data, temperature unit, upper and lower alarm limits, upload record interval, etc. As shown in Figure 7 9 .
Note: After the device temperature unit is changed, it needs to be changed under user settings(More-Setting).

Elitech iCold 플랫폼
For more functions, please log in Elitech icold Platform: new.i-elitech.com.
충전하기
장치가 Elitech 플랫폼에 처음 등록되면 무료 데이터 및 고급 플랫폼 서비스가 활성화됩니다. 유예기간 이후에는 사용설명서를 참조하여 충전을 하셔야 합니다.
문서 / 리소스
![]() |
Elitech RCW-360 Plus 다목적 실시간 데이터 로거 [PDF 파일] 사용자 매뉴얼 RCW-360Plus-WG, RCW-360 Plus 다목적 실시간 데이터 로거, 다목적 실시간 데이터 로거, 실시간 데이터 로거, 시간 데이터 로거, 데이터 로거 |

