DrayTek SysLog Setup
명세서
- Product Name: Vigor Router
- Utility: Syslog
- Default Destination Port: 514
SysLog Setup
Syslog is a widely used utility in the Unix world for monitoring router activity. By running a Syslog Daemon, you can capture activity output from the router on either a local PC or a remote one elsewhere on the Internet.
소개
Syslog is a popular utility in the Unix world. For monitoring router activity, you can run a Syslog Daemon, which will capture the activity output from the router. This Daemon program can run on a local PC or a remote one elsewhere on the Internet.
구성
- Check the Enable box to enable syslog service.
- Server IP Address: The IP address to which syslog messages can be sent.
- Destination Port: The UDP port number on which the syslog server is listening. The default value is 514.
Your Vigor router sends many types of syslog messages. Some examples of the syslog messages with their message format are shown next:
Syslog Message Examp레
Example of User Access log message:
Example of WAN log message while using an ISDN connection:
Example of VPN (IPSec) log message while the VPN/IPSec tunnel is being used:
자주 묻는 질문
Q: What types of syslog messages does the Vigor router send?
A: The Vigor router sends various types of syslog messages including User Access log messages, WAN log messages during ISDN connection, and VPN (IPSec) log messages during VPN/IPSec tunnel usage.
문서 / 리소스
 |
DrayTek SysLog Setup [PDF 파일] 사용 설명서 SysLog Setup |