Dripex Elliptical Exercise Machine User Manual

1. 안전 정보

Please read this manual carefully before assembling and using the Dripex Elliptical Exercise Machine. Retain this manual for future reference.

• 운동 프로그램을 시작하기 전에 의사와 상담하십시오.
• 작동 중에는 어린이와 애완동물을 기계 가까이에 두지 마십시오.
• 기기를 주변에 충분한 공간을 확보한 평평하고 안정적인 표면에 놓으십시오.
• 사용하기 전에 기계의 부품이 헐거워지거나 손상되었는지 점검하십시오. 부품이 손상된 경우 사용하지 마십시오.
• 적절한 운동복과 신발을 착용하세요.
• 최대 중량 용량은 265파운드(120kg)를 초과하지 마십시오.
• 실신, 현기증, 통증을 느끼면 즉시 운동을 중단하세요.

2. 패키지 내용

조립을 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

• 1x Dripex Elliptical Machine
• 1x 하드웨어 팩
• 1x 사용자 설명서

3. 설치 및 조립

Follow these steps to assemble your Dripex Elliptical Exercise Machine. An assembly video is provided for visual guidance.

조립 비디오 가이드

단계별 조립

1. Install the Rear Foot Tube: Attach the rear foot tube to the main frame using the provided bolts and wrench. Ensure all screws are tightened securely.
2. Install the Front Foot Tube: Attach the front foot tube to the main frame. This tube includes transportation wheels for easy movement. Ensure all screws are tightened securely.
3. Install the Resistance Cable and Center Bar: Before installing, turn the resistance knob to level 8 to extend the resistance cable fully. Connect the sensor cables and then firmly connect the resistance cable with the lower cable. Pull the resistance cable up and hang it on the hole of the metal bracket. Insert the center bar and secure it with the provided hardware.
4. Install the Digital Monitor: Unscrew the four M5x10 pan head screws from the back of the LCD monitor. Connect the sensor cables from the main frame to the corresponding ports on the monitor. Mount the monitor onto the bracket and secure it with the screws.
5. Install the Heart Rate Grip: Attach the heart rate grip handlebars to the main upright post using the provided bolts and tighten them. Connect the heart rate sensor cables.
6. Install the Left & Right Swing Arm: The arc spacers are pre-attached on the swing shaft of the center bar. Attach the left and right swing arms to the main frame, ensuring the arc spacers are correctly positioned. Secure with the provided hardware.
7. Install the Left & Right Pedal Shaft: The right pedal hinge bolt is screwed into the right crank in a clockwise direction, and its nylon nut is tightened in a counterclockwise direction. The left pedal hinge bolt is screwed into the left crank in a counterclockwise direction, and its nylon nut is tightened in a clockwise direction.
8. Install the Left & Right Pedal: Attach the left and right pedals to their respective pedal shafts using the provided screws and washers. Ensure they are securely fastened.
9. Install the Left & Right Handlebar: Attach the left and right handlebars to the swing arms. Secure them with the provided bolts and tighten all connections.
10. Install the Nut Cover & Bottle Holder: Place the nut covers over exposed nuts for safety and aesthetics. Install the bottle holder on the main frame using the provided screws.

4. 사용 설명서

저항 조정

The Dripex Elliptical Machine features an 8-level adjustable magnetic resistance system. Turn the tension knob located on the main frame to increase or decrease the workout intensity. Levels 1-3 are for casual mode, 4-6 for strength training, and 7-8 for body-built mode.

Image: Close-up of the 8-level adjustable magnetic resistance control knob.

LCD 모니터 사용

The integrated LCD digital monitor tracks your exercise data in real-time. It displays time, speed, distance, calories burned, pulse, and odometer readings. Use the 'MODE', 'RESET', and 'SET' buttons to navigate and customize your workout routine.

Image: The LCD monitor displaying workout data, with pulse sensors on the handlebars and a device holder.

펄스 센서

Grip the fixed heart rate sensors on the handlebars to monitor your heart rate during your workout. The pulse reading will be displayed on the LCD monitor.

장치 홀더

Utilize the integrated device holder to place your tablet or smartphone, allowing you to enjoy music or videos while exercising.

교통 바퀴

To move the elliptical machine, simply tilt it forward onto its transportation wheels and roll it to your desired location. This feature makes it easy to store when not in use.

Image: A person demonstrating how to move the elliptical machine using its built-in transportation wheels.

제품 시연 영상

5. 유지관리

Regular maintenance ensures the longevity and optimal performance of your elliptical machine:

• 청소: 광고로 기계를 닦으세요amp 사용 후에는 천으로 닦아 땀과 먼지를 제거하세요. 연마성 세제는 사용하지 마세요.
• 점검: 주기적으로 모든 볼트, 너트 및 움직이는 부품의 조임 상태를 점검하십시오. 느슨한 패스너는 조이십시오.
• 매끄럽게 하기: Apply a small amount of silicone-based lubricant to moving joints if any squeaking occurs.
• 저장: 기기를 직사광선과 극한 온도 변화를 피해 건조하고 서늘한 곳에 보관하십시오.

6. 문제 해결

If you encounter issues with your Dripex Elliptical Machine, refer to the following common solutions:

• Machine is stiff or difficult to pedal: Ensure the resistance cable was installed correctly and the resistance knob is not set to an excessively high level. Refer to assembly step 3.
• 삐걱거리는 소리: Check all connections for tightness and apply lubricant to moving joints if necessary.
• LCD monitor not displaying data: Check the battery in the monitor and ensure all sensor cables are securely connected.
• 사용 중 불안정함: Ensure the machine is placed on a level surface. Adjust the leveling caps on the foot tubes if needed.

추가적인 도움이 필요하시면 고객 서비스 센터로 문의해 주십시오.

7. 사양

8. 보증 및 지원

The Dripex Elliptical Exercise Machine comes with a 1-year warranty. For any concerns, questions, or support needs, please contact Dripex customer service. We are committed to providing high-quality elliptical machines and satisfied customer service.