SONOFF Orb 4-in-1 Zigbee Smart Scene Button (SNZB-01M) User Manual

소개

The SONOFF Orb 4-in-1 Zigbee Smart Scene Button (SNZB-01M) is a versatile wireless controller designed to enhance your smart home experience. It features four distinct buttons, each supporting multiple actions (single-press, double-press, triple-press, and long-press), providing up to 16 different scene triggers for controlling lights, routines, and various home automation tasks.

Its innovative split magnetic design allows it to function as a fixed wall switch or a portable handheld remote. The device supports dual protocols (Zigbee and eWeLink-Remote) for broad compatibility with smart home ecosystems, including popular open-source platforms like Home Assistant and Zigbee2MQTT. With TouchLink and Home Assistant Bindings, it offers fast and stable local control, minimizing cloud delays for reliable performance. The wire-free design ensures easy installation anywhere using magnets, adhesive, or screws.

1. 설정

1.1 언박싱

Carefully unbox your SONOFF Orb 4-in-1 Zigbee Smart Scene Button. The package typically includes the button, a magnetic base, adhesive, and screws for installation.

그림 1.1: The SONOFF Orb 4-in-1 Zigbee Smart Scene Button (SNZB-01M) held in hand, showing its four distinct button quadrants.

1.2 설치

The SNZB-01M offers flexible, wire-free installation options. It can be mounted using the included magnetic base, adhesive, or screws. The magnetic design allows the button to be detached from its base for use as a portable remote.

• 마그네틱 마운팅: Attach the magnetic base to a metallic surface or use the adhesive to fix it to a wall. The button can then be magnetically attached to the base.
• 접착 장착: Use the provided adhesive pad to secure the magnetic base to any clean, flat surface.
• 나사 장착: For a more permanent installation, use the included screws to fix the magnetic base to a wall.

그림 1.2: 위에view of the SNZB-01M's features, including its magnetic split design for flexible placement and various trigger actions.

그림 1.3: Examples of flexible placement for the SONOFF Orb button, including on a nightstand, coffee table, and refrigerator.

1.3 페어링 및 연결

The SNZB-01M supports both Zigbee and eWeLink-Remote protocols. A switch on the device allows you to select the desired mode for pairing with your smart home gateway.

그림 1.4: The dual-protocol switchable feature of the SNZB-01M, allowing integration with both eWeLink-Remote and Zigbee gateways.

장치를 페어링하려면:

1. Select the desired protocol (Zigbee or eWeLink-Remote) using the switch on the back of the device.
2. Put your compatible smart home gateway into pairing mode.
3. Press the pairing button on the SNZB-01M (often indicated by three dots) for a few seconds until the indicator light confirms pairing mode.
4. Confirm successful pairing through your gateway's application or interface.

The SNZB-01M is compatible with various platforms, including Home Assistant and Zigbee2MQTT, often requiring a SONOFF Zigbee gateway or similar open-source dongle for full functionality.

그림 1.5: The SNZB-01M's compatibility with open-source platforms, demonstrating integration with Home Assistant and Zigbee2MQTT via SONOFF Dongle Series.

그림 1.6: Detailed compatibility table for the SNZB-01M, outlining supported platforms, required gateways, and available trigger actions for each.

2. 장치 작동

2.1 장면 제어

The SONOFF Orb 4-in-1 button provides 16 possible scene triggers through its four quadrants. Each quadrant supports single-tap, double-tap, triple-tap, and long-press actions. These actions can be configured within your smart home platform to activate specific scenes or control individual devices.

Examples of scene control:

• 단일 탭: Turn on/off a specific light.
• 두 번 탭: Activate a "Movie Mode" scene (dim lights, close blinds).
• 세 번 탭: Trigger a "Good Night" routine (turn off all lights, lock doors).
• 길게 누르기: Adjust brightness of a light or open/close curtains gradually.

그림 2.1: Visual representation of controlling lights and curtains with the SNZB-01M button.

2.2 TouchLink Functionality

The SNZB-01M supports TouchLink, simplifying the direct pairing and control of compatible smart bulbs without needing a central hub or gateway for basic functions. This allows for faster, more reliable responses.

To use TouchLink:

1. Ensure the smart bulb is powered on and in pairing mode (refer to the bulb's manual).
2. Hold the Orb 4-in-1 button close to the smart bulb (within 10 cm).
3. Press and hold one of the button quadrants on the Orb until the bulb responds (e.g., flashes or changes brightness), indicating successful pairing.

Note: TouchLink support varies by brand and model of the smart bulb. Refer to the specifications of your bulb for accurate information.

그림 2.2: How to use TouchLink for simple pairing and direct control of smart bulbs with the SNZB-01M.

3. 유지관리

3.1 배터리 교체

The SONOFF Orb 4-in-1 button is powered by a CR2477 Lithium Metal battery. When the battery level is low, the device's indicator may signal this, or you may notice reduced responsiveness. To replace the battery:

1. Gently twist or pry open the back cover of the button to access the battery compartment.
2. 기존 CR2477 배터리를 제거하세요.
3. 새로운 CR2477 리튬 금속 배터리를 삽입할 때 극성을 확인하십시오.
4. 뒷면 커버를 단단히 닫으세요.

사용한 배터리는 현지 규정에 따라 책임감 있게 폐기하십시오.

3.2 청소

To clean the device, use a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or internal components. Ensure the device is dry before use.

4. 문제 해결

4.1 장치가 응답하지 않음

• 배터리 확인: Ensure the battery is not depleted. Replace the CR2477 battery if necessary.
• 연결 확인: Verify that the device is properly paired with your Zigbee or eWeLink-Remote gateway. If not, attempt to re-pair the device.
• 범위: Ensure the device is within the effective range of your gateway or a strong Zigbee mesh network.
• 간섭: 다른 무선 기기와의 잠재적인 간섭을 최소화하십시오.

4.2 Issues with Home Assistant (ZHA)

If you are using the SONOFF Orb 4-in-1 with Home Assistant via ZHA and experience issues with all 16 trigger combinations being recognized, it may require a specific ZHA script or "quirks file".

• ZHA Script Requirement: As of early 2026, using the Orb 4-in-1 with ZHA may require downloading and installing a specific ZHA script. Refer to the official SONOFF Help Center or community forums for detailed instructions and the necessary files.
• Event Recognition: Without the correct script, some button actions (e.g., button 2, 3, 4 actions beyond single press) might only register as generic "step" or "stop" events instead of distinct triggers.

4.3 eWeLink Mode Pairing Difficulties

Some users may encounter difficulties pairing the device in eWeLink mode. If the device briefly appears in the eWeLink app during pairing but then disappears, ensure:

• The device is correctly switched to eWeLink mode.
• The eWeLink gateway is in pairing mode and functioning correctly.
• You are pressing the correct pairing button (button 3, often marked with three dots) on the Orb.

If issues persist in eWeLink mode, consider trying Zigbee mode if your setup allows, as it has been reported to be more straightforward for some users.

5. 사양

그림 5.1: Detailed technical specifications for the SONOFF Orb 4-in-1 Zigbee Smart Scene Button (SNZB-01M).

6. 보증 정보

The SONOFF Orb 4-in-1 Zigbee Smart Scene Button (SNZB-01M) comes with a 2년 보증 구매일로부터. 본 보증은 정상적인 사용 중 발생한 제조상의 결함 및 고장에 적용됩니다. 보증 청구를 위해 구매 증빙 자료를 보관해 주십시오.

For detailed warranty terms and conditions, please refer to the official SONOFF web사이트를 방문하거나 고객 지원팀에 문의하세요.

그림 6.1: Two-year warranty information.

7. 고객 지원

If you require assistance with your SONOFF Orb 4-in-1 Zigbee Smart Scene Button, please contact our customer support team:

• 이메일: support@itead.cc
• 온라인 도움말 센터: SONOFF 공식 웹사이트를 방문하세요. website for FAQs, troubleshooting guides, and additional resources.

그림 7.1: 고객 지원 연락처 정보입니다.