Anern 3200W 24V 하이브리드 태양광 인버터(80A MPPT 충전 컨트롤러 포함) 사용 설명서

1. 서론

This manual provides essential instructions for the installation, operation, and maintenance of your Anern AN-SCI-ECO 3200W 24V Hybrid Solar Inverter. This device is an integrated solution featuring a pure sine wave inverter, an 80A MPPT solar charge controller, and a battery charger, designed for off-grid photovoltaic systems. It is compatible with 24V lead-acid, gel, and lithium batteries, offering flexible power management for various applications.

Please read this manual thoroughly before installation and use to ensure proper operation and safety.

2. 안전 지침

Observe the following safety precautions to prevent injury and damage to the inverter:

• 설치는 모든 지역 전기 규정에 따라 자격을 갖춘 인원이 수행해야 합니다.
• Do not attempt to disassemble or repair the inverter yourself. Refer all servicing to authorized service personnel.
• 인버터의 접지가 적절히 되어 있는지 확인하세요.
• 인버터를 비, 눈, 물보라 또는 기타 액체에 노출시키지 마십시오.
• Do not operate the inverter if it has been physically damaged or if any cables are frayed or damaged.
• 과열을 방지하기 위해 인버터 주변에 적절한 환기가 이루어지도록 하세요.
• 유지보수 또는 배선 작업을 하기 전에 항상 모든 전원(태양광 패널, 배터리, AC 입력)을 차단하십시오.

3. 제품 오버view

The Anern AN-SCI-ECO 3200W 24V Hybrid Solar Inverter combines multiple functions into one compact unit, providing a reliable power solution for your off-grid needs.

주요 특징:

• 통합 디자인: Combines a 3200W pure sine wave inverter, an 80A MPPT solar charge controller, and a battery charger.
• 고효율 MPPT: Maximizes solar power harvesting with up to 95% conversion efficiency.
• 배터리 호환성: Supports 24V lithium, lead-acid, and gel batteries, with activation function for lithium batteries.
• Configurable LCD Display: User-friendly interface for monitoring and setting parameters such as charging current, AC/solar charger priority, and input voltag전자 범위.
• 종합 보호: Equipped with multiple safeguards against overheating, overcurrent, overvoltag전자, 언더볼tage, short circuit, and overload.

그림 3.1: 전면 view of the Anern 3200W 24V Hybrid Solar Inverter, showing the integrated LCD display and control buttons.

Figure 3.2: Diagram illustrating the 'All-in-One' concept, combining an MPPT charge controller, AC battery charger, and power inverter into a single unit.

보호 기능:

The inverter incorporates robust protection mechanisms to ensure safe and reliable operation:

• 단락 보호: 단락으로 인한 손상을 방지합니다.
• 과부하 보호: 과도한 전력 소모를 방지하는 안전 장치.
• 과전류 보호: Protects components from high current.
• 오버볼tage 보호: Prevents damage from input voltag전자 스파이크.
• 언더볼tage 보호: Ensures stable operation by preventing low voltag조건.
• 과열 보호: Shuts down the unit if internal temperatures become too high.

Figure 3.3: Visual representation of the comprehensive 360-degree protection features, including safeguards against short circuit, overload, overcurrent, overvoltag전자, 언더볼tage, 그리고 과열.

4. 설정

Careful installation is crucial for the performance and longevity of your hybrid inverter. Follow these general guidelines:

4.1 사이트 선택:

• Install the inverter indoors in a clean, dry, and well-ventilated area.
• 주변 온도가 권장 작동 범위 내에 있는지 확인하십시오.
• Mount the inverter vertically on a non-flammable surface, allowing sufficient clearance for airflow around the unit.

4.2 배선 연결:

All wiring should be done with appropriate gauge cables and connectors, following local electrical codes.

1. 배터리 연결: Connect the 24V battery bank to the inverter's battery terminals. Ensure correct polarity (positive to positive, negative to negative).
2. PV 어레이 연결: Connect the solar panel array to the PV input terminals. Verify that the PV open circuit voltage는 400V DC를 초과하지 않습니다.
3. AC 입력 연결: Connect the utility grid (if applicable) to the AC input terminals.
4. AC 출력 연결: Connect your loads (appliances) to the AC output terminals.
5. 접지: 인버터 섀시가 제대로 접지되었는지 확인하십시오.

Figure 4.1: Connection diagram illustrating how solar collectors, utility grid, battery, and household appliances connect to the hybrid inverter for power management.

5. 운영

Once installed, the inverter can be configured and operated via its LCD display and control buttons.

5.1 초기 전원 켜기:

1. 모든 연결이 안전하고 올바른지 확인하세요.
2. 배터리 차단기를 켜세요.
3. PV 어레이 차단기를 켭니다.
4. Turn on the AC input breaker (if connected to utility).
5. 인버터의 전원 버튼을 눌러 전원을 켜세요.

5.2 LCD Display and Settings:

The LCD display provides real-time status and allows configuration of various operating parameters. Refer to the detailed instructions in the full product manual for specific menu navigation and parameter adjustments.

5.3가지 충전 모드:

The inverter supports multiple charging priority modes to optimize energy usage:

• 태양광 우선 순위: Solar power is the primary source for charging batteries and powering loads. Utility power is used only when solar power is insufficient.
• Solar + Utility: Both solar and utility power are used simultaneously to charge batteries and power loads.
• 태양광 전용: Only solar power is used for charging. Utility power is not used for charging.

5.4 출력 모드:

The inverter can be configured to prioritize different power sources for output:

• Solar Priority, then Battery, then Utility: Loads are powered first by solar, then by battery, and finally by the utility grid if both solar and battery are insufficient.
• Solar Priority, then Utility, then Battery: Loads are powered first by solar, then by the utility grid, and finally by the battery if both solar and utility are unavailable.

Figure 5.1: Diagram detailing the three possible charging modes (Solar Priority, Solar+Utility, Solar Only) and two output modes (Solar then Battery then Utility, or Solar then Utility then Battery).

6. 유지관리

정기적인 유지보수는 최적의 성능을 보장하고 인버터의 수명을 연장합니다.

• 청소: Periodically clean the inverter's exterior with a dry cloth. Ensure ventilation openings are free from dust and debris.
• 연결 확인: 매년 모든 전기 연결부(태양광 패널, 배터리, 교류 입력/출력)의 누전 여부와 부식 여부를 점검하십시오.
• 배터리 상태: 배터리 용량 모니터링tag배터리 제조업체의 권장 사항에 따라 전자기기 및 건강 관련 정보를 확인하십시오.
• 환경 점검: Ensure the installation environment remains dry, well-ventilated, and within the specified temperature range.

7. 문제 해결

인버터 사용 중 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오. 복잡한 문제는 기술 지원팀에 문의하십시오.

일반적인 문제:

• 전원 출력 없음: Check battery connections, PV input, AC input, and ensure the inverter is turned on. Verify that no protection features (e.g., undervoltage, overload) have been triggered.
• 배터리가 충전되지 않음: 태양광 어레이 연결 상태와 볼륨을 확인하십시오.tage. Ensure solar panels are receiving adequate sunlight. Verify charging settings on the LCD display.
• 과부하 경고: Reduce the connected load. The inverter will automatically attempt to restart after an overload condition.
• Overtemperature Warning: Ensure adequate ventilation around the inverter. Clear any obstructions from cooling vents. Allow the unit to cool down.
• 오류 코드: Refer to the full product manual for a list of specific fault codes displayed on the LCD and their corresponding troubleshooting steps.

8. 사양

Detailed technical specifications for the Anern AN-SCI-ECO 3200W 24V Hybrid Solar Inverter:

9. 보증 및 지원

Specific warranty details are not provided in this document. For warranty information, technical support, or service inquiries, please contact Anern customer service or your authorized dealer. Keep your purchase receipt as proof of purchase.