1. 안전 정보
중요 안전 지침: Read and understand all instructions before operating the snow thrower. Failure to follow these instructions may result in electric shock, fire, and/or serious personal injury.
- Always wear appropriate protective gear, including gloves and eye protection.
- Keep hands and other body parts away from rotating parts.
- 밀폐된 공간이나 인화성 물질 근처에서 제설기를 작동하지 마십시오.
- Always unplug the snow thrower before performing any maintenance or cleaning.
- 작업 시작 전에 작업 구역에 잔해물이나 장애물이 없는지 확인하십시오.
- Do not allow children or untrained persons to operate the snow thrower.
2. 제품 특징
The Greenworks 40V 20-inch Snow Thrower is designed for efficient snow removal with user convenience in mind. Key features include:
- Effortless Snow Clearing: Powered by G-MAX 40V lithium-ion technology for convenient snow removal.
- 향상된 성능: Brushless motor delivers increased torque, efficiency, and overall performance.
- Wide Clearing Path: 20-inch clearing path and 8-inch clearing depth to efficiently tackle snow-covered areas.
- Dual LED Headlights: For improved visibility during early morning or late evening operation.
- 180° Rotating Chute: Allows for adjustable snow discharge direction.
- 접이식 손잡이: For compact storage and easy transport.
그림 1: 이상view of the Greenworks 40V 20-inch Snow Thrower highlighting its main features.
Figure 2: The snow thrower in action, demonstrating its efficient snow removal capability.
Figure 3: Dual LED headlights provide visibility for clearing snow in low-light conditions.
Figure 4: The brushless motor provides increased power and efficiency for demanding tasks.
3. 설치 및 조립
Before first use, some assembly is required. Follow these steps to prepare your snow thrower for operation:
- 구성 요소 풀기: 모든 부품을 포장에서 조심스럽게 꺼내세요. 포장 목록에 있는 모든 구성품이 있는지 확인하세요.
- 핸들 어셈블리: Attach the upper handle to the lower handle using the provided knobs and bolts. Ensure the cables are not pinched.
- 슈트 조립: Secure the discharge chute to the snow thrower body. Ensure it rotates freely and locks into position.
- 배터리 설치: Insert the fully charged 40V 5Ah battery into the battery compartment until it clicks into place.
Figure 5: The battery compartment, designed for easy insertion and removal of the 40V battery.
4. 사용 설명서
Follow these steps for safe and effective snow removal:
- 사전 작업 확인: Before each use, inspect the snow thrower for any loose parts, damage, or obstructions. Ensure the battery is fully charged.
- Starting the Snow Thrower: Press and hold the safety button, then pull the bail switch lever towards the handle. The auger will begin to rotate.
- 제설 작업: Push the snow thrower forward at a comfortable pace. Do not force the unit through heavy snow. For deep snow, clear in smaller passes.
- Adjusting Discharge Chute: Use the chute crank to change the direction of snow discharge. The chute can rotate 180 degrees.
- Stopping the Snow Thrower: Release the bail switch lever to stop the auger.
Figure 6: The 180° rotating chute allows for precise control over snow discharge direction.
Figure 7: The ergonomic handle and simple controls ensure effortless starting and operation.
5. 유지관리
Regular maintenance ensures optimal performance and extends the life of your snow thrower. Always disconnect the battery before performing any maintenance.
- 청소: After each use, remove any snow, ice, or debris from the auger housing, chute, and exterior surfaces. Use a damp 청소용 천.
- 오거 점검: Periodically check the auger blades for wear or damage. Replace worn blades to maintain clearing efficiency.
- 스키드 슈즈와 스크레이퍼 바: Inspect the skid shoes and scraper bar for wear. Adjust or replace them as needed to prevent damage to the unit and the surface being cleared.
- 저장: Store the snow thrower in a dry, protected area. The folding handles allow for compact storage. Remove the battery during long-term storage.
6. 문제 해결
If you encounter issues with your snow thrower, refer to the following common problems and solutions:
- 장치가 시작되지 않습니다:
- 배터리가 완전히 충전되어 있고 제대로 삽입되었는지 확인하세요.
- Check that the safety button is pressed before pulling the bail switch.
- Inspect for any obstructions in the auger or chute.
- Snow Discharge is Weak or Clogged:
- Clear any clogs from the discharge chute or auger housing (ensure battery is removed first).
- Reduce the forward speed when clearing heavy or wet snow.
- Ensure the auger blades are not excessively worn.
- 배터리 사용 시간 감소:
- 사용하기 전에 배터리가 완전히 충전되어 있는지 확인하세요.
- 매우 낮은 온도에서 작동하면 배터리 성능이 저하될 수 있습니다.
- Heavy snow conditions require more power, leading to shorter runtimes.
7. 사양
| 상표 | 그린웍스 |
| 모델 번호 | SN40L510-00 |
| 전원 | DC(배터리) |
| 권tage | 40 볼트 |
| 엔진 유형 | Electric (Brushless) |
| 클리어링 폭 | 20인치 |
| 이상적인 눈 깊이 | 20 센티미터(약 8인치) |
| 제품 치수 | 42.13인치 깊이 x 20.87인치 너비 x 41.73인치 높이 |
| 품목 무게 | 59.9파운드 |
| 배터리 | 1개의 리튬 이온 배터리 필요(포함) |
| 제조업체 | Sunrise Global Marketing, LLC |
8. 보증 및 지원
Greenworks provides comprehensive support for its products.
- 보증: This product typically comes with a manufacturer's warranty. Please refer to your product packaging or the official Greenworks web구체적인 보증 약관은 해당 사이트에서 확인하세요.
- 보호 계획: Additional protection plans may be available for purchase to extend coverage beyond the standard warranty. Examp해당 상품에는 2년 및 3년 보장 플랜이 포함됩니다.
- 고객 지원: 기술 지원, 부품 또는 서비스에 대해서는 다음을 방문하십시오. 그린웍스 스토어 또는 고객 서비스에 직접 문의하세요.
