소개
The KZ Vader Pro In-Ear Monitors (IEMs) are designed for high-fidelity audio reproduction, featuring a triple dynamic driver configuration and customizable sound profiles via 4 tuning switches. These monitors are suitable for various applications, including gaming, stage monitoring, and studio use, providing clear and detailed sound across a wide frequency range.
This manual provides instructions for the proper setup, operation, and maintenance of your KZ Vader Pro IEMs to ensure optimal performance and longevity.
패키지 내용
계속하기 전에 패키지에 모든 품목이 들어 있는지 확인하세요.
- KZ Vader Pro In-Ear Monitors (Left and Right earpieces)
- 분리형 오디오 케이블
- 이어쿠션(다양한 사이즈)
- 사용 설명서 (본 문서)
설정
1. 케이블 연결
The KZ Vader Pro IEMs feature a detachable cable for convenience and durability. Each earpiece has a 2-pin connector. Ensure the cable connectors are aligned with the earpiece sockets. Gently push the cable connectors into the earpiece sockets until they are securely seated. The cable is designed to loop over the ear for a secure fit.
Image: KZ Vader Pro In-Ear Monitors with the detachable cable connected, showing the over-ear design.
2. 이어팁 선택 및 설치
Proper ear tip selection is crucial for sound quality and comfort. Experiment with the included ear tips (silicone and memory foam) to find the size that provides a snug fit and good seal in your ear canal. A good seal ensures optimal bass response and noise isolation.
- Gently remove the pre-installed ear tips from the earpieces.
- Select a pair of ear tips that feel comfortable and create a good seal.
- Carefully push the new ear tips onto the nozzle of the earpiece until they are securely attached.
3. 이어폰 착용
Insert the earpieces into your ear canals. Guide the cable over the top of your ears, ensuring it sits comfortably. The over-ear design helps to keep the IEMs secure during movement and reduces microphonics (cable noise).
Connect the 3.5mm jack of the cable to your audio source (e.g., smartphone, computer, audio interface).
Operating the Tuning Switches
The KZ Vader Pro features 4-level tuning switches on each earpiece, allowing you to customize the sound profile. These switches are located on the side of each IEM. Use a small tool (like a SIM ejector tool or a toothpick) to adjust the switches.
이미지: 클로즈업 view of the four tuning switches on the side of a KZ Vader Pro earpiece, labeled 1 to 4, with an 'ON' position indicator.
Each switch corresponds to a specific frequency adjustment:
| 스위치 | Effect (When ON) |
|---|---|
| 스위치 1 | Low frequency (bass) increased by 1dB |
| 스위치 1 & 2 | Low frequency (bass) increased by 2dB |
| 스위치 3 | Mid-high frequency increased by 1dB |
| 스위치 3 & 4 | Mid-high frequency increased by 2dB |
| All Switches ON | Overall frequency enhancement |
Experiment with different switch combinations to find your preferred sound signature. Remember to adjust both earpieces identically for balanced stereo sound.
유지
- 청소: Regularly clean the earpieces and ear tips. Use a soft, dry cloth to wipe the exterior of the IEMs. For ear tips, remove them and clean with mild soap and water, then rinse thoroughly and allow to dry completely before reattaching.
- 케이블 관리: Avoid sharp bends or excessive pulling on the cable. When storing, coil the cable loosely.
- 저장: Store your IEMs in a protective case when not in use to prevent damage from dust, moisture, and physical impact.
- 습기를 피하세요: Do not expose the IEMs to excessive moisture or liquids. If they become wet, disconnect them immediately and allow them to dry completely before use.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 소리가 나지 않거나 간헐적으로 소리가 납니다. | Loose cable connection, incorrect audio source settings, damaged cable. | Ensure the cable is securely connected to both the IEMs and the audio source. Check audio settings on your device. Try a different audio source or cable if available. |
| 음질이 좋지 않음 (저음 부족, 먹먹한 소리) | Improper ear tip seal, ear tips clogged with earwax. | Experiment with different ear tip sizes to achieve a proper seal. Clean ear tips and earpiece nozzles. |
| Unbalanced sound (one side louder/softer) | Tuning switches set differently on each earpiece, earwax blockage in one earpiece. | Verify that the tuning switches on both earpieces are set identically. Clean both earpieces and ear tips thoroughly. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델명 | Vader Pro |
| 상표 | KZ |
| 오디오 드라이버 유형 | Triple Dynamic Driver |
| 소음 제어 | 소리 차단 |
| 주파수 응답 | 5Hz - 45kHz |
| 감광도 | 116데시벨 |
| 임피던스 | 19옴 |
| 헤드폰 잭 | 3.5 mm 잭 |
| 연결 기술 | 열광한 |
| 케이블 기능 | 분리 가능 |
| 특징 | 4-Level Switch for Tuning, Noise Isolation, Detachable Cable |
| 품목 무게 | 0.07킬로그램(약 2.39온스) |
| 귀 위치 | 귀에 |
| 호환 장치 | Computers, Gaming Consoles, Telephones, Music Production Equipment |
보증 및 지원
보증 정보 및 기술 지원에 대해서는 KZ 공식 웹사이트를 참조하십시오. web해당 웹사이트를 방문하거나 판매점에 문의하십시오. 구체적인 보증 조건은 지역 및 구매처에 따라 다를 수 있습니다.
이 설명서에 포함하기 위해 판매자의 공식 제품 비디오는 제품 데이터에 제공되지 않았습니다.