1. 서론
Welcome to the comprehensive user manual for your Anern 12.8V 200Ah LiFePO4 Lithium Battery. This document provides essential information regarding the safe handling, installation, operation, and maintenance of your battery. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
This battery is specifically designed for energy storage applications, including residential solar systems, recreational vehicle (RV) and marine power, and various off-grid installations. Its advanced LiFePO4 chemistry offers superior safety, efficiency, and a long cycle life.
2. 안전 정보
경고: 이 안전 지침을 따르지 않을 경우 화재, 감전, 부상 또는 배터리 및 기타 재산 피해가 발생할 수 있습니다.
- Always wear appropriate personal protective equipment (PPE), such as safety glasses and insulated gloves, when handling batteries.
- 배터리 단자를 단락시키지 마십시오. 배터리가 심각하게 손상될 수 있으며 화재의 위험이 있습니다.
- 배터리를 화기, 과도한 열 또는 장시간 직사광선에 노출시키지 마십시오.
- 배터리를 물이나 다른 액체에 담그지 마십시오.
- 배터리를 어린이와 애완동물의 손이 닿지 않는 곳에 보관하세요.
- 배터리를 충전하거나 방전할 때는 적절한 환기가 이루어지도록 하십시오.
- This 12.8V 200Ah lithium battery is designed for energy storage applications (e.g., solar systems, RV power, backup energy solutions). It is 추천하지 않음 for use as a starter battery for vehicles or high-cranking power equipment.
- 배터리를 열거나 분해하거나 개조하지 마십시오. 내부에는 사용자가 수리할 수 있는 부품이 없습니다.
- In case of battery leakage, contact with skin or eyes, flush immediately with plenty of water and seek medical attention.
3. 제품 특징
The Anern 12.8V 200Ah LiFePO4 Lithium Battery incorporates advanced technology to provide reliable and long-lasting power.
- Eco-Friendly & Safe LiFePO4 Chemistry: Utilizes lithium iron phosphate, eliminating toxic lead/acid components and offering superior thermal stability for a safe, environmentally responsible power solution.
- 연장된 사이클 수명: Engineered for maximum durability, delivering over 15,000 charge cycles, significantly outperforming traditional lead-acid batteries. This ensures decades of maintenance-free power with minimal capacity degradation.
- Integrated 200A Battery Management System (BMS): An advanced BMS provides comprehensive safeguards, including instant 200A overcurrent cutoff, cell voltage balancing, and temperature monitoring. This extends battery lifespan and prevents dangerous overloads.
- 컴팩트하고 가벼운 디자인: Measuring approximately 20.47 × 8.54 × 8.86 inches (520 × 217 × 225 mm) and weighing 48.5 lbs (22 kg), this battery offers a 30% higher energy density than conventional models. Its space-optimized design is ideal for tight installations in RVs, marine vessels, and solar cabinets.
이미지: 앞면 view of the Anern 12.8V 200Ah LiFePO4 Lithium Battery, displaying its model number, voltage, capacity, and key specifications on a label.
Image: Diagram highlighting the battery's 10-year lifespan, lighter weight, and BMS protection features including overcharge, overload, overcurrent, short-circuit, and high-temperature shutdown.
Image: A visual comparison demonstrating that the Anern LiFePO4 battery is significantly lighter and smaller than a traditional AGM battery of similar capacity.
4. 설정 및 설치
Proper setup and installation are crucial for the safe and efficient operation of your Anern LiFePO4 battery.
4.1 초기 검사
Upon receiving your battery, inspect it for any signs of physical damage. If damage is found, do not proceed with installation and contact customer support immediately.
4.2 연결 지침
- 모든 연결 부분이 안전하고 적절하게 절연되어 단락을 방지하세요.
- Use appropriate gauge cables for your application to handle the expected current.
- Connect the battery to a compatible charge controller (e.g., MPPT solar controller) and inverter for solar energy systems.
- Observe correct polarity (+ to + and - to -) when making connections. Reversing polarity can cause severe damage.
4.3 용량 확장
The Anern 12.8V 200Ah LiFePO4 battery supports connection of up to 4 units for capacity expansion. This allows for the creation of a 51.2V 800Ah battery system, providing up to 40.96 kWh of energy and supporting a maximum 800A continuous charging/discharging current and 40.96 kW load power.
Image: An illustration of a solar power system, demonstrating how multiple Anern batteries can be connected in series and parallel to a solar module, MPPT solar controller, and solar inverter to power various appliances.
이미지: 측면 view of the Anern 12.8V 200Ah LiFePO4 Lithium Battery, indicating its dimensions (520mm length, 217mm width, 225mm height) and terminal specifications.
5. 사용 설명서
The Anern LiFePO4 battery is designed for deep cycle applications, providing stable and consistent power for various uses.
5.1 권장 적용 분야
This battery is ideal for:
- 태양 에너지 저장 시스템
- 오프 그리드 전력 시스템
- 레크리에이션 차량(RV) 및 Campers
- Marine Applications (e.g., Trolling Motors)
- 가정용 비상 전원 공급 장치
- Surveillance and Security Systems
Image: An Anern battery placed outside a motorhome, illustrating its use for providing electricity during extended trips.
Image: A collage depicting various suitable applications for the Anern battery, including solar systems, battery backup systems, caravans, trolling motors, and monitoring/security systems.
5.2 사용 참고 사항
The LiFePO4 battery may exhibit a 1-5% voltage/current variance across different measurement conditions. This is normal and does not indicate a defect. For optimal performance, ensure the battery is used exclusively for energy storage applications as intended.
6. 유지관리
The Anern LiFePO4 battery is largely maintenance-free due to its robust design and integrated BMS. However, following these guidelines will help ensure its long lifespan:
- 저장: If storing the battery for extended periods, maintain bi-annual charge cycles. This helps preserve cell health and prevents deep discharge.
- 청소: Periodically inspect and clean the battery terminals to ensure good electrical contact and prevent corrosion. Use a dry cloth for cleaning.
- 온도: Operate and store the battery within its specified temperature ranges to maximize performance and lifespan.
7. 문제 해결
Should you encounter any issues with your Anern LiFePO4 battery, consider the following basic troubleshooting steps:
- 전원 출력 없음: Check all cable connections for tightness and correct polarity. Verify that the battery's BMS has not triggered a protection mode (e.g., due to over-discharge, over-current, or extreme temperature). Allow the battery to rest or connect to a charger if deeply discharged.
- 충전 문제: Ensure your charger is compatible with LiFePO4 batteries and is functioning correctly. Check charger connections and input power.
- 특이한 냄새나 소리: Immediately disconnect the battery from all loads and charging sources. Contact customer support.
For more complex issues or if basic troubleshooting does not resolve the problem, please refer to the Warranty and Support section for assistance.
8. 사양
| 사양 | 값 |
|---|---|
| 모델 번호 | 12.8V 200Ah LiFePO4 리튬 배터리 |
| 공칭 권tage | 12.8 볼트 |
| 정격 용량 | 200아아 |
| 에너지 저장 | 2560Wh |
| 품목 무게 | 22파운드(9.98kg) |
| 패키지 크기 | 12.5 x 8.5 x 6.5인치(31.75 x 21.59 x 16.51cm) |
| 추천 용도 | Off-Grid Camping, Solar Energy Storage, Trolling Motor, RV |
| 재사용성 | 충전식 |
| 제조업체 | 아네른 |
| 상자 안에 무엇이 들어있나요? | 12.8V 200Ah LiFePO4 Lithium Battery x 1 |
9. 보증 및 지원
Anern is committed to providing high-quality products and excellent customer service. Your Anern 12.8V 200Ah LiFePO4 Lithium Battery comes with dedicated support to ensure your satisfaction.
Anern provides professional technical support and customer service, guaranteeing a fast response within 24 hours. Our expert team offers troubleshooting assistance, product optimization guidance, and lifetime maintenance advice to ensure your complete satisfaction. For any inquiries or support needs, please contact Anern customer service through the official channels.
