1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of the RAB Lighting B17 LED Bollard Light. This outdoor luminaire features field-adjustable wattage and selectable color temperature (CCT), designed for various outdoor applications.
주요 특징은 다음과 같습니다.
- Energy-efficient LED with a 50,000-hour lifespan.
- 조정 가능한 와트tage: 24W, 19W, or 14W.
- Selectable CCT: 3000K (Warm White), 4000K (Neutral White), or 5000K (Cool White).
- 0-10V dimming capability.
- 젖은 위치에 대한 UL 등재.
- Durable metal construction with a glass shade.
Figure 1: RAB Lighting B17 LED Bollard Light (Model B17D shown).
2. 안전 정보
경고: 감전 위험이 있습니다. 설치 또는 정비 전에 전원을 분리하십시오. 설치는 모든 관련 국가 및 지역 전기 규정에 따라 자격을 갖춘 전기 기술자가 수행해야 합니다.
- 공급 볼륨을 확인tage는 해당 고정물에 적합합니다.
- 작동 중인 구성 요소를 직접 다루지 마십시오.
- 적절한 개인 보호 장비(PPE)를 착용하세요.
- This fixture is suitable for wet locations. Ensure all connections are properly sealed to prevent water ingress.
- 제품을 개조하지 마십시오. 개조 시 보증이 무효화되고 안전상의 위험이 발생할 수 있습니다.
3. 패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- B17 LED Bollard Light Fixture
- On-Off Switch (Included Components)
- Installation Hardware (e.g., mounting bolts, gaskets) - (Assumed, not explicitly listed but typical for such products)
- 사용 설명서(본 문서)
4. 설정 및 설치
Follow these steps for proper installation of the B17 LED Bollard Light:
- 설치 장소 준비: Ensure the mounting surface is stable and level. Run electrical conduit and wiring to the desired location according to local codes.
- 전원 분리: 전기 작업을 시작하기 전에 차단기에서 전원을 끄십시오.
- Mount the Bollard: Secure the bollard base to the mounting surface using appropriate hardware. Ensure a watertight seal if required by local codes.
- 전기 연결을 만드십시오: Connect the fixture's wires to the supply wires. Follow standard wiring practices:
- Black to Line (L)
- White to Neutral (N)
- Green/Ground to Ground (G)
- Purple to Dimming (+) (for 0-10V dimming)
- Gray to Dimming (-) (for 0-10V dimming)
- 와트를 선택하세요tag전자 및 CCT: Before closing the fixture, adjust the wattage and CCT switches located inside the fixture head. Refer to Section 5 for details.
- Secure the Fixture Head: Attach the fixture head to the bollard body, ensuring all seals are properly seated to maintain the wet location rating.
- 복원력 : 차단기에서 전원을 켜고 전등이 켜지는지 확인하십시오.
Figure 2: The B17 Bollard Light is UL Listed and rated for wet locations, ensuring durability in outdoor environments.
5. 사용 설명서
5.1. Field-Adjustable Wattage
The B17 bollard light allows you to select the desired wattage output to optimize brightness and energy consumption. A switch located inside the fixture head enables selection between 24W, 19W, and 14W.
- 24W : 최대 밝기.
- 19W : Medium brightness, reduced energy use.
- 14W : Lower brightness, maximum energy savings.
조정하려면: Disconnect power. Open the fixture head. Locate the wattage selection switch and move it to the desired setting. Close the fixture head and restore power.
5.2. Selectable Color Temperature (CCT)
The fixture offers three color temperature options to suit different aesthetic preferences and applications. A separate switch inside the fixture head allows selection between 3000K, 4000K, and 5000K.
- 3000K: Warm White, ideal for creating a cozy and inviting atmosphere.
- 4000K: Neutral White, suitable for general illumination and task lighting.
- 5000K: Cool White, provides bright, crisp light, often used for security or modern aesthetics.
조정하려면: Disconnect power. Open the fixture head. Locate the CCT selection switch and move it to the desired setting. Close the fixture head and restore power.
Figure 3: Visual representation of adjustable wattage and selectable CCT settings.
5.3. 0-10V Dimming
The B17 bollard light is compatible with 0-10V dimming systems. Connect the purple and gray dimming wires to a compatible 0-10V dimmer control. This allows for smooth adjustment of light output from 100% down to 10% (or lower, depending on dimmer specifications).
Ensure the dimmer is rated for LED loads and is compatible with 0-10V dimming protocols.
6. 유지관리
The B17 LED Bollard Light is designed for minimal maintenance due to its long LED lifespan of 50,000 hours.
- 청소: 주기적으로 부드러운 천으로 고정장치 외부를 청소하십시오.amp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents. Ensure power is off before cleaning.
- 점검: Annually inspect the fixture for any signs of damage, loose connections, or wear. Ensure all seals remain intact to maintain weather resistance.
- LED 교체: LEDs are integrated and not user-replaceable. The long lifespan minimizes the need for replacement.
Figure 4: The B17 LED Bollard Light offers a long 50,000-hour operational lifespan.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명이 켜지지 않습니다. | 전원 공급이 없습니다. 배선 연결이 느슨합니다. 잘못된 와트tage/CCT setting. | Check circuit breaker. Ensure power is on. 모든 배선 연결이 단단히 고정되었는지 확인하십시오(먼저 전원을 끄십시오). 왓을 확인하세요tage/CCT switches are set correctly. |
| 예상치 못하게 불빛이 깜빡이거나 어두워집니다. | 호환되지 않는 조광기입니다. Loose dimming wire connection. 권tag전자 변동. | Ensure 0-10V dimmer is compatible with LED loads. Check purple and gray dimming wire connections. 전기 기술자에게 문의하여 전원 공급의 안정성을 확인하세요. |
| 광량이 너무 낮거나 높습니다. | 잘못된 와트tag전자 설정. | 와트를 조정하십시오tage selection switch inside the fixture head (power off first). |
| Light color is not desired. | CCT 설정이 잘못되었습니다. | Adjust the CCT selection switch inside the fixture head (power off first). |
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델명 | B17 |
| 상표 | 랩 라이팅 |
| 왓tage | Field-Adjustable: 24W / 19W / 14W |
| 색온도(CCT) | Selectable: 3000K / 4000K / 5000K |
| 디밍 | 0-10V 디밍 가능 |
| 수명 | 50,000시간 |
| 재료 | Metal body, Glass shade |
| 환경 등급 | UL Listed for Wet Locations |
| 포함된 구성 요소 | 온 / 오프 스위치 |
| 한국어: | 192552028424 |
| ASIN | B0DY2FPPNS |
9. 보증 및 지원
For warranty information and technical support, please contact RAB Lighting directly. Refer to the official RAB Lighting web구체적인 보증 조건과 연락처 정보는 해당 사이트나 구매 문서를 참조하세요.
RAB Lighting Contact: www.rablighting.com
